Latest zinc primer Tenders | Government zinc primer Tenders

CTN :39431121

13 Mar, 2025 5.16 Lacs

Kangra - Himachal Pradesh

Tender For supply of supply and fixing of ppgi sheet for view cutter , supply and fixing of gi chain link fence for view cutter , supply and fixing of wire mesh for view cutter not less than two mm , supply and fixing of ms poles both vertically and horizontally for view cutter , material and labour for newly iron structure by applying two coats of synthetic enamel paint over it and one coat of red oxide primer complete in all respect

CTN :39402878

12 Mar, 2025 NA

Dimapur - Nagaland

Tender For supply of ordinary portland cement grade 53 , sand fine best quality , stone aggregate graded 10 to 20mm , stone aggregate graded 20 to 40mm , stone aggregate graded 40 to 63 hardcore , prior sub base course 30 to 35cm dia , precast cement concrete brick , 400 microne thick polythene film , chloride free accelerating , water reducing admixtures , wet hasseing cloth , 12mm dia ployethelene backu rod , 10mm dia polyethelene backup rod , primer for sealing compound , polyurethane based ceiling compouned , acrylic based pavement road marking paint , vibrator needle 60mm , needle 60mm for vibrator , pan mortar , spade medimum size , shovel , hammer 500 gm , hammer 1 kgs , mason hammer , bucket plastic 20 ltr , measuring tape 30 mtr , measuring tape 5 mtr , water pipe , trawler bricks , trawler rectangular iron , aluminium rectangle pipe , mason thread , water level , plum bob , mason square , sprit level , leather hand gloves , gum boots , cutter plier , hdpe drum 200 ltr , groove cutting machine , nails all size , cube moulds , wheel barrow

State Government

CTN :39387236

26 Feb, 2025 9.83 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39387237

26 Feb, 2025 11.28 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

CTN :39093786

22 Feb, 2025 22.00 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras supply of elect and sanitary stores - with louvers , plug top 3 pin 16 amp , plug top 3 pin 6 amp , pvc cable 4 sqmm 2 core copper , pvc cable 6 sqmm 2 core copper , pvc casing capnig t 25mm dia , pvc casing capnig l bend 25mm dia , pvc casing capnig square box 4 inch x 4 inch , pvc ceiling rose 2 oblique 3 terminal , pvc copper cable 1.5 sqmm black green and red sc 90 mtr , pvc copper cable 2.5 sqmm black green and red sc 90 mtr , pvc copper cable 4 sqmm green sc 90 mtr , pvc swich bd 8 inch x 10 inch , pvc switch bd 4 inch x 4 inch , pvc switch bd 4 inch x 6 inch , pvc tape insulation 25 mm wide 9 mtr long , smoke alarm , socket 3 pin 16 amp , socket 3 pin 6 amp , street light led 120w , street light led 60w , sunmica bd with wooden bd 4 inch x 4 inch , sunmica bd with wooden bd 4 inch x 6 inch , sunmica bd with wooden bd 8 inch x 10 inch , switch 15 oblique 16 amp , switch 5 oblique 6 amp , switch socket combination 5 pin 16 amp with gang box , switch socket combination 5 pin 6 amp with gang box , xlpe heavy duty armoured 10 sqmm 2 core aluminum conductor , xlpe insulated heavy duty armoured multi core cable 16 sqmm 2 core , xlpe insulated heavy duty armoured multi core cable 6 sqmm 2 core , computer chair , computer table , office chair , office table 1500 x 900 x 750mm , pvc chair with cushion , acrylic sheet 3 feet x 4 feet x 3mm , acrylic sheet 4 feet x 6 feet x 4mm , adhesiver solution sh , adhesiver solution sr 505 , bow handle oblique door handle , bukhari with complete accessories. , carborator for fd heating device , carborator inlet pipe for bukhari , carborator outlet pipe for bukhari , cement primer , clamp for curtain steel , glass shelf of toughned glass with chromium plated steel frame , cp bib cock 15mm short body , cp bib cock long spout 15 mm , cp stop cock 20mm , cp towel rail 600mm long 20mm dia , curtain ball steel , curtain rod steel , door hinges size 4 inch long medium weight steel , door stopper with isi marked , european wc with s or p trap concealed of size 650 x 405 x 770mm with sheet cover , false ceiling panel 1000 x 3120mm long , fire extinguisher capacity 2 kg alongwith its accessories , corner shelf of toughned glass with chromium plated steel frame , hdpe sand bags , hdpe water storage tank 500 ltr 3 layer , heating rod 2000w , hinges 100mm make spider with isi marked , hydraulic door closer , iron foot scrapper , kero heater batti , looking mirror frameless of size 600x450x5mm with 4mm ply baking , looking mirror with pvc frame 21 inch x 15 inch , m seal 200 gm pkt , mattress good quality size of cushion is 6 feet x3 feet , motor bhatti complete set , ms binding wire not less than 0.9mm dia , nails assorted 0.5 inch to 6 inch , non skid ceramic tiles 300 x 300mm , non skid ceramic tiles 600 x 600mm , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint brush 6 inch , paint red oxide , peg stay , plywood 6 feet x3 feet x 10mm , plywood 6 feet x3 feet x12mm , plywood 8 feet x 4 feet x 4mm , ppgi sheet 10 feet x 3 feet x 0.63mm , ppgi sheet 12 feet x 3 feet x 0.63mm , ppgi sheet 8 feet x 3 feet x 0.63mm , pp-r pipe pn 20 oblique sdr-6 3 layer with outer dia 40mm , pp-r wall clamp dia 32mm with isi mark. , pvc elbow 110mm , pvc elbow 75mm , pvc flushing cistern 10 ltr capacity , pvc pipe 110mm 3 mtr long , pvc pipe 75mm 3 mtr long , pvc socekt 75mm , pvc socket 110mm , pvc tee 110mm , screw full thread 1 inch 75 pices , screw full thread 1 oblique 2 inch 75 pices , screw full thread 2 inch 75 pices , screw full thread 3 inch 75 pices , screw full thread 4 inch 75 pices , self taping screw 1 inch long , self taping screw 2 inch long , self taping screw 3 inch long , silicon tape. , bid details/ 2 / 119 sliding bolt 100mm with isi marked make classic , soap dish chromium plate , ss urinal bowl flat back size of 465 x 355 x 265 mm white colour , stainless steel iwc of size 580mmx440mm with cistern 10 ltrs cap , steel screw 1 oblique 2 inch size full thread 100 nos pkt ,

CTN :39402276

01 Mar, 2025 50.00 Lacs

Amroha - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab - vocational lab; teacher training; buyer - applicator brush , hydraulic arm chair with footrest , blackhead remover , body massage bed , bowles , curling iron (curling tong) , cutting scissors , decorative pins boxes , wax heater , dustbin , exfoliation machine , eyebrow pencil sharpener , facial steamer , foot scraper , foot spa , galvanic machine , hair brush , hair connector , hair dresser chair/stool , hair dryer , hair steamer , hand mirrors , infrared lamp , jumbo rollers set , large stools , magnifying glass , make up palate , manicure/pedicure set , manicure table , measuring cup and spoon sets , measuring glass sets , modular mirrors , paraffin heater , perming cap , pin curl clips boxes , razor with blade , roller brush set 5 in 1 , shampoo unit , small scissors , small stools , spatula , spray bottle , sterilizer , stone therapy set , straightening iron , hair dye brush coloring kit , tweezer , working and facial trolleys , writing board (with stand) with white board marker , and duster , all in one eyelash brush/comb , all purpose comb , barber brush , bleach brush , complete make up brushes set , cutting sheets , frosting cap , nail paint , tissue box , hand sanitizer , garbage bin/bags , mop , large tooth comb , ladies/kids cut catalogues , eyebrow thread , wax strips , cold wax , paraffin wax , massage cream , pedicure scrub pack , pumic stone , manicure and pedicure shampoo , hair shampoo , hair spray(medium hold) , nail paint remover , nail base coat/ top coat , cotton wool , bob pin, u pin, invisible pin , stuffing/ donut , rubber band , barber razor , lipstick pallet , blusher pallet , eye liner , mascara , cleansing milk , moisturizer , face pack , face scrub , bindi (assorted) , makeup primer , gown , apron (with front pockets) , towels (full size) , disposable hand gloves , medium and small hand towell , desktop , internet access , seize fire extinguisher , first aid kit , iron almirah , tailor scale l curve , tailor scale hip curve , tailor scale yard stick , tailor scale french curve , woodne cutting table , sewing gauge , skirt hem maker , male, female & kid dress form standard size , tracing wheel , fabric scissor (10 no) , pinking shears , hand sewing machine woodne base and , steel/plastic , sewing machine (traedle) , single needle ubt (industrial machines) , steam iron , iron , press board , display board (44ft) and with board , hanger stand 1 , mirror , sitting stool , screw driver set (6 pieces) , screw driver set (star type & flat type) , long nose pliers , combination pliers , sewing kit , overlock machine , pattern notcher , pattern master , paper cutting scissors , metal scale - 1 metre (100 cm) , embroidery threads (good brands) , stain remover gun , writing board with white board marker and duster , measurement tape , brown sheet , yellow carbon paper , muslim cloth , seam rippers , thread clipper , hand needles, machine needle (all size) , machine thread (all colors) , bobbin and bobbin case (according to machine , type) , macnine oil , oil keeps , plastic box/basket all size , embroidery frames , fabric marking chalk (tailor chalk) , basic stationary items , first aid box , auger , dutch hand hoe , hori hori knife , long handle hoes , garden hand tools , garden hoes , garden rakes , garden/digging fork , garden/digging spade , rabbiting spade , hand screens/sieves , onion hoe , knapsack sprayer , leaf rake , levelers , garden pruning saw , pruners , pruning knife , secateurs , specialty spades (shovel) , soil scoop , sprinkler irrigation unit , trowels , watering can , plastics baskets , water hose , seed cleaner , seed treating equipment , plug trays , ph meter , power tiller , wheel borough/cart , khudali , soil testing kit , models of tractor implements used in crops , bucket knapsack , hand automizer sprayer , pheromone trap for major insect pest (available in , local market) , rotation drum , charts related

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Zinc Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector