Latest welding spares Tenders | Government welding spares Tenders

CTN :39849571

07 Apr, 2025 NA

Ramgarh - Jharkhand

Tender For fabrication and installation of nipple, suction, matching moving flange, flange disc, welding in bend for dewatering of water from mine with running pumps at karma project under kuju area

Central Government/Public Sector

CTN :39832274

15 Apr, 2025 78.43 Lacs

Talcher - Odisha

Tender For installation, alignment and commissioning of pumps with diesel engine and electric motor, laying of ms pipeline with flange welding, fabrication of tee and bends, collection of pipes, dismantling of ms pipes and other miscellaneous work in kaniha ocp

CTN :39826848

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For clean room (d block - iitm rp) - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shroude

CTN :39832256

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for clean room - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shrouded/tinned

Central Government/Public Sector

CTN :39790470

07 Apr, 2025 92.59 Lacs

Talcher - Odisha

Tender For day to day pipe line, pump shifting,installation work, flange welding, other allied works required for pumping activity related to dewatering of current quarry of ananta ocp, jagannath area for a period of one year

Central Government/Public Sector

CTN :39807259

11 Apr, 2025 78.43 Lacs

Talcher - Odisha

Tender For installation, alignment and commissioning of pumps with diesel engine and electric motor, laying of ms pipeline with flange welding, fabrication of tee and bends, collection of pipes, dismantling of ms pipes and other miscellaneous work in kaniha ocp

CTN :39810072

14 Apr, 2025 NA

Sonitpur - Assam

Tender For supply of ppr pipes and fittings - pprc pipe pp-r, sdr 7.4, od 32 , pprc pipe socket pp-r, sdr 7.4, od 32 , pprc pipe female socket reducer pp-r, sdr 7.4, od 32x25 mm , pprc pipe female socket reducer pp-r, sdr 7.4, od 32x15 mm , pprc pipe union pp-r, sdr 7.4, od 32 , pprc pipe tee pp-r, sdr 7.4, od 32 , pprc pipe elbow pp-r, sdr 7.4, od 32 , pprc pipe tank nipple pp-r, sdr 7.4, od 32 , pprc pipe ball valve pp-r, sdr 7.4, od 32 , pprc pipe end cap pp-r, sdr 7.4, od 32 , pprc pipe wall clamp od 32 mm, , pprc pipe pp-r, sdr 7.4, od 63 , pprc pipe socket pp-r, sdr 7.4, od 63 , pprc pipe reducer socket pp-r, sdr 7.4, od 63x32 mm , pprc pipe union pp-r, sdr 7.4, od 63 , pprc pipe tee pp-r, sdr 7.4, od 63 , pprc pipe elbow 90 degree pp-r, sdr 7.4, od 63 , pprc pipe reducer elbow pp-r, sdr 7.4, od 63x32 mm , pprc pipe reducer tee pp-r, sdr 7.4, od 63x25 mm , pprc pipe reducer tee pp-r, sdr 7.4, od 63x32 mm , pprc pipe ball valve pp-r, sdr 7.4, od 63 , pprc pipe end cap pp-r, sdr 7.4, od 63 , pprc pipe pp-r, sdr 7.4, od 90 , pprc pipe socket pp-r, sdr 7.4, od 90 , pprc pipe reducer socket pp-r, sdr 7.4, od 90 x 63 mm , pprc pipe tee pp-r, sdr 7.4, od 90 , pprc pipe reducer tee pp-r, sdr 7.4, od 90x63mm , pprc pipe elbow 90 degree pp-r, sdr 7.4, od 90 , pprc pipe ball valve with flange pp-r, sdr 7.4, od 90 , pprc pipe end cap pp-r, sdr 7.4, od 90 , pprc pipe pp-r, sdr 7.4, od 110 , pprc pipe socket pp-r, sdr 7.4, od 110 , pprc pipe reducer socket pp-r, sdr 7.4, od 110 x 63 mm , pprc pipe reducer socket pp-r, sdr 7.4, od 110 x 90 mm , pprc pipe tee pp-r, sdr 7.4, od 110 , pprc pipe reducer tee pp-r, sdr 7.4, od 110x63mm , pprc pipe reducer tee pp-r, sdr 7.4, od 110x90mm , pprc pipe elbow 90 degree pp-r, sdr 7.4, od 110 , pprc pipe gate valve with flange pp-r,sdr 7.4, od 110 , pprc pipe end cap pp-r, sdr 7.4, od 110 , pprc pipe o ring disc type ppr, sdr 7.4, od 110 , flange with nut and bolt lh or rh ppr, sdr 7.4, od 110 , pprc pipe pp-r, sdr 7.4, od 160 , pprc pipe socket pp-r, sdr 7.4, od 160 , pprc pipe reducer socket pp-r, sdr 7.4, od 160 x 110 mm , pprc pipe tee pp-r, sdr 7.4, od 160 , pprc pipe reducer tee pp-r, sdr 7.4, od 160x110mm , pprc pipe elbow 90 degree pp-r,sdr 7.4, od 160 , flange with nut and bolt lh or rh pp-r, sdr 7.4, od 160 , polyethylene float valve , pprc pipe welding machine of welding size 20,25,32,40,50,63 mm , pprc pipe welding machine of welding size 75, 90, 110 mm , water storage tank three layers 500 ltr

CTN :39730930

08 Apr, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of grommet metallic, brass, 7.15 mm (n0251-4119620) , grommets metalllic 7.54mm head of barrel under flange 14.06m (n0251-4119621) , nail steel round 1- 1/2" (n5315-000657) , holder electrode welding fully insulated 600 amps for normal (n0251- 4371958) , chilled iron grit fine grade g-c60 (n0283- 9233461) , gromate 11/16" metallic brass (n0251- 4119622) , gromet metallic brass; 13/64, inch of barrel under flange, 1. (n0251-4119623) , grinding wheel for angle grinder 7" (n5130-002560)

State Government

CTN :39482556

01 Apr, 2025 20.26 Lacs

Kulgam - Jammu And Kashmir

Tender For corrigendum : installation of children playing equipment/fountain at womens /children park kulgam (balance work). - (a) : civil work for (construction of fountain)earthwork in excavation by mechanical means for foundation, trencheing, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage, providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:2:4) mix including curing, carriage, but excluding form work. (circular bed), a) centering and shuttering including strutting, propping etc. complete including removal of form work.(below ground), b) centering and shuttering including strutting, propping etc. complete including removal of form work.(above ground), reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete., providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of eic., providing and laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to is 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 coarse sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of eic., (b): civil work for control panel (8x4)earthwork in excavation by manual means for foundation, trencheing, incl. getting out excavated earth and disposal of surplus excavated eath and includes dressing of sides and ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. compacting in foundation trenches and carriage includes backfilling., providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete.@50kg/cum., providing and fixing of class b medium duty g.l. pipe (100mm dia, 6mm thick) conforming to is 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the ms plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required., providing and fixing of flange plates (8x8) and 8mm thickness, including welding with gi pipes & drilling holes etc., providing and fixing of foundation bolts type "j" (m20x300)mm, including nuts and washers as required thereof. the job includes providing steel rods of appropriate size to fix bolts properly in concrete., structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by eic.qty @5kg/sft, providing and fixing of ismc:75 channel sections as per the site requirement and approved by eic. the job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by eic., providing and fixing coloured high rib corrugated g. s. sheet (18 swg) roof

