Latest water proofing coating Tenders | Government water proofing coating Tenders

State Government

CTN :41355800

12 Aug, 2025 NA

Delhi - Delhi

Tender For repairing of delivery line of pumpset no.7 and 8 along with allied work at 2nd 40 mgd cwph plant at wazirabad water works. (re-invite) - hydraulic excavator (3d) with driver and fuel.dsr no. 0020, hire and running charges of crane 20 tonne capacity.dsr no. 0028, pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.dsr no.14.23, providing and constructing bund with filled up earth in empty (pvc) cement bags (excluding the cost of earth which will be available at site of work) i/c stitching and stacking and placing in position etc. complete and i/c cost of empty plastic bags and removal of the same after completion of the work. providing and stacking of earth filled gunny bags to make the bund to give the dry condition of work. dsr no.26.1.19, taking out ms pipes of 600mm dia. from the trenches after de-jointing and stacking the same along the trenches within a lead of 50 meters. approved rates., providing ms pipe fabricated/manufactured out of ms plate of steel grade fe410 as per is 3589:2001 or out of hr coils of same/equivalent grade;coated internally with food grade epoxy and externally/outside with epoxy coating;complete in all respect as per relevant is codes with upto date amendments and as directed by engineer-in-charge.600mm nominal dia. (clear internal dia.) pipes of 8mm thickness (min.).approved rates.make skf / fag, laying in position m.s. pipes/steel cylinder reinforced concrete pipes suitable for rubber ring jointing or welding or flanged jointing (excluding cost of pipe). approved rates., 50 % neoprene (1.5 mm to 25 mm).sor no.22.6.1, cast iron non rising sluice valve of size 600mm, pn 1.0 for clear water application, flanged end as per is : 14846 body,dome,wedge- ci is:210, gr.fg260 body & wedge rings bronze is:318 gr. ltb2, spindle-ss is:6603, gr.12cr12, gland packing- greasy jute, packing fasteners- cs, is:1367, cl-4.6/4.0, gasket natural rubber, flange drilling - is:1538, table 4 & 6.make :- kbl /ivc/djb approved. sor.4.12.13, providing of ms flange(1set) suitable for the above sluice valve along with suitable size nut-bolts for making flange joints complete as per site requirement., installation of sluice valves with the help of all labour like fitter, welder, cutter, helper, beldar, chowkidar, supervisor, electrician and material used like welding machine, cutter set i/c oxygen cylinder, welding road t&p along with its all transportation loading, unloading complete at site of work., testing and commissioning of sluice valve on full pressure as per satisfaction of engineer-in-charge.

CTN :39446532

07 Aug, 2025 1.53 Crore

Pune - Maharashtra

Tender For bid to ras bid to ras bid to ras tender for supply of 100 percentage ethylene oxide gas cartridge 100gms , chem 8 cartridge for i stat compatable with i stat system portable blood analyzer , c arm covers sterile disposable , endo loop , endopath endoscopic bowel clamp with ratchet , endopath specimen retrieval bag , anti fog solution with 4 percentage alcohol concentration , bowie dick test pack chemical indicator class ii , chemical indicator tape roll for steam steriliser roll of 50 mtrs , chemical indicator class iv 1251 for steam 240 pieces per box , chemical integrator class v 1243 a for monitoring time temperatustre and steam penetration 500 pieace per packet , biological indicator 30 vials per box , process challenge device 3.0 hpr for steam , rpbms record producible bowie dick strip for steam , chemical indicator strips for eto sterilizer , eto chemical indicator tap , load control biological indicator for eo sterilization , class 4 plasma indicator with adhesive- made up of plastic for plasma sterilization box of 3200 , process challenge device 1.5 hpr for plasma , hmbi biological indicator 30eam case for plasma sterilizer , self seal sterilization pouch for steam eto and plasma 20 x 22 cm pkt of 200 , self seal sterilization pouch for steam eto and plasma 32 x 39.5 cm pkt of 200 , tyvek roll 20 cm x 70 mtr with plasma and eto indicators with iso 11607 and ce certifications , tyvek roll 41.25 cm x 70 mtr with plasma and eto indicators with iso 11607 and ce certifications , tyvek self seal pouch with plasma indicator size 20cm x 27.5cm pack of 200 , tyvek self seal pouch with plasma indicator size 22cm x34cm pack of 200 , tyvek self seal pouch with plasma indicator size 33cm x 34 cm pack of 200 , sterilization wrap with sms fabric and 99 percentage bacterial filtration efficiency 36 inch x 36 inch , balanced electrolyte solution with ph 7.4 and osmolarity 290 to 300 in self collapsible bag of 1000 ml. , balanced electrolyte solution with ph 7.4 and osmolarity 290 to 300 in self collapsible bag of 500 ml , sodium lactate compound ringer lactateisotonic solution 500ml self collapsible container ffs technology , embryo reduction needle , 35 mm x 10 mm plates ivf grade mea tested pack of 500 , denuding pipette stripper 135 to 140 microns ivf grade packof 10 , denuding pipette stripper170 to 175 microns ivf grade pack of 10 , cover slip packet of 10 gm , embryo glue 10ml , humidification bottle and filter for trigas benchtop incubator cook , slide , microscope , thickness 1.15 to 1.35mm size 75mm x 25mm , 2.7 1.5 detachable tip 3 cm dmso compatible neuro microcatheter like apollo , microguidewire , nitinol constrction , hydrophilic coating angled tip 0.014 inch diameter at least 180 cm length , evoh co polymer with dmso opacified for embolisation like onyx squid concentration to be specified at time of purchase , 14ml tube poly round bottom tubes individually packed ivf grade mea tested pack of 500 , antiseptic spray non embryotoxic of 1 litre human ivf grade , ivf media pack consisting of 1 x 50ml90 percentage densitygradiant , 1x 45 percentage density gradiant , 2 x50 ml fertilization. 2 x50 ml flushing media with proteins hepes , 4 x clevage media 1x100 ml all gradewash , 1 x 100 ml ivf grade oil , stapper handle for embryo handling

Central Government/Public Sector

CTN :41314575

23 Aug, 2025 NA

Raigad - Maharashtra

Tender For tender for supply of neoprene rubber sheet , oil paper sheet 0.25 thk , polythene bags 4 inch x6 inch . , oil paper sheet 0.375thk , lead wwire - 4.0 mm , oil paper sheet 0.5 thk , lead wire dia 8mm , polythene bags 6 inch x8 inch . , oil paper sheet 0.75 thk , sling web , flat , 1/2t x 2me , bar thrd en8 m6x1000mm , lead wire dia - 0.3 mm , 2 inch wide al.permacel tape , plastic adhesive brown tape50 mmx50 m , slings 1t 1me , tape ptfeo.01x1.25x1200cm , web sling 1t x 3 me , wire brush 2 inch ms , hacksaw frame , 6 inch , polythene bag 10 inch x12 inch . , tape ptfe size 25.4 mm , sheetruberis638 a3mm x 1 x 1 , p-601 cloth tape 10cmx55m , 3 inch wide al.permacel tape , thrd bar en8 m20 , h.d.p.e.rope 100me x 6 mm , teflon rod 1 inch dia , manila rope 3/4 inch x 220 me , manila rope 1 inch x 220 me , ms bristle brush 6 inch x3 inch x , ss bristle brush 6 inch x3 inch x , barthreaded en8 m8x1000mm , white silicone grease , crc 2-26 spray (elec) , barthreaded en8 m10x1000m , hylomer liquid sealing compound , barthreaded en8 m12x1000m , hacksaw blade 24tp , expanded ptfe sheet 1.5x3 , manila rope 1/2 inch dia. , plastic bucket 15 lt. , plastic bucket 20 lit. , sheet teflon 1x600x600 mm , safety solvent 8060 electrical 88 , cloth cotton 1mx1m length , hacksaw blade 18tp , barthreaded en8 m16x1000m , teflon rod 1.1/2 inch x 300mm , rustoline in 500 ml tin , graphite adh.tape 3/4inch , tape ptfe rolls champ .07 , heet teflon 0.5mm x1mx1m , homacole 5 lit pack , oil cup 1/4 inch npt male , round teflon 50mm x 300mm , locktite super bonder 495 , molycote 1000 antiseize c , pvc coating spray , rtv 732 adhesive , cotton rags of muslin cloth size 42sq.in , r metal/cerami tech eg , rust loosener spray cans tf-77 400ml , molycote zinc spray . , e metal/metal tech rg , penetrating oil spray-500ml , super glide 1341/cerami-tech cr , tarpaulin , stainless steel shovel , saw dust , hand gloves rubber 14 inch , hammer 5 kg , hammer 3 kg , citizen electronic calculator ct 500 (12 , stapler no 10 small (kangaroo make) , parmanent marker pen colour black , parmanent marker pen colour blue , parmanent marker pen red , parmanent marker pen colour green

