Latest work platform Tenders | Government work platform Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

State Government

CTN :44833271

20 Apr, 2026 50.00 Lacs

Jalore - Rajasthan

Tender For close graded gsb material as pert table /400 a , aggregates 45 mm to 2.8 mm , aggregates 6 mm nominal size , stone crusher dust finer then 3 mm with not more than 10% passing , 0.075 sieve , cost of water , padla/kekar/jhaara , mortar/mud mixture , kiln lime for lime masonry work , cement , ppc , white cement , fine aggregate , sand/gravel , gravel-local , rakhi (fly ash) , surkhi , stone dust (in masonry) , ballast stone/brick (for other than road work) , 40 mm measuring stone (hand-broken grit) (voids cut 1/11) , 40 mm grit stone (crushed) (voids cut 1/11) , 20 mm grit stone (crushed) , 12/10/6mm grit stone (crushed) , brick mortar , material for road work (including 5 km lead) , 63-40 mm crusher crushed stone road (voitus cut 1/11) , 63-40mm hand-broken stone rod (voids cut 1/11) , 90-45mm hand-broken stone rod (voids cut 1/11) , quarry rubbish (voids cut 1/6) , gravel (voids cut 1/6) , kankar (voids cut 1/6) , binding material (pi 4-6) (voids cut 1/6) , up to 5 km , 5 km to 10 km additional fare per km. , 10 km to 20 km additional per km. , for distances above 20 km, additional charges per km will be levied. , laying of gravel, karkar, quarry rubble and coarse aggregate in thickness less than 15 cm (without crushing) in the prescribed camber and grade of the road, spreading and pressing with roller of 8-10 ton weight, tamping and all charges including water charges and hire charges of tools and machinery. , g25nun 7.50 cm) , first class , second class (under class) , soling/ kharja masonry tiles , chinnai derha (rr) , masonry remains (cr) , kharja soling (for floor work up to 15cm height) , kharja soling (23 cm height for road/kharja work) , jodhpur type stone slabs/bows/slabs (length 2-3', height 10-12', thickness 25-35") , flaky material (3-4" thick & length and width 1-2") , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , up to 25 mm thickness , up to 25-40 mm thickness , up to 40-50 mm thickness , up to 50-75 mm thickness , up to 75-100 mm thickness , up to 100-150 mm thickness , paving stone , floor slabs upto 35 mm thick, min. 3 sqft or more area , katla for patti patan 60-75 mm, min. 3 sqft or more area , unpolished rough kota stone , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , polished kota stone (one side polished) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble stone (makrana adanga 20 mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble chips , marble powder , marble stone (rajnagar ii quality / local_20mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , stone frame , single pattern size 100 x 75 mm. , double paitam size 125 x 75 mm. , stone slabs , up to 1.5 m length, minimum 40 mm thick , 1.5 m to 2.40 m length, minimum 50 mm thick , 2.4 m to 3.0 m length, minimum 65 mm thick , above 3.0 m length, minimum 75 mm thick , precast tiles / blocks , glazed size-30x45 cm , mosaic size-40 mm thick , vitrified size-60x60 cm , cheekered tiles size-30x30 cm , interlock tiles/brick/block for road work , cement interlocking block m-30 grade, 60 mm thick , cement interlocking block m-30 grade, 80 mm thick , cement interlocking block m-30 grade, 100 mm thick , local wood with fittings (for doors, windows and furniture) , acacia , other (teak) , factory made doors (30 mm thick, solid core single pane) , structural steel , iron (or steel fe 415/500 for reinforcement) , winding wire 18 gauge , iron guard , conical iron / square rebar / leaf / angle iron , barbed iron wire (size 12 gauge wire and 12 gauge strad/12 gauge wire and 14 gauge strad/14 gauge wire and 14 gauge strad) , forged , iron mesh (24 gauge, 14 mesh) , cement concrete lattice sky patal 40mm thick , glass , 3mm thick glass , 5mm thick glass , color paint , inamil paint , distemper (water bound) , lime - for whitewashing (aras / bud) , primer (for iron/wood) , exterior paint , plastic paint , cement paint , petroleum products , diesel hsd

Private Sector

CTN :44885026

23 Apr, 2026 NA

Multi City - Delhi

Tender For procurement of insulated aerial work platform with tools for maintenance of overhead sections upto 11kv/ 33kv in various locations of brpl

CTN :44883983

23 Apr, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of chain conveyor system installation , dismantling and shifting of existing conveyor system , conveyor mid section drive unit , conveyor helical drive unit supply installation , fabrication and installation of mid drive assembly , conveyor bend section supply installation , supply and installation of stainless steel plates , shifting of 24head platform , shifting of 24head adjustment scale , 12inch and 14inch pipeline laying work , welding and cutting of hydrant pipeline , anti corrosion wrapping coating of hydrant pipeline , replacement of 12inch valve , supply of industrial chipping machine , rcc , connection of msv vapour pipeline , supply and installation of 1inch pipeline , painting of 6inch pipeline , installation of isolation valves , replacement of channel structure , repair and maintenance of telescope booms , chain conveyor system supply , supply of stainless steel soap trays , supply of mild steel soap trays , supply of heavy duty soap trays , fabrication of pipeline and structural side cladding , supply and installation of drip trays with y bend

CTN :44866394

20 Apr, 2026 6.70 Lacs

Varanasi - Uttar Pradesh

Tender For provide & fixing of aluminium partition and false ceiling work and making of working platform in laboratory-9 in the dept. of pharmaceutical engg. and technology, iit(bhu), varanasi.

corporations/Associations/Others

CTN :44883609

24 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For providing of customized amc/cmc for pre-owned products - supply of heavy duty barbed wire fencing jali made of high-quality galvanized iron wire, suitable for boundary fencing work, corrosion-resistant and durable- rate for per kilogram; supply of heavy duty barb..,customized amc/cmc for pre-owned products - supply of mild steel (ms) angle of size 50mm x 50mm x 5mm thickness, confirming to standard quality, suitable for structural and fencing support work- rate for per kilogram; supply of mild steel (ms) angle ..

State Government

CTN :44833880

15 Apr, 2026 NA

Port Blair - Andaman And Nicobar Islands

Tender For repair and replacement of ci sluice valves structural steel work stainless steel rod and split plummer block bearing housing situated inside the intake well at dhanikhari dam

Central Government/Public Sector

CTN :44654989

22 Apr, 2026 NA

Bhagalpur - Bihar

Tender For corrigendum : supply of aerial work platform-100268938

Central Government/Public Sector

CTN :44121968

18 Apr, 2026 NA

Tumkur - Karnataka

Tender For bid to ras supply of working platform(lh) - coupling jig p/n lchskh 0048/lh tooling , working platform(rh) - coupling jig p/n lchskh 0048/rh tooling , working platform main jig-2 p/n lchskh -0028 tooling jigs , storage stand-tailboom locator beam tooling p/n lchskh 0049 jigs hdt , storage stand-tailboom locator beam tooling p/n lchskh -0049 jigs hdb

CTN :44696282

18 Apr, 2026 NA

Panipat - Haryana

Tender For corrigendum : procurement of high strength structural steel bolts hot dip galvanized for works contract as per eil spec related to works contract for the composite work for avu units part a for p25 project of iocl panipat refinery

Work Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Private Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector