Water Proofing Compound Tenders

Get complete information related to latest Water Proofing Compound Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Water Proofing Compound Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Water Proofing Compound Tenders .

Filter

Loading....

Get Tender in Email

CTN :42854378

15 Dec, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of general maintenance items : - tmt bars fe 550 12 mm dia , tmt bars fe 550 grade 10mm dia , tmt bars fe 550 grade 08mm dia , ms binding wire not less than 0 point 9mm dia , load bearing concrete hollow blocks of size 400mm x 200 mm x 200 mm , water proofing compound conforming to relevant is make jk or birla , quick setting compound , steel screw full threaded half inch , steel screw full threaded 1 inch , steel screw full threaded one by four inch , cement opc 53 grade , sand , aggregate 20mm , aggregate 40mm , ppgi 3600 by 1130 point 5mm , ppgi 3733 by 1130 point 5mm , ppgi 4200 by 1130 point 5mm , tapping screw 55mm , shelf tapping screw 25mm , rivet , change over 100 amp , window 38 x 47 inch , window 20 x 47 inch

Central Government/Public Sector

CTN :42887331

20 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including

CTN :42830852

11 Dec, 2025 10.26 Lacs

Chamoli - Uttarakhand

Tender For tender for supply of various electrical items : : - supply of led tube light , 36 watt (as per technical specification) , supply of led tube light , 10/12 watt (as per technical specification) , supply of concealed light 6 watt (as per technical specification) , supply of led flood light 100 watt (as per technical specification) , supply of led flood light 200 w for high mast (as per technical specification) , supply of 1 sq mm single core copper cable (phase wire) , conductor material annealed bare copper (as per technical specification) , supply of 1.5 sqmm single core wire (phase wire) (as per technical specification) , supply of 2.5 sqmm single core wire (phase wire) (as per technical specification) , supply of 16a 3 pin plug (as per technical specification) , supply of hot air blower for electrical panel moisture remover (as per technical specification) , supply of electrical switch (as per technical specification) , supply of cable lugs for facilitate connection to electrical terminals (as per technical specification) , supply of cable lugs for facilitate connection to electrical terminals (as per technical specification) , supply of hydrometer for battery specific greavity measurement (as per technical specification) , supply of ht tape for waterproofing , corrosion protection , jointing and repair of cables. (as per technical specification) , supply of exhaust fan for propeller type ac ventilating fans.(as per technical specification) , supply of cable lugs for facilitate connection to electrical terminals. (as per technical specification) , supply of non modular fan regulator (as per technical specification) , supply of piano type modular fan regulator (as per technical specification) , supply of door bell (as per technical specification) , supply of 10 amp single pole mcb (as per technical specification) , supply of led tube light 18 watts , 4 pin (as per technical specification) , supply of cable lugs for facilitate connection to electrical terminals , lugs material aluminimum (as per technical specification)

State Government

CTN :42756396

05 Dec, 2025 NA

Rupnagar - Punjab

Tender For purchase of recovery and rejuvenation lab equipments - percussion massager (gun massager), key features- percussive action: a percussive action that provides rapid and repetitive strokes to muscles and tissues- adjustable speed: adjustable speed settings to customize the massage experience- multiple attachment heads: multiple attachment heads for targeting different muscle groups and areas of tension- ergonomic design: ergonomic design for comfortable grip and reduced fatigue- blue tooth integration- powerful motor with 37 pounds of stall forceperformance specifications- speed range: with at-least 3 speed variation with lcd screen display- build in led light therapy- built in biometric sensor- guided breath workbattery life usb - c chargingattachments- standard ball- dampener- thumb- micro point- wedge-to emit heat- for cold treatmentsafety features- overheat protection: overheat protection to prevent damage to the motor and ensure safe use- automatic shut-off: automatic shut-off feature to prevent prolonged use and reduce risk of injury- soft start: soft start features to prevent sudden jolts or shocksadditional features- portability: compact and lightweight design for easy transport and storage- quiet operation: quiet operation for discreet use in various settings- customizable settings: customizable settings for personalized massage experiencecertifications: ce , fda clearance, vibration platform, adjustable frequency- 15hzs to 40 hzamplitude setting- 80 watt, pmdc motor supports upto 150kgremote control operatedatleast 3 preprogrammed modes non slip platform, steam room, steam generator- power output: generator should match a steam room of appox. 50 to 200 cubic footage (6-7.5 kw)- installation location: should be installed upto 60feet away from the steam room, ideally in a closet or heated attic/basement- features: automatic flushing, aromatherapy, and energy efficiencyroom design and materials- waterproofing: apply a waterproof membrane to walls, floor, and ceiling to prevent moisture damage- tiling: use non-porous tiles like porcelain or glass, and ensure a slight slope for water drainage- flooring: choose textured or anti-skid tiles to prevent slipping- insulation: insulate walls and ceiling to preserve heat and increase energy efficiencyventilation and safety- ventilation system: install an exhaust fan, sloped ceiling, and floor drain to remove excess water and maintain air quality- door and seals: ensure a properly sealed door with tempered glass, tight seals, and corrosion-resistant materials- lighting: use waterproof, sealed light fixtures like harvia fiber optic lightscontrol panel and accessories- control panel: install a touchscreen panel to control temperature, lighting, music, and aromatherapy- seating: choose water-resistant materials for benches, and consider fold-down seats or heated seats for luxury- aromatherapy: use essential oils to enhance thesteam room experience., sauna room, sauna heater with thermostat- type: electric, wood-burning, or infrared heater.power output: heater should match sauna room with 50-200 cubic footage (5-8 kw)room design and materials- insulation: high-quality insulation materials like mineral wool or fiberglass to maintain heat and energy efficiency- wood: durable, heat-resistant woods like cedar, aspen, or hemlock for interior lining- flooring: non-slip flooring materials like ceramic tiles or wood with a textured finish- ventilation: proper ventilation with adjustable vents to control airflow and humiditysafety features- temperature limiter: install a temperature limiter to prevent overheating and ensure safety- guardrail: install a guardrail around the heater to prevent accidental contactlighting: use heat-resistant lighting fixtures and ensure proper wiring and electrical safety control unit to regulate heat, foam rollers, material and density- eva (ethylene-vinyl acetate) foam: a popular choice for foam rollers due to its durability and comfort.- high-density foam: provide

Loading, Please wait...

Water Proofing Compound Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government