Latest wire gauze Tenders | Government wire gauze Tenders

Corporations/Associations/Others

CTN :43050100

12 Dec, 2025 1.39 Crore

Ichalkaranji - Maharashtra

Tender For providing supplying submersible pump, and allied material for newly 100 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 sw

Corporations/Associations/Others

CTN :43050103

12 Dec, 2025 1.49 Crore

Ichalkaranji - Maharashtra

Tender For 2 .providing supplying submersible pump, and allied material for newly 107 drilled boarwells in ichalkaranji municipal corporation- providing, crecting and giving test of mjf approved submersible pump set 150 mm din, 3 h.p. of conforming to is, 3034 and moter conforming to 15 9283 with waterproof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v+ 10%, 3 ph. 50 hz a.c. supply, with cable guard, thrust carben/fibre bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge outlet as per manufacturer's design. anti-thrust stream lined non-retum valve shall be provide with pump. 3 m submersible copper conductor cable in single/double run and 2 pairs of suitable size, crection clamo 10 mm thick shall he acided with man. test submersible pump set 100 men dia (with polypropylene/noryl impeller) up to 20 stagos 3.0 hp, submersible pump 150 mm dia (with bronze/stainless steel (cf8m) impeller) up to 8 stages, (mjp e/m csr 2023-34 pm 1-1-4, pm1-3-3, p-182), supplying and erecting isi mark gl pipe 50 mm dia. b' class ar position with accessories complete. specification no. cw-plb/gp., (pwd electrical csr 2023-24, 16-5-6, 21, supplying, crecting, testing and commissioning of flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with coluran pipe assembly complete., (pwd electrical csr 2023-24, 12-4-8), supplying & erecting bore plate, clamps, nurbolts, (market rate), supplying and erecting "b' class gi coupling nipple of 50 mm dia. in position with necessary material., (mup e/m csr 23-24, pw 3-4, pg-08), supplying and crecting 'b' class gf tee of 50 mm dia. in position with necessary material., (mup em csr 23-24 pw 5-3, p-08), supplying and crecting rolled steel jnist (ginfer) pole 125 * 70 mm (13.3kp / m) with base plate in provided foundation as per specification no. oh-plrsi, pwd dsr 2023-24, moking cement conerese foundation including excavation (45 * 45 * 120) * cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal. (45 * 45 * 45) * cm / 45 * cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete (for 6m pole), pwd dsr 2023-24 item no 16-3-2, supplying, crecting, testing & commisioning gl sheet 0.6 mm (24 swg) having zine conting of 275 microns with gaivarization process compliance to is 2629:1985 to be used for fabrication of boses panel boants etc. including cutting. bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel peint as per specification no. cp/sh/cr, 12^ * in\$0^ * 0.15 = 0.15, 2 12^ * 0.150^ * 0.3 - 0.09, 312^ * 0.150^ * 0.5 - 0.15, 1.09 sqm, pwd dsr 2023-2416-1-2, supplying, erecting, testing & commisioning plywood 6 mm thick fixed to wall. or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. cp/sh/cr, pwd dsr 2023-2416-1-2, supplying, installing and testing pipe type carthing with 40mm, dia. g.l. pipe or 20 mm dia. g.i. rod complete with all accessories of gl materials & recording the results as per specification no. eα-ερ, pwd dsr 2023-2416-1-11, supplying, erecting, testing and commissioning of automatic control panel for three phase, 415 v, a.c. supply, submersible/centrifugal pump set upto 7.5 hp consisting of d.o.l.. starter having relay range 9-14 a, s.p.p., combined ammeter/voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip54 protection with single phasing, phase reversal, phase imbalance, etc., pwd dsr 2023-24 12-4-17, supplying and erecting mains with wp 2 x 6 sq. mm. 1.ikv. grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16

State Government

CTN :43069809

17 Dec, 2025 NA

Pantnagar - Uttarakhand

Tender For provide & fixing of fly proof wire gauze for window of smart class room & computer lab in civil engg. deptt. at old pct

Central Government/Public Sector

CTN :43000647

29 Dec, 2025 NA

Cuddapah - Andhra Pradesh

Tender For supply of ammonia compressor spares> - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50 ), ferrule (pa

State Government

CTN :42990982

13 Dec, 2025 455

Kolar - Karnataka

Tender For procurement of chemicals, glass wares and lab equipments to pg center mangasandra and university college of education chikkaballapura - glass beaker 500ml, glass beaker 250ml, glass beaker 100ml, china dish, single holed cork for beakers, double holed corks for beaker, corks for beakers, corks for test tubes, thermometer 0 to 110â°c, tongs for beaker, tongs for crucible, tongs for test tube, motor and pestle, evaporating dish, porcelain crucible, clamp stand, wire gauze, burette with stand-50ml, pipette, boiling tubes, watch glass, dropper, funnel glass, funnel plastic, measuring cylinder glass 250ml, measuring cylinder glass 100ml, conical flask 100ml, glass beaker 1000ml, acetone 500ml, glucose 500gm, methyl orange 125ml, phenolphthalein indicator solution 125ml, litmus paper red or blue, sodium sulphate 500, barium chloride 500gm, silver chlloride 25gm, iron filings 500gm, copper powder 100gm, zinc granules 100gm, magnesium ribbon 10gm, silver nitrate 25gm, potassium iodide 25gm, sodium bicarbonate 500gm, sodium carbonate 500gm, ferrous sulphate 500gm, zinc sulphat 500gm, copper sulphate 500gm, sodium chloride 500gm, sodium hydroxide 500gm, acetic acid glacial 500ml, dilute nitric acid 500ml, dilute sulphuric acid 500ml, dilute hydrochloric acid 500ml, scalples, forceps, droppers, cover slip, glass slides, eosin 100ml, methylene blue 125l, safranin 125ml, acetocarmine 100ml, sudan iii or iv 25gm, biuret reagent 100ml, benedicts solution 500ml, sodium hydrogen carbonat 500gm, iodine 100ml, ethanol 500 ml, ammonium hydroxide 500 ml, tripod stands, spirit lamp1, glass rods, flask conical 250ml

Central Government/Public Sector

CTN :42965972

12 Dec, 2025 NA

Golaghat - Assam

Tender For supply of gate, globe and check valves - iii - 8 in dual plate check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, -, -, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 8 in dual plate check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, -, -, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 8 in dual plate check valve flanged ends, -, api 594, astm a216 gr.wcb epoxy lined, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, -, -, -, -, -, -, -, seats: -, bronze, -, -, -, -, -, -,, 3 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 4 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 6 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 3 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, ff, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, bronze, -, -, -, -, -, -,, 2 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 3 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 4 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 6 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 2 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb, 300 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 5, -, -, -, -, -, -,, 2 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour service, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 9, -, -, -, -, -, caustic service, 3 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour service, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 9, -, -, -, -, -, caustic service, 4 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour service, 150 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 9, -, -, -, -, -, caustic service, 2 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour service, 300 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 9, -, -, -, -, -, caustic service, 3 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour service, 300 lbs, installation: horizontal or vertical, rf, ends as per asme b16.5, -, bolted cover, -, -, -, -, -, seats: -, api trim no 9, -, -, -, -, -, caustic service, 6 in swing check valve flanged ends, -, api 594, astm a216 gr.wcb + pwht + sour ser

CTN :42952990

19 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of allum. alloy plate size 5000x1250x6mm - n9535- p032069 , allum. alloy plate size 5000x1250x5mm - n9535-p032068 , alu. bronze bar rd solution heat dia 125mm - n9530-000148 , bar rd alluminium bronze 31.5mm dia - n9530-000142

Central Government And Public Sector

CTN :42846776

11 Dec, 2025 NA

Chittorgarh - Rajasthan

Tender For tender for supply of carbon steel gate valve size 2 inch : : -carbon steel gate valve , size -2 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing , stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end-flange end. , carbon steel gate valve , size -4 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end -flange end. , carbon steel gate valve , size -6 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end-flange end. , carbon steel gate valve , size -8 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end-flange end. , carbon steel gate valve , size -10 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end-flange end. , carbon steel gate valve , size -12 inch , as per standard-awwa c-509 pressure rating-class-150 valve body and bonnet-astm a 216 gr.wcb wedge-wcb + stellite facing seat ring-aisi ss 410 + stellite facing stem-aisi ss 410 gasket-ss-304 + grafoil filler spiral wound gland packing-grafoil packing operation-hand wheel end-flange end. , carbon steel rubber seated butterfly valve , size -12 inch , as per standard-awwa c-504 pressure rating-class-150 valve internal hardware-stainless steel type-304 valve external hardware-high tensile steel design pressure-10 bar seat test pressure-10 bar with water , body test pressure-20 bar with water , direction of hand wheel rotation-clockwise to close working fluid-water end connection-flanged flange drill-as per awwa c-207 body-cast carbon steel(astm a216 gr wcb) disc-cast carbon steel(astm a216 gr wcb) drive shaft-stainless steel bearing bush-bronze backed ptfe stub shaft-stainless steel o-rings and valve seal-nitrile rubber (shore hardness 70-75a) shaft pin-stainless steel end cover plate and gland plate-stainless steel gear box-valve manufacturer to decide. , carbon steel rubber seated butterfly valve , size -20 inch , as per standard-awwa c-504 pressure rating-class-150 valve internal hardware-stainless steel type-304 valve external hardware-high tensile steel design pressure-10 bar seat test pressure-10 bar with water , body test pressure-20 bar with water , direction of hand wheel rotation-clockwise to close working fluid-water end connection-flanged flange drill-as per awwa c-207 body-cast carbon steel(astm a216 gr wcb) disc-cast carbon steel(astm a216 gr wcb) drive shaft-stainless steel bearing bush-bronze backed ptfe stub shaft-stainless steel o-rings and valve seal-nitrile rubber (shore hardness 70-75a) shaft pin-stainless steel end cover plate and gland plate-stainless steel gear box-valve manufacturer to decide. , carbon steel wafer type double disk check valve , size -12 inch , as per standard-awwa c-518 pressure rating-class-150 body-astm a357-cf8m disk-astm a240 316/astm-a240 304 cap-astm a240 316/astm-a240 304 spring-astm a240 316/astm-a240 304 rubber seat-epdm , carbon steel gate valve , size -2 inch , as per design-api 600 pressure rating-class-150 valve body and bonnet-astm a 216 gr.

Wire Gauze Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Corporations/Associations/Others

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector