Latest wood paneling Tenders | Government wood paneling Tenders

State Government

CTN :39631073

28 Mar, 2025 1.79 Crore

Junagadh - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka una under taluka panchayat,una under mgnrega (annual unit rate), dist. gir somnath - providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (a) foundationsfootings bases of columns etc. and mass concrete., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (b) flat surfacessuch as soffits of supspened floors slabs landings andthe like. (1) floors etc. upto 200 mm in thickness., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (g) columnspillarsposts and struts. (1) square rectangular polygonalin plan., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (h) (1) sides andsoffits of beams beam haunchings cantilevers girdersbressumers and lintels not exceeding 1 m. in depth., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (c) vertical surfacesuch as walls (any thickness) partitions and the likeincluding attached buttresses & string course & the like., providing and fixing 35 mm thick shutters for doors,windows and clear story windows including anodisedalluminium butt hinges with necessary screws. (a) indianteak wood (ii) fully glazed., steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, c.i. cover with frame 455mm x 610mm, c.i. cover with frame 500mm x 700mm, c.i. cover with frame 600mm x 850mm, cement (53 grade), coarse sand, coarse sand 5.0 k.m., coarse sand 5 to 10 k.m., coarse sand 10 to 15 k.m., coarse sand 15 to 25 k.m., coarse sand 25 to 50 k.m., coarse sand 50 to 100 k.m., common burnt clay bricks modular size 20x10x10 cm -, common burnt clay bricks modular size 20x10x10 cm - 5.0 k.m., 5 to 10 k.m., 10 to 15 k.m., 15 to 25 k.m., 25 to 50 k.m., 50 to 100 k.m., corrugated a.c. sheet 6 mm thick, crushed stone aggregate for hard quality 6 to 10mm size -, crushed stone aggregate for hard quality 6 to 10mm size - 5.0 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 5 to 10 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 10 to 15 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 15 to 25 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 25 to 50 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 50 to 100 k.m., crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10 to 20mm size 5.0 k.m., crushed stone aggregate for hard quality 10 to 20mm size 5 to 10 k.m., crushed stone aggregate for hard quality 10 to 20mm size 10 to 15 k.m., crushed stone aggregate for hard quality 10 to 20mm size 15 to 25 k.m., crushed stone aggregate for hard quality 10 to 20mm size 25 to 50 k.m., crushed stone aggregate for hard quality 10 to 20mm size 50 to

