Latest welding machine Tenders | Government welding machine Tenders

Central Government/Public Sector

CTN :45366634

19 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cutting holes in

Central Government/Public Sector

CTN :45119429

08 Jun, 2026 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of portable welding machine (v2) (q3) , resistance welding equipment / rocker arm spot welding machine as per is 4804 (q3)

Central Government / Public Sector

CTN :45372236

26 Jun, 2026 NA

Multi City - Multi State

Tender For supply of hc65i torch head or equivalent suitable for m/s techno crats air plasma cutting machine with the model of kalicut-25. ]

Central Government/Public Sector

CTN :45359011

11 Jun, 2026 NA

Burnpur - West Bengal

Tender For supply of 1. emergency cutting torch, 4500mm , 2. emergency cutting torch, f/bbl caster

CTN :45377263

16 Jun, 2026 NA

Multi City - Multi State

Tender For supply of tungstun inert gas welding machine

CTN :45363384

15 Jun, 2026 NA

Theni - Tamil Nadu

Tender For supply of mig and tig welding machines for mechanical department (fsd lab)

CTN :45357458

11 Jun, 2026 89

Multi City - Karnataka

Tender For procurement of electrical items - waterproof tape_kh, single way switch open box_kh, single way switch closed box_kh, spike guard_kh, streetlight 36watt_kh, streetlight 24watt_kh, emergency torch light_kh, dp switch 63a_kh, dp switch 32a_kh, cg holder shaft cap_kh, cg holder-cu_kh, copper wire 4sqmm smoke free_kh, copper wire 2.5sqmm smoke free_kh, copper wire 1.5sqmm smoke free_kh, led tube light-4feet 36w _kh, led tube light-4feet 20w _kh, ms fittings with dual clamps 1p5 inch_kh, ms fittings with dual clamps 1p25 inch_kh, bed switch-normal_kh, switch-6a_kh, serial set lights-for building_kh, socket-6a support_kh, socket-16a support_kh, portable solar lighting kit_kh, switch box-open type box (10 or 12model)_kh, on and off light controller_kh, wire stripper multi option_kh, mcb 2pole 32 amps_kh, mcb single pole 32 amps_kh, mcb pvc cover_kh, streetlight 72watt_kh, streetlight 60watt_kh, streetlight 50watt_kh, streetlight 100watt _kh, led flood light 200watt_kh, led flood light 150watt_kh, led flood light 100watt_kh, flat ended 4c cable 4sqmm_kh, angle holder wall mount_kh, wall mount fan normal_kh, solar streetlight 24w_kh, screwdriver set_kh, led bulbs 9watt pin type_kh, led bulbs 50watt pin type_kh, led bulbs 30watt pin type_kh, led bulbs 20watt pin type_kh, led bulbs 18watt pin type_kh, led bulbs 15watt pin type_kh, led bulbs 14watt pin type_kh, led bulbs 12watt pin type_kh, led bulbs 10watt pin type_kh, electrical tester_kh, electrical insulation tape_kh, emergency bulb 9w_kh, cutting player-industrial grade_kh, ceiling fan 75_kh, aluminium cable 6sqmm single stand_kh, aluminium cable 4sqmm single stand_kh, aluminium cable 2.5sqmm single stand_kh, aluminium cable 2c6sqmm flat_kh, aluminium cable 16sqmm single stand_kh, aluminium cable 10sqmm single stand_kh, solar streetlight with battery-aio set_kh, solar streetlight wop-aio set_kh, single phase metal meter box_kh, solar panel - 80w_kh, solar panel - 60w_kh, solar panel - 50w_kh, soldering iron kit_kh, insulator breaker_kh, gi pole 6 meter_kh, gi 3mm messenger with pvc wire_kh, gi 3mm messenger wire_kh, nylon cable tie 300mm_kh, nylon cable tie 200mm_kh, nylon cable tie 100mm_kh, aluminium cable 6sqmm single stand 450meter_kh, aluminium cable 6sqmm single stand 270meter_kh, aluminium cable 10sqmm single stand 450meter_kh, aluminium cable 10sqmm single stand 270meter_kh, solar driver 50watt_kh, solar driver 30watt_kh, solar driver 24watt_kh, solar driver 20watt_kh, lead acid battery 250ah_kh, lead acid battery 150a_kh, lead acid battery 100a_kh, lifepo4 battery 30ah_kh, lifepo4 battery 24ah_kh

CTN :45361360

15 Jun, 2026 82

Udupi - Karnataka

Tender For procurement of stationary items and other relater equipment to pred udupi district - xerox paper a4*500(75g/m2) , xerox paper a3*500(75g/m2) , xerox paper fs*500(75g/m2) , white ploid , tag large , stapler small (size 10) , medium (size 24/6-1m) , large(23/15-h 15mm(9/16) , stapler pin small (size 10) , medium (size 24/6-1m) , large(23/15-h 15mm(9/16) , ms sheet mm full scap , thick rapper bpt 11 , khaki rapper spt 11 , leave the filet , box file a4 size apt/legal apt , 100 page register , 200 page register , 500 page register , sketch pen (colours) , bullet pin , ink pad , gum bottle (small) , gum bottle (large) , steno book , scale (metal) , cora cloth , pencil wooden paper pencil-block , rubber (non dust regular eraser) , calculator (basic) , paper white acrylic/round 3 glass , square , shell small , remote shell , white board marker pen , tappal pad , single punching machine , double punching machine , scissors (paper cutting or cloth cutting , guntape (plastic transparent) , dust bin (plastic) , tissue paper-cotton-paper , cushion cotton square microfiber filled for chair sofa , scribbling pad , royal flag , cello paper soft pen , poker , antiseptic liquid , air freshener , liquid printing ink , pen drive , plastic file folder , distilled water , calling bell stainless , calling bell wireless , consignment cover-6*4 , consignment cover-9*4 , consignment cover-12*4 , consignment cover-14*8 , parcel cover (large) , rechargeable led torch light , ball point pen , refill , bucket and mug (plastic) , foot wipes , cup and saucer (ceromic white) , water jug and glass (glass/steel) , water flask , closing button file , soap (mysore sandal) 75gr , a wooden pen stand , high lighter pen , mosquito liquid 45ml , gum stick 1 to 1.5 inches , solid wood rectangular ceramic , 200 page attendance book , 200 page vehicle log book , writing pad , sanitizer liquid , hand wash , come pen , conference pad

corporations/Associations/Others

CTN :45250916

05 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of orbital welding machine with weld head & fixture block suitable for od size ranging 12-52mm , orbital welding machine with weld head & fixture block suitable for od, size ranging for 6-25mm dia