Ash Handling System Tenders

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con

CTN :38582355

20 Dec, 2024 NA

Salem - Tamil Nadu

Tender For mtps-ii - mi circle - o&ahs - dragging out the floor ash under d pass of esp by using the front end bar loader to facilitate the manual unloading hopper ash at d pass

CTN :38582356

20 Dec, 2024 NA

Salem - Tamil Nadu

Tender For mtps-ii - mi circle - o&ahs - dragging out the floor ash under c pass of esp by using the front end bar loader to facilitate the manual unloading hopper ash at c pass

CTN :38582357

20 Dec, 2024 NA

Salem - Tamil Nadu

Tender For mtps-ii - mi circle - o&ahs - dragging out the floor ash under b pass of esp by using the front end bar loader to facilitate the manual unloading hopper ash at b pass

CTN :38582358

20 Dec, 2024 NA

Salem - Tamil Nadu

Tender For mtps-ii - mi circle - o&ahs - dragging out the floor ash under a pass of esp by using the front end bar loader to facilitate the manual unloading hopper ash at a pass

State Government

CTN :38585849

06 Jan, 2025 5.66 Lacs

Gandhinagar - Gujarat

Tender For supply of expansion bellow & orifice cone for unit no. 3&4 esp ash evacuation system at gtps.

State Government

CTN :38229148

18 Dec, 2024 40.65 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : spares for esp model no. 2xfaa-9 x 37 5m-2x1 16150-2 for bhel make boiler of 2x250mw unit no. 10 and 11 stps, sarni. mppgcl - spares for esp model no. 2xfaa-9 x 37 5m-2x1 16150-2for bhel make boiler of 2x250mw, outer arm for eerm,as per drg., code:-05506200123-01, outer arm for cerm (as per drg. enclose), moc-en-8, code:-045105110274-01, u profile clamp for collecting electrode, code:-91604819651-01, emitting electrodes (spiral with hook, dia- 2.7 mm), code:-91604819376-01, inner arm (clamp)along with fastner (as per drg. enclose)moc -en8,code:- code:-04820502045-01, plan bearing for cerm, eerm, gdrm (as per drg. enclose)moc-en-8,code:-91604819842-01, horizontal shaft for cerm (assy. dimension l-12 400 mm) (1set = shaft nos. 1, 2, 3 & 4, sleeves- 3 nos. set ring-2 nos., key-01 no.)shaft moc en8d, sleeve & set ring moc sa 106 key moc is 2062, code:-05506200046-01, horizontal shaft for cerm (assy. dimension l-11, 200 mm) (1set = shaft nos. 1, 2, 3, sleeves -2 nos.., set ring-2 nos., key-01 no.), shaft moc en8d, sleeve & set ring moc sa 106 key moc is 2062, code:-05506200059-01, horizontal shaft for gdrm (assy. dimension l-11, 875 mm), (1 set = shaft nos. 1, 2, 3 & 4, sleeves - 3 nos. set ring-2 nos., key-01 no.), sleeve & set ring moc sa 106 key moc is 2062) ,code:-05506200073-01, horizontal shaft for eerm (1 set = shaft no.- 1, 2, & 3, sleeve- 02 nos., key-01 no.,),shaft moc en8d, sleeve & set ring moc sa 106, key moc is 2062, code:-05506200085-01, vertical shaft for eerm (1 set = shaft no.- 1 with coupling, shaft no. 2 & 3, -2 nos.sleeve- 02 nos., key-01 no.,)shaft moc en8d,sleeve moc sa 106,key moc is 2062, code:-05506200061-01, vertical bush bearing, code:-91604817760-01, shock pad , moc en8d , code:-45205111062-01, pin wheel 2nd for eerm with key (pin moc-en36b), bearing no. 1211k with sleeve,make:skf/fag/timkan/nbc/aec/nsk or equivalent., pin wheel 1st for eerm with key (pin moc-en36b),, grip coupling for eerm (1 set=2 nos.), thrust bearing with fasteners (grade 8.8 & above), thrust pad with fasteners (grade 8.8 & above), shim pad/ plate for collection plate, clamp for sock bar of cerm, sleeve for rapping shaft, set ring for rapping shaft, coupling for cerm (shaft side), esp hopper door, cap for bush bearing of eerm shaft, buffele plate for esp hopper, liner for esp hopper (for corner area), carbon bush for eerm gear box, vertical bush bearing foe eerm shaft (complete assembly) as per drg., key for coupling of horizontal shaft (cerm), key for coupling of horizontal shaft (eerm), key for coupling of horizontal shaft (gdrm), key for coupling of vertical shaft(eerm), h.t. grade 10.9 of size m 16 x 70mm (1 set consist of following) material code 71304816994-01a) h.t. grade 10.9, hex head cap bolt, half thread m 16 x 70mm= 1 nos.b) h.t. grade 10.9, nut, m16 = 1 nos.c) h.t. grade 10.9, lock nut, m16 = 1 nos.d) h.t. disc washer, (conical washer) of thickness 2mm suitable for above bolt, = 3 nos.

State Government

CTN :38581545

20 Dec, 2024 5.72 Lacs

Bellary - Karnataka

Tender For clearing and cleaning of rat hole inside the esp hoppers of unit 2 ahp during shutdown/overhauling at btps

Central Government/Public Sector

CTN :38544551

18 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For ash level indicators and its spares for esp hoppers for tanda

corporations/Associations/Others

CTN :38167336

24 Dec, 2024 NA

Sonbhadra - Uttar Pradesh

Tender For corrigendum : maintenance work mechanical, electrical and c and i of complete ash handling system including operation and maintenance of furnace bottom ash disposal system and awrs system. with dfa, btps, obra.

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others