Latest water treatment chemicals Tenders | Government water treatment chemicals Tenders

CTN :42974634

19 Dec, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of cooling water treatment chemicals(as per is8188:1999)from 01.02.2026 to 31.03.2027 for stg-iv-enq

CTN :43112008

24 Dec, 2025 NA

Jorhat - Assam

Tender For supply of dna ladder markers 50bp , dna ladder markers 100bp , dna ladder markers lamda hind iii , loading dye , ethdium bromide , glacial acetic acid analytical grade , sterile glycerol 50 percent , methanol ar or acs , ethanol analytical , sodium hypochlorite naocl 5 percent solution , ethanol molecular grade , muller hilton agar , bacterial gram staining kit , luria bertani agar , agar powder , chelex 100 rasin , cryobox for centrifuge tube , sample storage freezer rack minus 80 degree , pcr flat tubes , gel casting trays with combs , optical 96 well reaction plate , optical adhesive film for qpcr use , magnetic stirrer beads 35x8mm , magnetic stirrer beads bar remover 250mm , rack graduated filter tips 10 ul , rack graduated filter tips 200 ul , rack graduated filter tips 1000 ul , purple nitrile gloves l size , purple nitrile gloves m size , micro centrifuge tube , micro centrifuge tube 2ml , tips 2 to 200ul , tips 200 to 1000ul , tips 2 to 10ul , pcr rack 96 wells , 50 ml falcon tube rack , glass reagent bottle , syringe 20ml , syringe 10 ml , syringe 5ml , n95 mask , surgical mask , sterile cotton , muslin cloth , autoclavable cotton , zip lock bag , zip lock bag small , steam indicator tape or autoclave tape , tissue roll

CTN :43102526

18 Dec, 2025 2.38 Lacs

Jaipur - Rajasthan

Tender For ward no. 21 in vidhadhar nagar in patak pachhad hanuman park sector 2 in installing open gym work - cross trainerproviding and fixing of cross trainer of size not less than 1140mm (length) x 625mm (width) x 1750mm. (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up of at least 25nb c class g.i. pipe. the footrests shall be made from lldpe/aluminum casting material of size not less than 130 mm x 310mmx5mm thickness and mounted on m.s. plate of size 130mmx310mmx3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thicknesses complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in- charge to fulfill the functional requirement., seated pullerproviding and fixing of seated puller of size not less than 2400mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be minimum of 32nb c class g.i. pipe. the seat frame minimum of 50nb c class g.i. pipe, closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., chest pressproviding and fixing of chest press of size not less than 2200mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up from at least 32nb c class g.i. pipe. the seats and back rests to be fitted on the outer frames shall be made up of m.s. sheet of size not less than 330mm x 300 mmx2mm thickness. closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., pommel horseproviding and fixing of pommel horse of size not less than 2150mm (length) x 800mm (width) x 800mm. (height), to enhance the flexibility of lower limbs, waist and abdomen. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame be minimum of 32nb shall be made from c class g.i. pipe. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powder ackzonoble/ berger/ nerolac paints with 60 to70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-

State Government

CTN :43117587

23 Dec, 2025 NA

Manaparai - Tamil Nadu

Tender For procurement of cooling tower water treatment chemicals on package cost basis for pulpmill of tnpl unit ii

CTN :43049287

15 Dec, 2025 NA

Kolkata - West Bengal

Tender For supply of dental consumable dglp 2 d d -paper glass perforated fine 7. 6 cm wide roll of 25 mtr sand paper , acrylic resin for maxillofacial prostheses polymer plus monomer , all ceramic dentin powder shade a1 bott of 20gm , all ceramic dentin powder shade a2 bott of 20gm , all ceramic dentin powder shade a3 bott of 20gm , all ceramic dentin powder shade b1 bott of 20gm , all ceramic dentin powder shade b2 bott of 20gm , metal ring set for casting set of 4 , vita glaze powder 5 gm , ceramic crucible for casting pkt of 06 , arti-spot-2 high spot indicator bott of 15 ml , beading wax box 113 gm , boxing wax box 6 sheet , de-bubblizer 1000 ml

State Government

CTN :43022860

15 Dec, 2025 NA

Karur - Tamil Nadu

Tender For procurement of cooling tower water treatment chemicals monitoring and maintaining the water quality parameters of cooling tower 1 (paltech make) cooling tower 2 (sriram make) and vam at unit i

CTN :43036406

18 Dec, 2025 10.00 Lacs

Ganganagar - Rajasthan

Tender For work of providing and fixing open gyms in various parks in the municipal council area (mla lad) - surfing boardproviding and fixing of surfing board of size not less than 1000mm (length) x 600mm (width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. the main structure frame shall be made from g.1. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 0250 mm & 10mm thick. the footrests shall be made from high quality fiber reinforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder coating shall be done with pure polyester powder of ackzonoble berger/ nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including.), thai-chi spinner (2 wheel)providing and fixing of thi-chi spinner (2 wheel) of size not less thal 700mm (length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. the main structure frame shall be made from g.i pipe minimum of 80 bn "c" class welded with m.s. round base plate atleast 250mm & 10 mm thick. high tensile s.s. nut bolts shall be used for assembly. the powder casting shall be done with pure plyester powders from ackzonoble/berger/nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the m.s. hodfast in cement concrete to hold the whole structure, under the direction of engineer-in-charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including), leg pressproviding and fixing of leg press of size not less than 1840mm (length) x 360mm (width) x 1560mm. (height) to build up the muscles of thigh and enhence the strength of waist. the mian structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the sleeve frame minimum of 100 od and m.s. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame. the footrests shall be made from casted aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), double standing twisterproviding and fixing of double twister standing of size not less than 1500mm (length) x 600mm (width) x 1300mm. (height) to enhence flexibility of waist. the main structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the handle frame is minimum of 25nb shall be made from "c" class g.i. pipe. the twister plate to be fitted on the bottom frame shall be made up of m.s. roaund plate of minimum size 300mm and 10mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac paint with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), construction of foundation/inaugration pedst