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :41291783

11 Aug, 2025 NA

Gurdaspur - Punjab

Tender For supply of 0 degree hinges , black screw , wpc board 18mm , labour charge , fevicol , dashboard polish , tyre polish , perfume , plastic parts with crystal coating polish , water separator filter , knuckle bush , knuckle bearing , oil seal , needle bearing , lock washer , ac spring , shaft bolt , shaft patti , jointer 12mm , odonil , vip double hackey , vaddish phool bahari broom , thermocol poocha 2 in 1 , gala daily care floor whip , maximile ultra v4 6l , tubeless puncture , tubeless tyre puncture , tyre puncture , puncture repair , gypsy fan belt , maximile power steering fluid , water boc , vele crown , heatex 2ltr , stitching cost , 8 box smock candle , rangoli colour , tape 13 x 8 , tape 8 x 12 , tape 6 x 8 , flex roll , threads , cloth , duracell , potassium permanganate 1 x 10gm , black paint , green paint , white paint , brown paint , tarpin oil , spray , tape 40 mtr , tape 40 mtr brown 2 inch , flair pen , camel permanent marker black , flouroscent paper a4 mix , ohp set marvy permanent marker , star stencil english 30mm , omega stencil english 35mm , spiral note 200 pages , pilot v5

State Government

CTN :40314448

14 Aug, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v

CTN :41225211

16 Aug, 2025 NA

Delhi - Delhi

Tender For supply of cardiology d d - multi electrode renal denervation catheter , sterile pb free radiation safety drape for protection during radial procedure must be bis certificate model pb equivalent should not be more than 0 point 125mm , sterile pb free radiation safety drape for protection during femoral procedure must be bis certificate model pb equivalent should not be more than 0 point 125mm , radial introducer sheath with patent unique cross cut design haemostatic valve surflash 20g multiple 2 entry needle plastic iv catheter and 0 point 025 mini plastic guidewire , 60 mhz coronary imaging catheter with bioslide hydrophilic coating 0 point 026 entry profile 15mm distal marker to transducer , angiosculpt cutting balloon usfda ce approved , everolimus eluting platinum chromium coronary stent system combination of highly visible ptcr alloy innovative stent design and enhanced stent delivery system , cutting balloon 2 4mm dia into 6 10 15 mm lengths non compliant balloon mounted with microsurgical atherotomes 0 point 0 17 entry profile hydrophilic coating 143 cm , coronary cutting balloon microsurgical dilatation devices ) /bid number : gem/2025/b/6497101 * /dated: 26-07-2025 & & / bid document 1 / 13

CTN :41192235

08 Aug, 2025 13.23 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of gym equipment file no. 106/24x2/10, 4th call - ac motor - 4.5hp/8hpspeed - 1.0-22.0 kmphincline - 0-20% automaticrunning area - 1620x600 mm, 65x24 inch (approx)user weight - 200kg max, fly wheel - 20kg fly wheelsteel wheel - transportation wheel for easy transportuser weight - 150kg max, fly wheel - 18kg fly wheelbrake - fiction breaking system & emergency locksaddle - horizontally & vertically adjustiblehandle bar - vertically adjustable user weight - 150 kg max, square tube - 50x100mmweight stacks - 40 kgnw/gw 60 kg/ 66 kg, minimum size - 1570x660x700 mmcaps - all caps are in round metalnw/gw - 21.2kg/22.6kg, monitor - time speed distance calories ressistance - wind resistance rowing machines with 10 levels adjustment machine size - 2350x630x360 mmuser weight - 230 kg maxnw/gw 31kg/37kg, frame size - 50x70 mm squareweight stack - 110lbs x 4 (440lbs) plastic coating weight (pvc) plates & cast cement insidemachine - high density upholstered seat & back pads high intensity navigation durable wire steel with 6 mm diameter, tube - high strength steel tube precision weld cable - internally lubricated cable 6 mm square tube 50x100 mm (2.5 mm thickness) cover - with both side full metal seat cushion - 65mm thickness caps - all caps should be in metal size - 1650x1030x1630 mm weight stack - 110kg (steel) nw/gw - 257kg/291kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thickness) seat cushion - 65mm thickness, caps - all caps should be metal, size - 1500x710x990 mm, type - plate loaded machine, nw/gw - 52kg/63.6kg, tube - high strength steel tube precision weld, cable - internally lubricated cable 6 mm, coating - two round powder coating, square tube - 50x100mm, thickness - 2.5mm, size - 1140x940x1370mm, weight stack - 100 kg (steel), machine weight - 190 kg, tube - high strength tube precision weld, machine - high quality functional trainer, coating - two round powder coating, type - fully commercial, cable - 6 mm, weight stack - 100x2 kg, machine weight - 350 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube 50x100 mm (2.5mm thick), size - 1400x680x420 mm bench weight - 30 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100 mm (2.5mm thick), size - 1650x680x1000mm nw/gw - 40kg/46.2kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1060x680x1000mm nw/gw - 21kg/24.8kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1380x680x690mm nw/gw - 34kg/40kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1320x840x970mm , bench weight - 75 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1800x600x800mm , bench weight - 115 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thick), size - 1500x700x100mm, rack weight -75 kg, frame tube - flat oval 50x100x2.5t, square tube - 50x2.5t, cushion 1 - 895x360x55mm, cushion 2 - 455x205x55mm, cushion 3 - 550x520x55mm, cushion 4 - 454x408x55mm , cushion 5 - 250x140x80mm, size - 225x1357x1385mm, type - plate loaded machine, nw/gw - 259kg/298kg, frame tube - rectangular tube 50x80x2.5t, size - 1995x1910x2350mm, weight stack - 80x2 = 160 kg, net weight - 360 kg, size - 2.5kg, 5kg, 7.5kg, 10kg, 12.5kg, 15kg, 17.5kg, 20kg, 22.5kg, 25kg, 30kg, size - 10kg, size - 7.5kg, 10kg, 12.5kg, 15 kg, size - 3feet, 4feet, 5feet, 6feet, size - 3feet, 4feet, size - 18 inch, tricep handle, tricep rope, rod stand, size - 1kg, 2kg, thickness - 38mm, length - 15m, curl rod olympic 3 4, pushup stand, olympic weight dead lifting, skipping rope,

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

State Government

CTN :41179796

12 Aug, 2025 NA

Port Blair - Andaman And Nicobar Islands

Tender For supply of consumable items for srl g. b. pant hospital - name of the item, serum vials 2ml, edta tubes k2 violet 6ml, edta tubes k3 violet 6ml, surgical spirit 400 ml, cotton roll material 100% cotton surgical grade purified bleached and carded - water absorbent, gloves 7 inches non chlorinated, micropipette 10 microlitre (ul), micropipette 50 microlitre (ul), micropipette 100 microlitre (ul), micropipette 200 microlitre (ul), microtips 2-100 microlitre (ul) per pkt 1000 nos, conical tube 2 ml cap with epdm o ring brand - tarson, white plastic container 15cm x 10cm x 5cm, label l-3.5cm b-2.5cm per pkt 1000 nos, sodium hypochlorite solution 5% 5 ltr per cane, bmw bags color-black non chlorinated, bmw bags color-red non chlorinated, bmw bags color-yellow non chlorinated, head cap disposable- good quality, shoe cap disposable- good quality, safety goggles reusable medical safety goggles polycarbonate clear and transparent scratch resistant anti fog coating adjustable strap (clips)

Water Proofing Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others

State Government

Corporations And Associations And Others

State Government