Tender For supply of spare parts of deep well hand pump india mar ii conforming to is 9301 1990 with latest amendment may be read along with 1st amendment is 15500 part-1 to 8 2024 with latest amendment for spares of india mark iii respectively - supplying of spare parts of drilled tube wells for india mark-ii conforming to is 15500 (relevant part 1 to 8)/2004 (with latest amendment) only from approved manufactures/suppliers from bis/unicef after proper varification of offer sheet, inspection certificate, marking & packing etc. as per bis/uniceff standard norms etc. all complete., hexagonal bolt m12x1.75 x 40mm long common to mark-ii & iii, hexagonal nut m12 x 1.75, high tensiele bolt m 10 x 1.50 x 40 mm long, nylock nut m10 x 1.50, handle axle (ss), ball bearing 6204z, chain with coupling, nitrile rubber cup washer for im-ii & iii, n. rubber sealing ring big for lower valve mark-ii, n. rubber sealing ring small for lower valve mark-ii, handle assembly (g.i), water tank assembly-ii, cylinder assemble complete set for mark-ii, upper valve assembly complete set for india mark-ii, lower valve assembly complete set for india mark-ii, upper valve guide (g.m), cylinder body with brass liner for im-ii with reducer cap for top & bottom, pump head assembly gi with front cover, bolt & third plate, 32mm gi socket, nr sealing ring im ii, connecting rod 3 mtr long with coupling and nut electro-galvanized, reducer cap for cylinder assembly im ii, check valve guide im ii gm, check valve seat im ii gm, gun metal spacer, hexagonal rod coupling m12x1.75x50mm long, gst 5%
Tender For supply of spare parts of deep well hand pump india mark ii conforming to i.s 9301-1990 with latest amendment 2004 with latest amendment for spares of india mark ii respectively under d w and s division hazaribag for the year 2024-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12 x 1.75 x 40 mm long, chain with coupling, handle assembly (gi), water tank assembly (gi), pump head assembly (gi) with front cover bolt & third plate, reducer cap for cylinder im ii, handle axle(stationless steel), nitrile rubber cup washer for im ii & iii, cylinder assembly complete set for im ii cylinder, upper valve assembly complete set im ii, lower valve assembly complete set im ii, upper valve guide im ii, cylinder body with brass liner for im ii with reducer cap for top & bottom, connecting rod, ball bearing 6204z, plunger rod for im-ii, gst @ 5% (add sgst 2.5% + cgst 2.5%)
Tender For supply of spare parts of deep well hand pumps india mark-ii conforming to is:9301-1190 with latest amendment (may be read along with 1st amendment is:15500(part 1-7) 2004 with latest amendment for spares common to both india mark-ii & iii respectively) under d.w.&s division, no-1, dhanbad for the year 2024-25. - hexagonal bolts m12 - 1.75 x 40 mm long, hexagonal nut m12-1.75 mm, high tensile bolts m10-1.50 x 40 mm, nyloc nuts m10-1.5mm, handle axle(stainless steel), chain with coupling, haexagonal rod coupling m12 -1.75 x 50 mm long, connecting rod 3 mtr. long with coupling and nut (electro galvinised), pump head assembly with front cover bolt & third plate, handle assembly (g.i.), 32 mm seamless pipe socket, upper valve assembly im-ii complete set, lower valve assembly im-ii complete set, ci reducer cap for im-ii, cylinder body with brass liner for im-ii with reducer cap top & bottom, water tank assembly i.m.-ii, ci cylinder complete set for im-ii, rubber sealing big, rubber sealing small, nitrile rubber cup(washer), gst-5%
Tender For corrigendum : burnt pvc copper wire scrap, burnt super copper wire scrap, gun metal scrap, various types of ms scrap, various types of gi scrap, various types of starter / switch scrap, hand pump cylinder body with brass liner, pvc scrap, various types of c.i. scrap, old single phase submersible pump sets, chain pulley / tool scrap, submersible pump sets of various capacity, monoblock 2 centrifugal pump sets 2 of various capacity and old wooden doors and windows.
Tender For supply of spare parts for standard deep well hand pump im ii im iii d.w. and s. division, gumla during the year 2024-25 - spare of india mark ii/iii deep well hand pump conforming to is:15500(pt-1 to 7) 2004 to be procured only from approved manufacturers or unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms., handle axle (stainless steel), chain with coupling., upper valve guide (g.m.)., check valve guide mark-ii, check valve seat for mark - ii, upper valve assembly complete set for india mark-ii, lower valve assembly complete set for india mark-ii, cylinder assembly complete set for mark-ii, pump head assembly (g.i.) with front cover, bolt & third plate, handle assembly (g.i.), cylinder body with brass liner for im-ii with reducer cap for top and bottom., plunger rod (s.s.) for mark - ii, rubber seat retainer for mark - ii, nitrile rubber cup washer for mark ii & iii, nitrile sealing ring mark ii, connecting rod 3mtr. long with coupling and nut (electrogalvanized), add gst @ 5%
Tender For supply of spare parts for repairs and maintenance to india mark ii iii deep well hand pump confirming to is 9301-1990 with latest amendment may be read along with 1st amendment to is 15500 part 1-8 2004 under d. w. s. division, saraikela for - hexagonal bolt m12 x 1.75 x 40mm long, hexagonal nut m12 x 1.75, hexagonal high tensile bolt m10 x 1.50 x 40mm long, hexagonal nyloc nut m10 x 1.50, hexagonal rod coupling m12 x 1.75 x 50mm long, upper valve assembly complete set for india mark ii, lower valve assembly complete set for india mark ii, cylinder assembly complete set for india mark ii, upper valve guide (gun mettal), head assembly (g.i. ) with front cover, bolt and third plate, connecting rod 3.00 m long with hexagonal coupling & nut (eletrogal vanished), water tank assembly mark ii (g.i.), bearing 6204z, chain with couplin, handle axle (stainless steel ), handle assembly, cylinder body with brass liner for i. m. ii with reducer cap for top & bottom, nitrile rubber cup washer for mark ii & iii, nitrile rubber sealing ring for mark ii, nitrile rubber seating big for lower valve mark ii, nitrile rubber seating small for upper valve mark ii, plunger rod, 32mm dia g.i. socket, rubber seat retainer mark ii (g. m.), add 5% gst (2.5% cgst+ 2.5% sgst)
Tender For supply of spare parts of deep well hand pumps india mark ii under d.w.s division no 2 giridih for the year 2024-25. - hexagonal bolt m12x1.75x40 mm long, hexagonal nut m12x1.75, m12 washer (2.5mm thick), handle axle (s. s), ball bearing 6204 z, chain with coupling, hexagonal bolt for front cover m12x1.75x50 mm long, nitrile rubber cup washer for im -ii, nitrile sealing ring im -ii, nitrile rubber seating big im -ii, nitrile rubber seating small im -ii, hexagonal rod coupling, pump head ass.with front cover , bolt &third plate, handle assembly, water tank assembly for im-ii, connecting rod 3.0 m long with coupling & nut, cylinder assembly complete set for im-ii, upper valve assembly complete set for im -ii, lower valve assembly complete set for im -ii, reducer cap for cylinder im -ii, spacer for handle, front cover g.i, upper valve guide, rubber seat retainer, third plate for head assembly, cylinder body with brass liner im -ii with reducer cap for top & bottom, 32 mm dia g.i socket, 5% gst
Tender For supply of spare parts for standard deep well hand pump im ii_im iii under d.w.and s. division khunti during the year 2024_25 - name of spare parts, hexagonal bolt m 12k 1.75x40 mm long common to both mk-ii & iii, hexagonal nut m12v 1.75, high tensile bolt m 10x1.5x40mm long., nylock nut m10x1.5, handle axle (stainless steel)., ball bearing 62042., spacer for handle., chanin with coupling., hexagonal rod coupling m12x1.75x50 mm long., nitrile rubber sealing ring mark-ll., nrtrile rubber seating big for lower valve mark-ii, nitrile rubber seating small for upper valve mark-ii, pump head assembly (gi) with front cover, bolt & third plate., front cover (g.l)., handle assembly (gi)., water tank assembly for mark-il (g.l),, connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ll., upper valve assembly complete set for im-ii, lower valve assembly complete set for im-ii, plunger rod (ss) for mark-li, upper valve guide (gm)., third plate for head assembly (gi), cylinder body with brass liner for im-ii with reducer cap for top & bottom., add. 18% gst rs.
Tender For supply of spare parts of deep well hand pumps india mark-ii and iii under d.w.s division, no. 02, dumka for the year 2024-25. - name of materials, hexagonal bolt m12x1.75x40mm long common to mark ii & iii, hexagonal nut m12x1.75mm., washer m12 (2.5mm thick), high tensile bolt m10x1.5x40mm long, nyloc nut m10x1.5mm, handle axle (stainless steel), washer for handle axle (4mm thick), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal bolt for from cover m12x1.75 mmx20mm long, nitrile rubber cup washer for mark - ii & iii, nitrile sealing ring mark - ii, nitrile rubber seating big for upper valve mark-ii, hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i) with front cover, bolt & third plate, handle assembly (g.i), (a) water tank assembly for mark - ii (g.i), connecting rod 3mtr. long with coupling and nut (electro-galvanized), (a) cylinder assembly complete set for mark-ii, (a) upper valve assembly complete set for india mark-ii, (a) lower valve assembly complete set for india mark-ii, reducer cap for cylinder mark-ii, (a) plunger rod (s.s.) for mark-ii, upper valve guide (g.m.), rubber seat retainer for mark-ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom, gun metal spacer, check valve guide mark-ii, (a) check valve seat for mark-ii, 32mm. dia. g.i. seamless pipe socket, add 5% gst