Latest welding material Tenders | Government welding material Tenders

Central Government And Public Sector

CTN :44760622

24 Apr, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

CTN :44325980

08 Apr, 2026 NA

Lohit - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of accetyline hose pipe red the hose is constructed with multiple layers. inner tube , cpem 02 electrode 3 pt 15mm , cuttogen nozzle a type cuttogen nozzles made with forged brass body a 16 comma 1 by 16 inch , cutting wheel size 105x1 pt 5 x16mm bond type resin usage oblique application heavy duty work material aluminium oxide abrasive grade diamond speed 15300 min 1 , double stage acetylene regulator with isi mark , double stage oxygen regulator , dust mask , eutectrode 2101 e 2 pt 5mm base material primarily for welding and repairing aluminum and its alloys mechanical properties tensile strength around 34 000 psi 24 kg , edp plate 6 plus 4 mm thickness of 100mm x100mm , electric tin cutter material carbon steel cutting diameter 2mm finish type bronze oxide shank type round cutting angle 1 degree , electric metel plate auxiliary cutter pt 8mm metal iron tin plate quick cutting tool attached to standard electric drill compatible drill voltage often 12 dash 21v lithium , single phase 250 amps welding machine arc 250i , ecutetic rod 242 2 pt 5 mm , lpg gas lighter , arc welding black glass 11a 1din 4 inch x 3 inch glass is made from heat resistant comma optically coated comma and darkened glass comma 3mm thick , arc welding white glass 4 inch into 3 inch as per is 818 , gloves leather lh and rh for welder , goggles , grinding wheel size 100x6x16mm bond type resin usage oblique application heavy duty work material aluminium oxide , heavy duty arc welding holder 600amp , distil water , li iron 18v 4 ah battery for cordless hand grinder oblique cutter nickel metal hydride 9 pt 6 volt 2 pt 6 ah battery , machineable cast iron electric welding electrode 3 pt 15 mm , machineable cast iron electric welding electrode 4 mm , nozzle cleaner for gas cutter torch nozzle tip cleaner with 12 wire set and flat file with ss needles , ms flat 1 inch x 4mm lenght 20 feet , oxygen and accetyline gas hose clamp 25 pt 4mm single ear or worm drive clamps , oxygen hose pipe blue the hose is constructed with multiple layers. inner tube , pop up rivets aluminum , pop rivet non slip pop up rivet gun riveter nail gun , taparia 1264 steel c clamp 205mm , welding cable with copper conductor 600 amp size 2200 oblique 0076 with isi mark , welding rod code 7018 comma 3 pt 15 mm one pkt equals to 50piece , welding rod 2 pt 5 mm one pkt euqals to 50piece , welding electrod e 6013 king bond s 2 pt 5mm approx 1pkt equals to 2 pt 750 kgs total 40 pkts , welding electrod e 6013 king bond s 3 pt 15mm approx 1pkt equals to 2 pt 750 kgs total 29 pkts , welding electrod e6013 king bond s 4mm approx 1pkt equals to 3 pt 370 kgs total 15 pkts , welding electrod expert e 7018 2 pt 5mm approx 1pkt equals to 4 pt 100 kgs total 21 pkts , welding electrod expert e 7018 3 pt 2mm approx 1pkt equals to 4 pt 100 kgs total 15 pkts , welding electrod expert e 7018 4mm approx 1pkt equals to 4 pt 100 kgs total 6 pkts , welding electrod eutectrode 680 cgs 2 pt 5 mm , welding electrod eutectrode 680 cgs 3 pt 2 mm , welding shield , zed alloy 350 3 pt 15mm approx 1pkt equals to 4 pt 100 kgs total 17 pkts , zed alloy 550 4mm approx 1pkt equals to 4 pt 100 kgs total 10 pkts

CTN :43994937

15 Apr, 2026 11.94 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools & equipmentforan international standard itot in welder tradeat iti rajkot, gujarat, india - electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester, electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60 percent duty cycle), welding transformer with all accessories (300a, ocv 60 - 100 v, 60 percent duty cycle), inverter-based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines, carriage welding system, 400 amps with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting machine capable of cutting straight & circular with all accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fin

Central Government And Public Sector

CTN :44562880

11 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of portable single operated rectifier type dc arc welding set suitable for manual arc welding process as per is 4559 (q2)

Central Government And Public Sector

CTN :44562938

11 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of portable single operated rectifier type dc arc welding set suitable for manual arc welding process as per is 4559 (q2)

Central Government And Public Sector

CTN :44755548

16 Apr, 2026 36.17 Lacs

Durg - Chhattisgarh

Tender For supply of portable single operated rectifier type dc arc welding set suitable for manual arc welding process as per is 4559 (q2)

Central Government/Public Sector

CTN :44751186

10 Apr, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of welding electrode - covered arc welding electrode - basic type (beml) (q3)

Central Government/Public Sector

CTN :44753674

24 Apr, 2026 2.58 Lacs

Sundergarh - Odisha

Tender For supply of welding electrode - covered arc welding electrode - basic type (beml) (q3) , welding electrode - air arc gouging electrode ( beml) -as per c4117 beml welding electrode (q3) , low hydrogen iron powder electrodes , bolt 5 by 8in 4in w nut , bolt 5 by 8in 3in w nut unf , bolt 5 by 8in 2 1 2in w nut , bolt 5 8in 2in w nut wsh

CTN :44721174

11 Apr, 2026 12.61 Lacs

Kamrup - Assam

Tender For supply of high mast light and misc items d d - providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires , providing and fixing of 10 meters high mast lighting tower for large area with 12 led flood light luminaires , led bulb 9w , copper chemical earthing with complete wire and materials , rubber adhesive providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires,octagonal pole construction with metal protection treatment of fabricated mast section, hot dip galvanised as per is:4759 latest, octagonal pole sheet thickness 3 mm, material of octagonal pole high tensile steel, 01 nos of longitudinal welds, type of welding is submerged arc welding process, internal distance between parallel faces at the base of pole 175, 01 no of section,internal distance between parallel faces at the top of pole 70, grades of high tensile steel ish430la as per is:5986 (grade 355), cross section of octagonal pole (no of sides) octagonal, with no door opening, width of base plate 300 mm, number of nuts for each pole 1, foundation bolt type j type en 8 grade, bolts and nuts are conforming to specication as per is:1363 - grade a, base plate material mild steel fe 410 conforming to is : 2062, necessary accessories on each pole foundation bolts,nuts, washers, instruction manuals, bolt size m24x750, thickness of base plate 16 mm, number of washer per bolt for each pole 2, number of bolts for each pole 4, foundation bolts and nuts and octagonal pole shall be galvanized as per is:4759 (latest), length of base plate 300 mm, earthing terminals on the base of the pole, for lightning and electrical protection, regional wind withstand capacity which the pole structure support is suitable to withstand (in m/s) 47, the designed life of the pole shall be 25 years, terminal box ) /bid number : gem/2026/b/7398300 * /dated: 01-04-2026 & & / bid document 1 / 15