CTN :39645687

02 Apr, 2025 NA

Jabalpur - Madhya Pradesh

Tender For tender for the supply of tools of various trades for govt. industrial training institutes of madhya pradesh - name of the tools, adjustable pipe chain tongue to take pipes (up to 300 mm)adjustable pipe chain tongue should be able to take pipes up size-0 to 300 mm., adjustable pipe die set bsp cover pipe size 1" or 3/4", ag 4 cutting wheels, 4 inch, ag 4 grinding wheels 4 inch, allen key alloy steel size-1.5-10 mm (set of 9), angle plate adjustable - 150 x 175 x 250 mm, anti spatter spray can size - 100 to 300 ml, anvil 24 sq. inches working area with stand, apron leather size -14 inches, arc welding cables multi cored 1 meter, arc welding cables multi cored 1 meter, arc welding plain glass, arc welding single coloured glasses, arm strong type tool bit holder. right hand, arm strong type tool bit holder. left hand, arm strong type tool bit holder. straight, aviation snips straight cut 300 mm, bearing different types each type of diameter 25 mm (min.), bearing extractor universal gear puller 2 or 3jaws adjustable, bearing puller (inside) 200 mm, bearing puller (outside) 200 mm, bench work, bench work. 2400 x 1200 x 900 mm, blow lamp brass 0.5 liter, bolts, nuts, anchor bolts, washers, screws, other pins, lugs etc, bolt & nut with washer - m 20x 2.5x 90 long, bradawl, c-clamp 200 mm, c-clamp 100mm, c.i. sluice / gate valve (flanged type), caliper hermaphrodite spring type150 mm, caliper inside spring type size-150 mm, caliper outside spring type size-150 mm spring, caps screws m6, m8, m10, m12, carbide wear block. 1 mm - 2 mm, cast iron globe valve (flanged type) 150nb, class# 150 flange: ansi125-b16.1, centre punch -10 mm and length 120 mm, chisel cold 25 mm x 200 mm, chisel cold flat 20 mm x 150 mm, chisel cold crosscut point 9 mm x 150 mm, chisel cold flat 9 mm x 100 mm, chisel cold round nose 9 mm x 100 mm, chisel firmer with wooden handle 6 mm x 200 mm, clamp set magnetic multi angle metal base (18 x10 x 10 cm), clamp toolmaker- 5 cm and 7.5 cm set of 2., combination set 300 mm, contactor & auxiliary contacts, contactor & auxiliary contacts, copper bit soldering iron. 0.25 kg, crimping tool crimp, crimping tool -16 sq mm to 95 sq mm, cut out relays-16a, 440v, de-soldering gun, universal dial test indicator - plunger type, pipe threading die with handle, divider 150 mm spring type, divider (200 mm), dowel pin (straight), drill chuck with key 12 mm., drill drift (200 mm hardened and black finish), drill hand brace (0-100 mm), drill s.s. twist block 2 mm, 5 mm and 6 mm set of 3, drill twist straight shank 3 mm to 12 mm by 0.5 mm, drill twist taper shank 8 mm to 20 mm by 0.5 mm, earth clamp (600a), electrode holder 600 amps, wire brush 3"x5" size, brass or steel, file feather edge smooth 150 mm, file flat 200 mm 2nd cut with handle, file flat 350 mm bastard with handle, file flat - second cut 250 mm with handle, file flat bastard 250 mm with handle, file flat bastard 200 mm with handle, file flat bastard. 300 mm with handle, file flat rough 150 mm with handle, file flat second cut safe edge. 300 mm with fitted wooden handle, file flat smooth 250 mm. with fitted wooden handle, file half round 200 mm 2nd cut with fitted wooden handle, file half round bastard 300 mm with fitted wooden handle, file half round bastard. 250 mm with fitted wooden handle, file half round second cut150 mm. with fitted wooden handle, file half round second cut. 250 mm with fitted wooden handle, file hand second cut. 150 mm with fitted wooden handle, file knife edge smooth 150 mm with fitted wooden handle, file rasp, half round 200 mm bastard with fitted wooden handle, file round 200 mm 2nd cut with fitted wooden handle, file round bastard. 250 mm with fitted wooden handle, file round second cut 200 mm with fitted wooden handle, file square second cut 250 mm with fitted wooden handle, file swiss type needle set of 12 , length = 150 mm, file triangular second cut. 200 mm with fitted wooden handle, file triangular smooth 200 mm with fitted wooden

Welding Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government