Advertisement Service Tenders

Central Government/Public Sector

CTN :44993837

05 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of pivot liner( vertical) for wap-1/4 half material phenolic resin bonded fabriclaminate having a solid lubricant dispersed throughout the matrix for self lubricating purpose and having a flexunal strength of 950 kg/sq.cm and compression strength 1000 kg/sq.cm. to clw drg. no. 03/4/12/2 alt-4 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44992873

15 May, 2026 7.14 Lacs

Raigad - Maharashtra

Tender For supply of rearrangement of utp cat6 cables , rearrangement laying of voice cables , supply laying and comm of cat6 utp cable through pvc conduit casing caping flexible pipe , supply laying and comm of four pair category 5e cable through pvc conduit , install and comm of 12u network rack in network room , install and comm of 100x100 pair mdf in network room , supply install and comm of 9u network rack at ground floor with pdu cable manager and jack panel , shifting install and comm of cctv system , supply install and comm of information outlet , supply install and comm of rj11 module with face plate and surface mount box , supply install of cat6 cable for replacement of faulty node network connection , supply install of cat6 utp patch cord 2 meter , supply install of cat6 utp patch cord 3 meter , supply install and comm of pvc conduit pipe 32mm , supply install and comm of pvc conduit pipe 50mm , supply install and comm of pvc casing caping 32mm , supply install and comm of pvc casing caping 50mm , supply install and comm of pvc flexible pipe 32mm , supply install and comm of pvc flexible pipe 63mm , testing identification of cables and labelling

corporations/Associations/Others

CTN :44991565

09 May, 2026 NA

Shahdol - Madhya Pradesh

Tender For providing of non paper printing services - area based - flex & banners; digital; pvc (as per iso/iec 7810),paper-based printing services - printing with material; pamphlet and banner; digital

Central Government/Public Sector

CTN :44992568

15 May, 2026 NA

Tadepalligudem - Andhra Pradesh

Tender For supply of new distribution boards in several locations c c - 100a 4p mcb three phase outdoor copper channel feeder panel , 63a 4p mcb three phase outdoor copper channel feeder panel , 1inch x 10mm ss nut and bolts with washers , depth 2 feet and 1 feet width excavation and refilling , civil work concrete mix with excavation and refilling , provision of earth pits , 4c x 16 sq mm copper cable , 2 1by2inch orange flexible pipe , 4 core x 16 sq mm one end termination brass gland

Central Government/Public Sector

CTN :44992561

06 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of 10 sq.mm, yellow colour, electron beam irradiation curing process thin walled flexible elastomeric cable with copper conductor suitable for rolling stock application conforming to rdso spec.no.elrs/spec/elc/0019, rev.4, feb-2018, 1.8 kv grade. note- 1.electron beam irradiated cross linked cables are only acceptable. 2.firms are requested to indicate conformance of the same in the offer. 3.cables shall be supplied in coils of 500 metres length and left over quantity in multiples of 100 meters with a tolerance of +/-5% on the length. as per drg.no. rdso spec.no.elrs/spec/elc/0019, rev.4, feb-2018, as per specn. rdso spec.no.elrs/spec/elc/0019, rev.4, feb-2018 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44998586

01 May, 2026 NA

Bhusawal - Maharashtra

Tender For supply of pvc insulated copper cable single core and multi core circular sheathed with flexible conductor (v2) isi marked to is 694 (q2)

Central Government/Public Sector

CTN :44996281

11 May, 2026 NA

Multi City - Multi State

Tender For supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60e1r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 3 or latest alt if any with elastic fasteners and spring operated setting device (rdso-t-6216 with latest alteration), confirming to irs specification no. t-10-2025, irs t-12-2009 for flat bottom rails and irst- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp withconfirming to irs specification t-55-2025 (rev. 1) or latest if any and supply of all components/fittings listed as per part-a and excluding elastic rail clips, metal liner/insulating liner (hvn), check rails etc.(the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection.(the inspection certificate should be attached) (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost/per set) in terms of railway board letter no. 2022/track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching/embossing on each set of tws, so that it can be correlated with the type of set-i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings as mention in rdso drg. t-9775 alt. 3 of part 'c' [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44983219

04 May, 2026 NA

Dapodi - Maharashtra

Tender For supply of flexural testing apparatus of concrete - is 9399 (q3)

State Government

CTN :44997509

04 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - provinding and fixing of new auditorium chair for audi hall total height from floor : 1020 mm+/- 10mm width centre to centre : 565 mm+/- 10mmdepth 10mm seatheight : 450 mm+/-10mmarm height : 630 mm +/- 10mmside leg : 50x2 mm ms chanel grouting supporting plate welded : 80x325x1.6 mm with 2 hole deep draw moulded foot rest. back assembly (hr)polyurethane foam is moulded with density=45+/-5kg/m3 ahardness load 17+/-2 kgf as per is: 7888 for 25% compression. inserted cr pipe 19x1.8mm supported by nylon strap. back size is 710x460x110 mm with covered by ppcp coverthe chair is provided with a fix back / pushback /flexi back and seat auto tip up with 2 rivers spring mechanism.seat assembly (hr) polyurethane foam is moulded with density=48+/-5kg/m3 and hardness load 18+/-2 kgf as per is: 7888 for 25% compression. upholster with 3layer laminated fabric 100% polyester and inserted cr pipe 19x1.8 mm. supported by 25x3mm flat, seat size 490x450x150mm. with covered by ppcp cover.arm rest / writing tab. the armrest is made wooden arm & hipc writing table with aluminium & ss alloy. powder coating all metal components is powder coated in black colour 70-80 micron

State Government

CTN :44997510

04 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - provinding and fixing of new auditorium chair for audi hall total height from floor : 1020 mm+/- 10mm width centre to centre : 565 mm+/- 10mmdepth 10mm seatheight : 450 mm+/-10mmarm height : 630 mm +/- 10mmside leg : 50x2 mm ms chanel grouting supporting plate welded : 80x325x1.6 mm with 2 hole deep draw moulded foot rest. back assembly (hr)polyurethane foam is moulded with density=45+/-5kg/m3 ahardness load 17+/-2 kgf as per is: 7888 for 25% compression. inserted cr pipe 19x1.8mm supported by nylon strap. back size is 710x460x110 mm with covered by ppcp coverthe chair is provided with a fix back / pushback /flexi back and seat auto tip up with 2 rivers spring mechanism.seat assembly (hr) polyurethane foam is moulded with density=48+/-5kg/m3 and hardness load 18+/-2 kgf as per is: 7888 for 25% compression. upholster with 3layer laminated fabric 100% polyester and inserted cr pipe 19x1.8 mm. supported by 25x3mm flat, seat size 490x450x150mm. with covered by ppcp cover.arm rest / writing tab. the armrest is made wooden arm & hipc writing table with aluminium & ss alloy. powder coating all metal components is powder coated in black colour 70-80 micron

By Cities

By States

By Agencies

By Ownerships

By Sectors