Central Government/Public Sector

CTN :39645418

22 Mar, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and supply and fix

CTN :39629720

17 Mar, 2025 8.53 Lacs

Bikaner - Rajasthan

Tender For inviting bid for furniture and utensils-, small steel almirah (for room), , one locker, max 22 gauge, 3 shelves, weight - min 32 kgs, , steel student table (for room), , sunmaika top, 30mm pipe, weight (of frame) minimum 13 kg and size (in feet), , 2'x3'x2.5 (minimum) board - mdf, , board / ripsa wood board (note:- should not be particle/bhussa board) board thickness minimum 12 mm, , s type steel chair(for room), , including wooden handle, round pipe 20 gauge maximum, seat and back in gi sheet, gauge 18 & 20 respectively, weight of frame - 5-6 kg, weight of sheet 1.5-3.0 kg, total weight 7.0-9.0 kg dimension in inches 16"x17"x32" (minimum), , steel cot bed(for room), , 12mm ply top, (isi / iso mark), , 50 mm pipe, weight (of frame) minimum 19 kg, dimensions (in feet) 6'x3'x1.5' (minimum), , nesting three sheeter, , pipe 40 mm and 20 gauge, sheet ms steel polish (product specification given by the manufacturing company for readymade product must be written), , capsule pipe chair (for warden room), , c.p. polish, wooden handle, 40mm pipe measurement (in inches) 24"x18"x36" (minimum), , (provided by the manufacturing company of readymade product), , (it is mandatory to write the product specification), , g.i. box, , maximum weight in 24 gauge sheet, minimum 45 kg, , dimensions (in feet) 6'x3'x2.5' (minimum), , office table (for warden room), , cup board and one drawer on one side, three drawers on other side, mica top with keyboard tray in 19mm board and mica finish,, , dimensions (in feet) 4'x3'x2.5' (minimum) (note:- should not have particle / sawdust board), , dining table (for mess), , sunmaica top, 30mm pipe weight (of fame) min 15 kg mdf board / ripsa wood board, board thickness min 12mm, , dimensions (in feet) 4'x2.5'x2.5' (minimum) (note:- should not have particle / straw board), , parat badi (20 kg capacity) (steel), , bhagona (20 kg capacity (aluminum), , bhagona (10 kg capacity) (aluminium), , big spoon(for vegetable)(steel), , big tongs (iron tongs), , chakla belan (wooden), , big tawa (iron), , jug (2 liter capacity) (steel), , pot (dhama 03 kg capacity) (steel), , kadai badi (iron) (5 kg capacity), , spade (iron), , drum big iron drum (for flour) (100 kg capacity), , steel containers (4 litres for spices), , teapot (steel), , ganga sagar (2 litre) (steel), , tank steel water tank big (100 liter capacity), , oil can, , flip/claws (steel), , pressure cooker (with isi mark), , bucket 20 liter capacity (steel), , flour sieve (iron), , vegetable cutting knife (steel), , salt container 100 gms capacity, , thali with two bowls (steel), , tea spoon (steel), , lotte (steel), , (knower, , quarter plate for breakfast (steel), , cup (steel), , tea kettle 10 liter capacity (aluminium), , tea tank medium size (steel 10 litre), , glass (steel), , gas furnace (normal), , gas oven (with roti-baking burner),

CTN :38274655

12 Mar, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras supply of match subcat - saw file 6 inch , double cut blunt hand saw file file round 2nd cut 200mm , single cut taper saw file round file second cut 200mm , religlas borosilicate glass low-form laboratory beaker size 200ml , borosilicate glass low-form laboratory beaker size 500ml , borosilicate glass low-form laboratory beaker size 1000ml , bosch corded small angle grinders, power 220-240v ac, 50by60 hz , 300mm try square with heavy duty hukums , try square 150mm , miranda tool 0.63mm thick flexible blade type b hacksaw blade , cut-off wheel, dia600mm , insulated wire stripper , wet and dry duty cleaning measurement vaccum cleaner 200 millibar , us tool chrome-vanadium steel insulated adjustable wrench 200mm , flexible braided hose id 10mm , 8mm bore air hose , hdpe milky white square plastic jerrycans 5 litre , atc cable 01 2.5 4 plain copper un armoured cable , havellers 4 core x 1.5 sq.mm, , polycab 1 core pvc copper circulated sheathed cable 1.5 sqmm 1c wire , roller tool cabinet 7 drawer tool trolly, size 680x459x900mm , mild steel high tensile bolts 10.9 grade size m4-m24 , pneumatic cutter tool , polyster ratchet lashing belts 35mmx3000kgs , rotary milling table size 20 x 17 x 5-1by2 high , stackeasy hand trolly, for industrial load capacity 300kd , stainless steel groz mechinist scriber , cordless polisher machine , first aid kit packing type box , force 4941-5 1by2 socket combination set 94pc , grade 10high tensile h.t. hex nut grd10.9 size 4mm - 24mm , hexagonal full thread high tensile 10.9 hex bolts size m6-m24 , high tensile socket countersink screw grade 10.9 size m6-m24 , ego blue 07 deluxe steel wire cutter plier , cora cotton cloth , carbon steel chisel cold flat, 6 inch , bosch metal surface finish gpo 950 , 10.9 grade square head bolts size m6-m24 , white banian cloth waste , stainless steel tap handle t-type driven size m1-m4 , ss spring divider caliper, size 125-300mm , iron flexon tailor scissors, size 10 inch , ldpe poly embossed film , screw pin type stainless steel d shankle set size 2x1.5inch 3x2 inch and 4x2.5inch , mild steel chamfering tools, 90 degree size 30mm , steel rule scale size 2000mm , steel rule scale size 1000mm , steel rule scale size 600mm , natural hdpe jerry can, for storage, size 2 litre , 6mm id 8mm od white pu polyurethane pneumatic air tubing , 16a wooden electric board with mcb with indicator , alloy steel hammer weight 2kg , ballistic goggles bsf specification , eye bolt 6mm , eye bolt m16 , hdpe bucket of capacity 20 liters , safety shoes- leather with pvc sole , stainless steel scale 15cm , stainless steel scale 30cm , permanent magnet lifter 1501- 2000 , automatic centre punch length 110mm , hydraulic jack cylinder, capacity 10 tonne , safewell rubber gloves for electrical purposes , caliper metal na for non changeble die crimping tool , single cut taper saw file size 300mm , round m4.5 engineers screwdrivers , osg screwing taps nominal diameter m16x1.5mm , xtra metal 6mm crimping tools , wd-40 rust remover solution, size 5 ltr in aersol , screwing taps hand and short machine , cast iron adjustable tap wrench size12mm , lcd display auto ranging digital earth resistance meter 0-10 ohms , lever type with screw down follower grease gun max pr-300kgf sq.cm , ring spanner set 6x7 to 30x32 mm , square stable rubber mats 1 mt x 1 mt , metal insulated hacksaw frame 12 inch , acetyle acetone grade tc , disposable surgical gloves 7.5 inch , carbide drill dia 10mm length 100mm , allen key two way key set 1by16 to 3by8 inches , bench vice 12 inch taparia , coiled wire hot air gun blower, airflow- 500-650 l min , high speed steel wood cutting circular saw bid details/ 2 / 92 3 inches , coiled wire hot air gun 350-550 l min airflow , heavy duty pipe wrench 300 mm , tungsten carbide wood cutting circular saw 4 inch , insulated adjustable wrench 200 mm , electric bench grinder, drilling capacity upto 32mm , dynamic polish machine and shining machine 280x210mm 4 kg weight , alumi

State Government

CTN :39646076

31 Mar, 2025 15.00 Lacs

Umaria - Madhya Pradesh

Tender For item supply of budan wood door window and frame

corporations/Associations/Others

CTN :39620368

11 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of chennai -1_ copper pipes scrap,chennai -1_ms iron_scrap,chennai -1_aluminum sheet scrap,chennai -1_pvc scrap & empty barrels,chennai -1_faulty exhaust fan and monoblock pump,chennai-2_ac duct, roof sheet & fitting cover,chennai-2_aluminium- hot/cold asile frame,chennai-2_copper cut cables,chennai-2_cable drum and wood pallet,chennai-2_cotton box,chennai-2_metal fire door

Central Government/Public Sector

CTN :39606467

28 Mar, 2025 4.97 Lacs

Kangra - Himachal Pradesh

Tender For supply of general workshop items - hand drill machine , drill bit , angle grinder blade set ,angle grinder blade metal cutting , combination plier ,sand paper , scroll saw blade , wood carving tool ,jewellery hacksaw blade and frame , wire cutter forjewellery , flat nose plier for jewellery , round nose plier forjewellery , plier for jewellery , turning tool , parting tool ,boring tool , drill bit shank , shank rotary drill bit , gloves , gogles , helmets , apron , paint brush , diamond halfround needle file , diamond round needle file , diamondflat needle file , diamond quartet needle file , diamondtriangular needle file , end mill , milling cutter , bamboomanual long slicer machine , bamboo strip bendingmachine , bamboo sizer machine , combi tool accessoriesset 40 pc , pottery tool kit 35 pcs , electric potters wheel ,3d pen , pyrography pen , soldering kit

