Latest window frame sale Tenders | Government window frame sale Tenders

State Government

CTN :44959654

30 Apr, 2026 1.00 Crore

Jaisalmer - Rajasthan

Tender For close graded gsb material as pert table\400.a , aggregates 45 mm to 2.8mm , , aggregates 6 mm nominal size , , stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. , , cost of water , , ghadla kankar/jhajhra , , mud masala , , lime from bud kiln for lime masonry work , , cement , , ppc , , white cement , , fine aggregate , , sand gravel , , gravel - local , , rakhi (fly ash) , , surkhi , , stone dust (in masonry) , , ballast stone/brick (for other than road work) , , cut 40mm measuring stone wads (hand-broken grit 1/11) , , 40mm stone brittle (crushed) (cut voids 1/11) , , 20mm stone brittle (crushed) , , 12/10/6mm stone prints (crushed) , , brick mortar , , material for road work (5 km (including lead)) , , 63-40 mm crusher broken stone crushed (cut voids 1/11) , , 63-40 mm hand-broken stone aggregate (cut voids 1/11) , , 90-45 mm hand-broken stone aggregate (cut voids 1/11) , , quarry rubbish (cut the voids 1/6) , , gravel (voids cut 1/6) , , conker (cut voids 1/6) , , binding material (im 4-6) (cut voids 1/6) , , it (22.5 x 11 x 7.50 cm) , , first class , , ii class , , soling / khareja / masonry stone , , chinai beradda (rr) , , masonry rubble (cr) , , kharanja soling (for floor work up to 15cm height) , , kharanja soling (23cm height for road kharanja work) , , jodhpuri type stone slabs/bows/slabs (length 2-3", width 10-12", thickness 2.5-3.5") , , flaky material (3-4" thick & length and width 1-2") , , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , , up to 25mm thickness , , up to 25-40mm thickness , , up to 40-50mm thickness , , up to 50-75mm thickness , , up to 75-100mm thickness , , up to 100-150mm thickness , , flooring / patti patan katla stone , , floor slabs upto 35mm thick, min. 3 sqft or more area , , katla for patti patan 60-75mm thickness, min. 3 sqft or more area , , unpolished rough kota stone , , up to 900 sq cm , , up to 300 sq cm , , more than 2300 sq cm , , marchat chips , , martha powder , , marbat stone (rajnagar quality local 20 thick) , , 401 to 2000 sq cm , , up to 900 sq cm , , more than 2300 sq cm , , paler frame , , ekat paitam size 100 x 15 mm. , , paitam size 125 x 75 , , stone slabs , , upto 1.5 mg , , 1.5 to 2.40 m length , , 24m 10.30 m lagrick , , above 3.0 m length, mick , , precast tiles/makes , , glared size 300045 cm , , mosaic site-40thick , , virified size-60 , , interlock tie brick/block for road work , , cenost interlocking block m-30grade, 6 thick , , consent intarlocking block m-3lgrade, thick , , consent itarlocking block m-30grade, 100thick , , isi marked of frp insulated copper conductor compatible core , , 1.50 mm , , 1.00 pm , , local wood may fittingsha (for door and window furniture) , , factory made crackers (30 thick solid core single leaves) , , iron (tor rahit 1415500 rest , , widening vapor 18 gauge , , iron guard , , konia lohachoker saria leafy apple , , barbed iron wire (sine 12 gauge wire and 12 gange strad/12 guage wine and 14 gauge strad 14 ago , , iron species (24 or 14 pieces) , , cement concrete lattice sky patal 40mm thick , , 3mm thick glass , , complexion belly , , award winning paint , , disstep (water bound) , , for roasting (aras/kali) , , primer for iron rods , , gi sheet, mm thick , , g.i. sheet 22 gauge 0.80 m.m.) , , rustus cement mother 6m(2.5/2.75x1m) , , other posts , , pvc sheet thick (plain colour) , , green yellow literoof expo baddar (183090) , , pipe , , gi 15 mm diameter class) , , g.i. 20mm diameter b class) , , gi 25 mm diameter class) , , ac 19 mm diameter , , ac 100mm diameter , , pvc 90 mm diameter (including ring) , , pvc 110 mm diameter (including ring) , , pvc 140 mm diameter (including ring) , , p.c. 110 mm (2.5 kg/s) with coupler , , indian w.c. , , orrisa w.c. , , european w.c , , foot re , , the urinal was 430*350*300mm in size. waste pipe , , stone screw pipe 100mm. m samba , , cp pitar kaal (a 15 mm) (s mark , , p dib kak155 mak , , 125 mm diameter pipe , , aarti is our pipe and we are

Central Government/Public Sector

CTN :44728937

29 Apr, 2026 39.00 Lacs

Kamrup - Assam

Tender For corrigendum : repair replacement of roof sheet, joinery, plaster of parapet, sunken slab, steel window ventilator, gi tubing, pvc water tank, glass panes, wire mesh and other allied work at depot/ adm area of 222 abod in the aor of age b/r i under ge narangi

Central Government / Public Sector

CTN :44964499

01 May, 2026 NA

Tirupati - Andhra Pradesh

Tender For auction sale of rolling stock - 07 coaches--lot no 5626045001 at crs/tpty scrap depot, ap [andhra pradesh] available with cdms/sd/crs/tpty scrap depot. description: cond. &u/s 8 wheeler bg coaches without bogie complete, wheel sets & rc items. coach nos (1)sc wgscn 057268 (2)sc wgscn 037222 (3)sc gs 037409 (4)sc ra 011213 (5)sc wgscn 057301 (6)sc wgaccn 047102 (7)sc wgscn 057291 make:icf/rcf. net saleable qty :171.70511mts; approx. weight of ms: 156.01366mts; approx. weight of rexine, foam, pvc, compregsheets, limpet sheet:5.55mts; approx. weight of ss lavatory pans:0.21mts; approx. weight of ss auxiliary water tanks:0.08mts; approx. weight of uic rubber:0.81mts; approx. weight of aluminum:0.1mts; approx. weight of aluminum hat racks:0.0116mts ; approx. weight of aluminium chequered sheets:0.644mts; approx. weight of al. hydraulic doors:0.03mts; approx. weight of al. ac roof vents:0.03008mts; approx. weight of al. beadings:0.05mts; approx. weight of al. roof:0.35mts; approx. weight of ss panels :0.441mts; approx. weight of pvc copper cables:0.261mts; approx. weight of ss truff floor:4mts; approx. weight of ss biotanks:0.99mts; approx. weight of ss under slung tanks:0.55mts; approx. weight of ss:0.08547mts; approx. weight of al. shutter frames and sill plates:0.359mts; approx. weight of rubber, woods, wooden seats with back rest, fibre shutters, window glasses:0.6225mts; electrical items: approx. weight of copper:0.3758mts; approx. weight of aluminium:0.141 mts; note:-(1) cutting is permitted to loadable sizes.(2)rc items mentioned in the excluded/reclaimed items list to be returned to railways. the quantity of rc items mentioned below will be arrived as per the joint handing over memo issued by the railway authorities to the successful bidder at the time of cutting/handing over of the lot and the same list of rc items should be returned to railways by the purchaser.(3)railways does not guarantee for quality, quantity, description, etc. purchasers are advised to physically inspect the lot and satisfy themselves before bidding as no communication/ complaints will be entertained under any circumstances regarding shortage of material. (4)any non-ferrous items, electrical items, rc items found in excess to the list mentioned below & not appearing in the list of saleable items to be returned to railways.(5)successful bidders must ensure the rc items at the time of taking over and same should be returned to custodian before effecting delivery. in case if item cannot be seen/count/weigh before dismantling, then the same will be jointly inspected soon after dismantling for inclusion in joint collection list of rc items.(6) the purchaser is responsible for providing adequate safety firefighting equipment such as fire extinguishers etc., on the spot at the time of cutting and delivery. (7)free delivery period (fdp) for the lot is 60 days. (8)in addition to the above, purchasers must comply with the special conditions mentioned below. location: line no.01 of old cutting yard/crs/tirupati. delivery on number basis only. total qty 07 numbers.pl no 98111048(01) hsn code:72042990. gst @18% on forward charge basis.

Central Government And Public Sector

CTN :44962819

06 May, 2026 4.23 Lacs

Muzaffarpur - Bihar

Tender For boq for the work of repair to exposed ms bars in ceiling, damaged wall plaster,doors and window repair/replaced, pvc door in toilet, app water proofing on terrace of one side t-ii qrtr in te campus at hajipur

CTN :44964527

30 Apr, 2026 NA

Kharagpur - West Bengal

Tender For auction sale of others - 12 nos of uncerviceable abandoned masonry structure railway service building-different type of service building as follows- [1] gang hut at kso km 130-11-13-01 nos,[2] store room at kso km 130-07-09-01 nos,[3] repeter room at sua km 138-3a-5a-01 nos,[4] ladies and gents bathroom on pf no1-2 at sua km 138-7-9-01 nos,[5] station building at sua-01 nos [excluding 05 nos of fan and ms grating covers over drain-24 nos] [6] waiting hall at sua-01 nos, [excluding 05 nos of fan and ms grating covers over drain-24 nos] [7] ibh room at bnb km 146-1-3-01 nos,[8] store room at jgm km 153-17-19-01 nos [9] south side pump house at jgm-01 nos[excluding gantry post rail-52kg and other pipe line fitting],[10] north side pump house at jgm-01 nos,[11] gang hut at gii-katb[at lc-88] km 164-13-15-01 nos, [12] gang hut at jgm-katb[at lc-85] km 157-21-23-01 nos. [i] no of bricks-101702.5 nos,[ii] gi sheet-543.84 kgs[iii] ac sheet-3149.72 kgs [iv] structural steel-12572.11kgs,[v] rcc reinforcement-2259.28kgs,[vi] iron door ,iron window,grill -785.7kgs [vii] wooden door-1150 kgs,[vii] wooden window- 300 kgs,[ix]pvc door-20 kgs,[x] stone masonary-39522 kg.total ferrous � 16.160 mt,

CTN :44964528

30 Apr, 2026 NA

Kharagpur - West Bengal

Tender For auction sale of others - scrap abandoned masonry structure railway quarters: total 16 unit- 08 block, type i as follows. [1] qtr. no. lr/10, type-ii, total units-2, [2] qtr. no j/11, type-ii, total units-2, [3] qtr. no- k/12, type-ii, total units-2, [4] qtr. no-m/7, type-ii, total units-2, [5] qtr. no- m/8, type-ii, total units-2, [6] qtr. no- m/14, type-ii, total units-2, [7] qtr. no- l/3, type-ii, total units-2, [8] qtr. no- m/11, type-ii, total units-2. [i] no of bricks-71768 nos,[ii] rcc-349.4035 kgs.[iii] latrin & bathroom pvc-384 kgs.[iv]wooden door-3120kgs,[v] wooden window-2160 kgs.[vi]wooden rafter-877.175kgs,[vii] ac sheet-12602.37 kgs ,[viii]cgi sheet-122.5 kgs,[ix] steel-4229.96kgs [x]iron door-720kgs,[xi] iron grill gate with ms angle- 310.17 kgs,[xii] ng rail-496kgs,[xiii]stone mansory-734730.066 kgs total ferrous � 6.105 mt,wood- 6.157 mt,bricks-71768 nos, pvc-0.384 mt

CTN :44964529

30 Apr, 2026 NA

Kharagpur - West Bengal

Tender For auction sale of others - scrap abandoned masonry structure railway quarters: total 48 unit in 02 block as follows. [1] qtr. no-1/os/50, type-i, total units-24, [2] qtr. no-1/os/53, type-i, type-i, total units-24, [i] no of bricks-229082 nos,[ii] rcc works-26933 kgs[iii] ms angle-949.964 kgs [iv] ms rod-71.12 kgs,[v] iron door (02 nos)-80 kgs,[vi] celling fan pipe-210 kg [vii] gi water pipe-832kgs [viii] wooden doors (16 nos)- 1886 kgs,[ix] wooden window (33 nos)- 2049 kgs,[x] pvc door(03 nos) -10 kgs,[xi] ps water tank (12nos)-400 kgs[xii]pvc rain water pipe-162kgs. total ferrous � 29.076mt,wood-3.935 mt,pvc-0.572 mt,bricks-229082 nos.

CTN :44721019

25 Apr, 2026 83.82 Lacs

Papumpare - Arunachal Pradesh

Tender For corrigendum : supply of wooden batten , resin bonded rock wool 50 mm thick , 6mm pre laminated board grade i , laminated particle board 19mm thick , gi wire mesh 20 swg , 19mm water proof ply board , vinyl flooring , fevicol , nails mixed , screw 3 to 6 inch with washer , laminated wooden flooring 8mm thick , upvc door and window dgu with fittings , golden led tube light retrofit type 20 watts , modular socket 6 amp of approved quality , modular socket 16 amp of approved quality , modular switch 6 amp of approved quality , switch 16 amp of approved quality , pvc wire 1.5mm of approved quality , pvc wire 2.5mm of approved quality , conduit pipe casing caping 1inch of approved quality , switch board 75mm 75mm 50mm , upvc window sliding two track size 4 ft 4ft , 15mm cp braass bib cock , 15mm cp brass angle valve , 2 in 1 cp brass bib cock 15mm , cement 50 kg opc 43 grade , 300 300 mm anti skid ceramic floor tiles , wooden primer , wooden paint white , sliding upvc window 3 track size 4 3ft , 35mm thick decorative flush door ) /bid number : gem/2026/b/7406019 * /dated: 31-03-2026 & & / bid document 1 / 28

State Government

CTN :44944164

29 Apr, 2026 NA

Ranchi - Jharkhand

Tender For partner empanelment & supply of manufacturing consumables - 3d printer filament, 1.75 mm thick pla filament( 1 spool), acrylic pvc solid pipes, ø26, acrylic pvc solid pipes, ø40, aluminium plate, size- 100 x 20 mm, aluminium plate, size- 60 x 60 mm, aluminium rod, ø26, aluminium rod, ø40, bo motor, 60 rpm, (single shaft) straight, sharp buzzer, works on 3 to 27 volts dc (big), capacitor, 1000uf, capacitor, 0.1uf, carbide insert, tcmx 160404en, tcmx 160408en, tcmx 160412en, carbon brush, ag 4, chop saw cutting wheel, thickness-3mm, wheel bore-25.4 ,wheel, dia-355mm, cutting wheel, wheel bore-16mm , wheel dia-105 ,wheel, thickness-1.2mm, dust mask / welding respirator, disposable foam ear plugs, one size fit for all ears, made of non, irritant and allergy free material, available with nylon or cotton cord., earthing holder, 200 amp, electrode holder, capacity- 200 amp, emery sheet, grit 180 - 500, emery sheet, grit 600 - 800, gear oil, servo premium cf-4 15w-40, grinding wheel ,wheel bore-16mm wheel dia-105, wheel, thickness-1.2mm, grinding wheel dresser (diamond 1 carat), grinding wheel 4'', make- bosch/taparia or equivalent, grinding wheel 5'', make- bosch/taparia or equivalent, grinding wheel 7", make- bosch/taparia or equivalent, circular saw blade(cutting wheel) for steel cutting (4") , make-, jk/ bosch/taparia, circular saw blade(cutting wheel) for steel cutting (5") , make-, jk/ bosch/taparia, circular saw blade(cutting wheel) for steel cutting (7") , make-, jk/ bosch/taparia, tungsten rod length 150 mm , thickness 2.4mm, hacksaw blade, size- 300 × 12.5 × 0.6 mm 14tpi (bimetal), hacksaw blade, size- 300 × 25 × 0.6 mm 14tpi (bimetal), hand gloves pair (rubber coated cotton gloves) / esd gloves, (electric static devices), hss tool bit, 14 mm, i.r transmitter bc547, ic 555, ic 7805, leather welding apron, apron with strap and buckle, masking tape (24mm *20m), co2 gas cylinder for mig welding, capacity- 30 kg, ms flat, 50 x 5 mm, ms flat, 50 x 10 mm, ms rod, ø28, ms rod, ø40, ms square (solid), 12x12 mm, oil stone (rough/smooth), paint brush, 0 size, plastic sample collector, 100 ml, plastic zip lock pouch, 6 inch × 4 inch, power saw blade, 14" × 1¼" × 16" (bimetal), resistor, 47 kω, resistor, 4.7 kω, resistor, 500ω, resistor, 220 ω, safety goggles (transparent), safety glasses with side shields,, material-polycarbonate hard-coated lens for scratch resistance,, make- 3m / karam / dupont / udyogi or equivalent, safety helmet, rachet type with plastic cradle, make - karam/dupont/3m/udyogi or equivalent, sanding wheel (emery), wheel bore-16mm wheel dia-125 wheel, thickness-1.2mm, ir sensor , photodiode reciver, single strand wire, red, single strand wire, black, soldering wire, lead (oswal) 60 : 40 (50 gm), surface grinding wheel , outer dia: ø200, bore dia: 30 mm, switch, tap, m 6, tap,m 8, tap, m 12, transformer, 6-0-6/500ma, transistor, c1383, triangle file, 150 mm (medium), tungsten electrodes thoriated tungsten, wt20 2.0 mm x 150, mm, u-channel, 100x10 mm, v-belt, b780 / b29, v-belt, b 26 / b703, vero board, 140 mm × 90 mm, vertical milling cutter insert, sdmt 120412pdrmh, voltage regulator, 7805, anti rust spray, wd 40, capacity- 400ml or more, welding electrode, 350 mm x 1.6 mm, welding helmet, full face covering with minimum protective, shade no. 8 or 10, welding helmet, equipped with a flip up front window that the user can choose to, open when not performing an operation.has removable lens, which is tested against en 175 and en 169.the head band of, welding helmet has 4 adjustment positions and is provided with, an anti-sweat comfort pad for increased comfort. consists of, ratchetadjustment for easy harness adjustment., material-high impact resistant polycarbonate for increased, protection; material of shell: polypropylene impact resistant shell, that can be adjusted and tested for electrical insulation., size of window 100mm x 75mm, operating range-50 0c to+800c and tested for electrical, insulation., certified to

CTN :44778682

01 May, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of tiles non skid 2 x 2 ft , cement , sand bag , flash tank , bib tab , stop cock pvc , ppr pipe 25mm , ppr tee , ppr elbow , ppr female socket 20x15 , ppr reducer , ppr union , wash basin outer pipe , ppr 20mm elbow , interlocking tiles , og paint , aluminium window , cgi sheet 3 x 10 ft , self screw , false celling panel 2 feet x 2 feet , plywood 4x8 , door handle , window glass , door , wash basin , commode , hescon bastion , mirror , steel hanger , slinding bolt , steel cock water tap , tirpal 30x30 , paint black , paint white , window glass 4x4 ft 4mm , paint red , paint yellow , paint olive green , curtain rod 6 feet , pvc pipe water 1 , flush tank cock , exhaust fan , bty 12 v and 180ah

Window Frame Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

State Government