Latest weir repair Tenders | Government weir repair Tenders

CTN :45399576

08 Jun, 2026 5.08 Lacs

Moradabad - Uttar Pradesh

Tender For lot 09 repair of syphon at km. 8.600 of shahpur minor in distt. moradabad.

Central Government/Public Sector

CTN :45371767

18 Jun, 2026 NA

Ferozepur - Punjab

Tender For certain b/r repair to plumbing sanitary items pvc doors and other allied works in various md accn in area of age b/r ii of ge (west) ferozepur - demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed., dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed., demolition of brick work built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed., taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., m&l for taking down existing stop valve / bib cock 15 mm bore by replacing head/washer/spindle/cap etc and refixing the same complete all as specified and directed., m&l for taking down existing low level flushing cistern and refixing after replacing the syphon, ball valve with washer and flush handle complete all as directed., demoletion and breaking up drain pipes 110 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, demoletion and breaking up drain pipes 75 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed., m&l for brick work built in cement mortar (1:6) with sub class b old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed., s&f 50mmx47mm size solid pvc door frame made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified shown on drawing and specified and directed., s&f factory made 30mm thick (style) solid panel pvc door shutter consisting of frame made out of ms tubes for top & bottom rails, ms frame covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 b.2.1 of mes schedule part-ii (2004) complete all as specified shown on drawing and specified and directed., s&f ptmt tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed., s&f ptmt butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed., s&f ptmt handle 150mm long fixed with steel screws complete all as specified and directed., m&l for 25mm thick plain cement concrete (1:2:4) type b-0 using 12.5 mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed., m&l for 10 mm thick (square/ rectangular) light shade vitrified tiles coloured, premium quality, joint-free, area of eac

State Government

CTN :45257984

29 May, 2026 17.71 Lacs

Washim - Maharashtra

Tender For corrigendum : k.t.weirs repairs with nala deepning at kurhad tq karanja dist washim

State Government

CTN :45246151

01 Jun, 2026 8.01 Lacs

Guntur - Andhra Pradesh

Tender For surplus weir repair in enamadala village prathipadu mandal guttivari mi tank

State Government

CTN :45246153

01 Jun, 2026 8.14 Lacs

Guntur - Andhra Pradesh

Tender For surplus weir repair inenamadala village prathipadu mandal south mi tank

CTN :45230066

28 May, 2026 17.29 Lacs

Hanumangarh - Rajasthan

Tender For repair of hlm syphon well and sog syphon d/s well at rd 135.148 of gdc with protection work

State Government

CTN :45228878

28 May, 2026 17.29 Lacs

Hanumangarh - Rajasthan

Tender For repair of hlm syphon well and sog syphon d/s well at rd 135.148 of gdc with protection work

Co-operative

CTN :45096131

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of instrument spare and annual maintenance contract - circular charts:- i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :- i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :- i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:- i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:- i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:- i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:- a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :- (i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :- i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :- (i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amc super-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit

CTN :45084254

12 May, 2026 1.14 Crore

Thane - Maharashtra

Tender For repair of super passage ch.8440m canal syphon ch.18790m and ch.12945m and slab culvert ch.19305m of surya right bank canal palghar branch no.2