Central Government/Public Sector

CTN :39605744

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil

Central Government/Public Sector

CTN :39605765

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply and fitment of acp informa?onboard made by lit vinyl eco solventprinting with lamination pasted on acpboard with 1 inch hollow steel barstructure and aluminum channelfinishing with lettering and printing size38 mm x 25 mm with clips and screw of a-1 .detailed descrip?on as decided bysse/tws/rtm . supply and fixing of boardswith all material t&p at various sta?ons of rtmdivision. ,supply and fitment of acp informa?onboard made by lit vinyl eco solventprinting with lamination pasted on acpboard with 1 inch hollow steel barstructure and aluminum channelfinishing with lettering and printing size38 mm x 25 mm with clips and screw of a-1 .detailed descrip?on as decided bysse/tws/rtm . supply and fixing of boardswith all material t&p at various sta?ons of rtmdivision. , supply and fixing of incumbency boardfor divisional officers chamber made ofteak wood withcarving work all foursides top portion half round withdesignation carved cutting in woodenplank back ply wood 6mm thick withfinished or polished with properhanging arrangement. all previousname and date of officer with vinilecutting letter of suitable font sizes ofboard shall be space available onchamber walls size 4x2 ft. or 5 x 2.5 ft , retro reflec?ve sigma board of size 600mmx450mm x2 mm with retro-reflec?ve sigma stripand board remains non- illuminated as perrdso spec. no. eti/ohe/33a (12/97) rev-8(11/2012) or latest and drg. no.ti/drg/ohe/pltbrd/rdso/00036/12/0.accepted make- firm's self. (warranty period :upto 30 months from the date of delivery.) , display boards of various size made of acp(aluminum composite panel) of 3mm thicknesspasted with inkjet vinyl 1440 dpi printeds?ckers. prin?ng ma?er will vary for each board(size of board and prin?ng ma?er to becollected from consignee at the ?me of prin?ng) each board to be with four numbers of3mm holes in the corner and to be fixed withmetal eyelets , white board with aluminum framed displayboard 2400 mm 1200 mm, non-magne?c 2 in 1whiteboard and chalkboard, unmatchedflexibility for any space, with a generous wri?ngarea make-aurum display or similar , laminated engagement board/ wihite boardwith colour pen & duster , supply, installa?on and commissioning of thedisplay board made of aluminiumcomposite panel sheet with inkjetprinting (multi- colour). the borad to beframed with suitable steel square tubesand aluminium beading. thickness of theboard should not be less than 3 mm. theboard should have suitable hangingarrangement( 2 hooks at top). [ note:print content will be given by theconsignee as and when required.staggered supply has to be made as perthe requirement of railways. supply to bemade on urgency basis where and whenrequired as per the consigneerequirement.hence firm may quote withdue consideration of above.] , display boards made of aluminiumcomposite panel sheet with inkjetprinting (multicolour). the borad to beframed with suitable steel square tubesand aluminium beading. thickness of theboard should not be less than 3 mm. theboards should have suitable hangingarrangement( 2 hooks at top). [ujjain75sqft ] of railways. content will be given byconsignee. , z web medium traffic vinyl nonwoven higherdirt scrapping, water removing rug, specialpolymer tu?s loop design mat with twin bladeopera?on. size: 1000 mm x 1500 mm x 09 mmthick. color = grey , set of vinyl s?ckers as per annexure a for melaspecial train rake 2024-2025 , supply, installa?on and commissioning ofgrooved welcome board with red velvetwooden board with frame and complete fi?ng(stainless steel) and le?er kit for welcomeboard: one set of 1.5 inch, one set of 1 inch &one set of 0.5 inch. supply as per specifica?ona?ached

CTN :39606139

28 Mar, 2025 NA

Jaipur - Rajasthan

Tender For supply of lock for file compcter , books , keyboard , mouse , adopter for pc , hdmi cable , hdmi switch poart , updating name on appt board , do pad , coffee mug , glass large , white envelope , cup saucer , dustibin plastic , spanner de , adjustable spanner , water tub , envelope , appreciation certificate , cable network , dsc token , electric kettle , table centre with glass top overall dimension 4 feet x 2 feet made of first class hard teak wood with 10mm glass bevelled at all around with double itching line design , leatherette chesterfield 5 seater bracket 3 plus 2 seater sofa in olive green finish , flag stand made of first class teak wood size 760mm x 760mm x 150mm with 25mm 03 brass pipe 25mm of standard length duly polished. flag stand should be melamine polish with dark walnut shade , chair writing of size 22 inch length 21 inch depth 38 inch height made of first class teak wood frame with curved armrest upholstered with olive green leatherette seat and back , peg table with glass top 18 inch x 18 inch made of first class hard teak wood with 10mm glass bevelled at all around with double itching line design qty

Wood Paneling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector