Udhamsign Nagar Tenders | Govt. Tender Udhamsign Nagar

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

Co-operative

CTN :45096132

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For vacuum filter spares and repairs

Co-operative

CTN :45061844

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of pipe and pipe fitting

State Government

CTN :45016042

14 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For est for providing of de-centralized material at lalpur s/s under edd kichha. - annexure - b ( supply ), empire tape 10 mm width 10 mtr long, m-seal compound, rub packing washer set 25-100 kva, al crimping type lugs 300 sq.mm, al. crimping type lugs 150 sq.mm, al. crimping type lugs 120 sq.mm, al crimping type lugs 630 sq.mm, al crimping type lugs 400 sq. mm, al. crimping type lugs 240 sq. mm, al. lug long barrel 240 sq. mm., lt pvc tape, ht tape, fuse wire, silica gel

State Government

CTN :45005405

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : fabrication and erection job

Co-operative

CTN :45096133

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For compressor spare and annual maintenance contract

State Government

CTN :45156765

28 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For work of complete plate electrode ground earthing works of ce(d) rudrapur zone, rudrapur edc rudrapur and etd rudrapur under etd rudrapur

Co-operative

CTN :45096136

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For repair of centrifugal machines

Co-operative

CTN :45061842

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of tools and tackles - h.s.s. tool bit having 10% cobelt l&t/addison/miranda/rohit make all size, high speed tool steel having 10% cobelt all size german make, carbide tip tool left / right hand (miranda/widia/sandvik make) size 1/2", 3/4", 1", "v"/"u" shape carbide tips miranda/ widia/sandvik 1/2", 3/4", 1", h.s.s. drill tapper shank twist and straight shank it/addison make all size, four jaw chuck/dock chuck, double slote best quality size 12", high speed steel tap set totem make all size, bastered file, pipe wrinch, spanner allenkey set all other such tools of j.k./jhalani/everest make (all type/all size), chain pully block complete with test certificate (indef make)1 ton, 2 ton, 3 ton, 5 ton, load chain for chain pully block with t.c.01 ton capacity, 02 ton capacity, 03 ton capacity, 05 ton capacity, tube expender (power master)39 to 42 mm, 42 to 45 mm, 57 to 65 mm, 74.6 to 84.2 mm, 76.2 to 85.5 mm, 96 to 100 mm, ratchat for tube expender, size 3/4", size 1", power hexa blade(miranda) 18"x1.5"x10 tpi, grinding dressure/ diamond dressure 6"x12", adjustable reamer for 2.5" tube, angle grinder (wolf/bosch/makeeta make) size 4", 5", s.s. wire rope sealing with eye loop both side (i) 1/2" x 1 mtr, (ii) 1/2" x 1.5 mtr, (iii) 1/2" x 3 mtr, (iv) 1/2" x 10 mtr, (v) 3/4" x 3 mtr., (vi) 3/4" x 10 mtr., (vii) 1"x5.35 mtr.x 400 mm, (viii) 1" x 5.25 mtr.x400 mm, (ix) 1"x 2.5 mtr. x 300 mm, en-8 shaft. (with test certificate) (i) up to od 4", (ii) up to od 5" & above, en-9 shaft. (with test certificate) (i) up to od 4", (ii) up to od 5" & above, steel wire rope sling steel core 6/36 construction with double ferrule machenically sliced having 2ft. (600mm) eye both sides recommeded safe working load 10.5 ton with test certificate size - 28mm x 12.20 mtr, champion (hammer) make high pressure steam jointing sheet, style-54 metallic size-3mm, champion (hammer) make high pressure packing s.s wire, style-1916 in standard coil of 6 mtr, size 6mm, carbide tip, grade ts-20, size 1" (v shape) sandvik/widia make, taflon round bar, size 4" 1 , size 5" 1 , high carbon steel hexa blade 1/2" 12" (miranda make only), teflon rod size 1" 12", chief engineer

Co-operative

CTN :45126451

22 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For s.s. copper brass liner/wire netting and dsm screen etc

Udhamsign Nagar Uttarakhand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors