Latest wood block Tenders | Government wood block Tenders

Central Government/Public Sector

CTN :38568342

11 Jan, 2025 NA

Ahmedabad - Gujarat

Tender For supply of wooden block of sal wood size of 2750x250x130 mm(2750 mm lomg,250mm width & 130mm depth. ]

Central Government/Public Sector

CTN :38604444

30 Dec, 2024 NA

Salem - Tamil Nadu

Tender For single seater wooden sofa material: mahacony wood, total number of seats in the sofa set 1, size: 27d x 29w x 36h inch, style: antique, traditional (as per photo attached), frame covering : ful ly upholstered (colour variable), sofa set is foldable to use as bed: no, backrest cushion material: foam, d ensity of cushion of backrest material: 32, density moulded foam covering material for seat and backrest : suede fabric 35mm, frame structure material and size (plus or miuns 1 mm): any other wood of min 1.5 in ch thickness, seat cushion material : polyurethane moulded foam, type of spring in the base / seating : no , colour : teak finish matte, polish : sheenlac polish & melamine matt (sheenlac material only), warranty p eriod : 5 years, service centre : service centre should be available at any of location over salem division jur isdiction, supply: mettupalayam, podanur jn, coimbatore north, coonoor, ooty. 1 sample to be supplied at consignee office before full supply. detailed specification and photo is attached as annexure. [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :38604445

30 Dec, 2024 NA

Salem - Tamil Nadu

Tender For wooden sofa set (3+1+1) material: mahacony wood, total number of seats in the sofa set : 5, number of single seater units (nos):2, number of three seater units (nos):1, size : 27dx 70wx36h inch (three seater), style : antique, traditional, frame covering : fully upholstered (colour variable-final colour will be selected by consignee after issuance of p.o), sofa set is foldable to use as bed :no, backrest cushio n material : foam, density of cushion of backrest material: 32 density moulded foam, covering material for seat and backrest : suede fabric 35mm, frame structure material and size (plus or minus 1 mm): any othe r wood of min 1.5 inch thickness, seat cushion material: polyurethane moulded foam, type of spring in the base / seating: no, colour : teak finish matte, polish: sheenlac polish & melamine matt (sheenlac material only), warranty period : king size mat: 5 years, supply : mettupalayam, podanur jn, coimbatore north, coo noor. 1 sample to be supplied at consignee office before full supply. service centre: service centre should be available at any of location over salem division jurisdiction. detailed specification and photo is attached as annexure. [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :38569572

01 Jan, 2025 NA

Delhi - Delhi

Tender For manufacture & supply of trestle for lhb coaches as per drawing no-w.r/ml-352/c manuf actured by msc class heavy duty erw pipe confirms to is: 1239-04 part 1, 2)-32mm thick msplate propo sed for top plate confirms to is 2062-99, 3)-for rib andbase plate ms plate 10mm thick proposed and confirms to is 2062-99, 4) solid wooden block size 390*390mm(drawing attached).painted structure o f trestle body and two additional (1 with trestle & 2 extra = total 3) wooden blocks to be provided with each trestl e. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

CTN :38571924

27 Dec, 2024 NA

Dehradun - Uttarakhand

Tender For procurement (supply and installation) of yogasana, mallakhamb, volleyball and golf equipment for 38th national games, uttarakhand - yogasana, fop for artistic yogasana pair/ rhythmic yogasana pair & artistic yogasana group 11x11 m (with demarcation of 8x8 and 10x10 m)a. base layer = wooden interlocking blocks. 121 pcs of size 1x1 m. the surface of wooden blocks is plain. it consists of 3 ply wood fastened together. each ply wood of approx. 18 to 20 mm. the base ply is fitted with hard form block of approx. 2 so as to provide height from the floor. the wooden structure is aided by form slope so as to provide a sudden sharp edge cut. with this foam slope. the foam slopes are of 2 fts long. it consists of cut in the form for interlocking with the wooden sheets/ structure.b. middle layer = interlocking mats of 121 nos. ofi. size= 1m * 1mii. density = 140 150 kg/cubic mtriii. hardness= 40 45 degree shore a.iv. thickness = 25- 30 mm.v. raw material = reva- r or virgin/pure eva (with atleast 18 % grade). c. top layer = vinyl mat cover of following specifications asi. material = heavy duty vinyl non abrasive and non tearing cover.ii. 550 gsm anti skid layer.iii. size 11.5m x 11.5m.iv. the vinly cover of 11.5m*11.5m will have square demarcation of 8*8m with orange color and 10*10m square demarcation with green color and rest remaining area with red color. the vinyl sheet should consist of 5 to 6 each metal grommets for fastening for all 4 edges., elevation 1.5 feet including fop, practice arena/ warm up arena for athletes 5x5m (with demarcation of 4x4 m)a. base layer = wooden interlocking blocks. 25 pcs of size 1x1 m. the surface of wooden blocks is plain. it consists of 3 ply wood fastened together. each ply wood of approx. 18 to 20 mm. the base ply is fitted with hard form block of approx. 2 so as to provide height from the floor. the wooden structure is aided by form slope so as to provide a sudden sharp edge cut. with this foam slope. the foam slopes are of 2 fts long. it consists of cut in the form for interlocking with the wooden sheets/ structure.b. middle layer = interlocking mats of 25 nos. ofi. size= 1m * 1mii. density = 140 150 kg/cubic mtriii. hardness= 40 45 degree shore a.iv. thickness = 25- 30 mm.v. raw material = reva- r or virgin/pure eva (with atleast 18 % grade). c. top layer = vinyl mat cover of following specifications asi. material = heavy duty vinyl non abrasive and non tearing cover.ii. 550 gsm anti skid layer.iii. size 5.5m x 5.5m.iv. the vinly cover of 5.5m*5.5m will have square demarcation of 4*4m with orange color and remaining arena with green color. the vinyl sheet should consist of 5 to 6 each metal grommets for fastening for all 4 edges., practice arena/ warm up arena for athletes 11x11 m (with demarcation of 8x8 and 10x10 m)a. base layer = wooden interlocking blocks. 121 pcs of size 1x1 m. the surface of wooden blocks is plain. it consists of 3 ply wood fastened together. each ply wood of approx. 18 to 20 mm. the base ply is fitted with hard form block of approx. 2 so as to provide height from the floor. the wooden structure is aided by form slope so as to provide a sudden sharp edge cut. with this foam slope. the foam slopes are of 2 fts long. it consists of cut in the form for interlocking with the wooden sheets/ structure.b. middle layer = interlocking mats of 121 nos. ofi. size= 1m * 1mii. density = 140 150 kg/cubic mtriii. hardness= 40 45 degree shore a.iv. thickness = 25- 30 mm.v. raw material = reva- r or virgin/pure eva (with atleast 18 % grade). c. top layer = vinyl mat cover of following specifications asi. material = heavy duty vinyl non abrasive and non tearing cover.ii. 550 gsm anti skid layer.iii. size 11.5m x 11.5m.iv. the vinly cover of 11.5m*11.5m will have square demarcation of 8*8m with orange color and 10*10m square demarcation with green color and rest remaining area with red color. the vinyl sheet should consist of 5 to 6 each metal grommets for fastening for all 4 edges., magn

CTN :38560430

03 Jan, 2025 NA

Mumbai - Maharashtra

Tender For supply of bill of qty - insulation sheet , design and development , removal of wooden block , consumables , services

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

CTN :38532867

21 Dec, 2024 NA

Mumbai - Maharashtra

Tender For supply of hull allowance items for y12651 rat guards,hull allowance items for y12651 heavy duty,hull allowance items for y12651 cnal items,hull allowance items for y12651 fenders,hull allowance items for y12651 fenders,hull allowance items for y12651 aluminium plates,hull allowance items for y12651 wood blocks and rawl,hull allowance items for y12651 fenders coir,hull allowance items for y12651 miscellaneous outfit item,hull allowance items for y12651 hammers_chisels,hull allowance items for y12651 life ring buoy,hull allowance items for y12651 electronics,hull allowance items for y12651 chain pulley block,hull allowance items for y12651 healthsafety and,hull allowance items for y12651 navigation equipment,hull allowance items for y12651 rigging items,hull allowance items for y12651 rigging items,hull allowance items for y12651 ropes,hull allowance items for y12651 ropes,hull allowance items for y12651 ropes,hull allowance items for y12651 eqpt _ tools,hull allowance items for y12651 chains,hull allowance items for y12651 cable

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

Wood Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector