Bus Bar Tenders

Central Government/Public Sector

CTN :38771459

21 Jan, 2025 NA

Mandya - Karnataka

Tender For supply of physics screw driver set, soldering wire 100 gms, soldering gun 25 watts, soldering wax paste 30 gms, wire dcc 15 mtrs coil of 100 gms 22 swg, thread roll, drawing pins bush pin type pkt of 50 nos, ohms law apparatus with built in dc power supply model 651, voltmeter with desk stand rectangular dc 10 bolts, ammeter with desk stand rectangular dc 1 amps, ammeter with desk stand rectangular dc 3 amps, galvanometer 30 hyphen 0 hyphen 30 dc with mount moving coil 20 ua, resistance box magnin coil 1 hyphen 500 ohms 1 by 2 blocks a , resistance bix magnin coil 10000 ohms 1 by 2 block a grade export quality, lens convex 2 5 cms fl hyphen 10 cms, lens concave 2 5 cms fl hyphen 10 cms, mirror convex 2 50 mm focal length 10 export quality, mirror concave 2 50 mm focal length 10 export quality, pn junction diode semi conductor diode characteristic appt mtrs, battery elimnator 2 hyphen 12 volts 2 amps dc rotary type heavy duty , rheostat 200 mm 55 ohms 1 point 8 amps square rod export quality, rheostat 200 mm 135 ohms 1 point 2 hyphen amps square rod export quality, wheat stone bridge meter bridge 18 mm wooden bed copper , magnet bar alnico 50 mm extra strength parco type export quality, magnet horse shoe alnico 50 mm 2inches superior quality, magnetic compass both side glass 19 mm, lens reading magnifier with bakelite handle brass frame 75 mm 3 fl 20 superior quality, battery cell 9 volts hyphen 6f22 square, battery cell 1 point 5 volts hyphen c size eveready, battery cell 1 point 5 volts hyphen aaa duracell , led different colours red green yellow and white, iron metal filings cp 100 gm, multimeter analog, resistance coil 5 ohms magnin coil a grade, resistance coil 10 ohms magnin coil a grade, l d r different colours, plug key 1 way heavy superior, wire nichorme 100 gms, wire eureka constantan 26 g 100 gms approx 50 mtrs

Central Government/Public Sector

CTN :38844709

13 Jan, 2025 NA

Kanpur - Uttar Pradesh

Tender For design, fabrication & supply , installation of battery charging box panel suitable for operation of 110 vdc system. panel shall have 2.0mm /1.6mm sheet steel thickness. panel will be wall mounting typ e having provision for cable entry from bottom and suitable for indoor/outdoor installation. the panel will b e non- extensible type in design with dust and vermin proofing. the bus bars shall be of high conductivity e lectrical aluminum (al) flats as per requirement and shall be supported on smc/dmc supports of suitable si ze. bus bars will be insulated with heat shrinkable sleeves and codified in red and black colour as per stand ard practice. main bus bar & mcb rated current - 63 amp. dp. as per attached drawing. [ warranty period : 30 months after the date of delivery ]

State Government

CTN :38841400

10 Jan, 2025 36.77 Lacs

Delhi - Delhi

Tender For annual repair and maintenance of pwd roads under sub division-3 of division c and nd- roads during 2024-25. (sh - repair and maintenance of service road and pitching along service road of ring road opposite rajghat bus depot (area between geeta colony bridge to ito barra

Central Government/Public Sector

CTN :38653648

09 Jan, 2025 NA

Koriya - Chhattisgarh

Tender For corrigendum : supply of spares for kirloskar make pump - pump shaft 6 stage aisi 316 rkb12527k6aisi316180 , stage casing cf 8m rkb12527kcf8m124 , enclosed impeller cf 8m rkb12527kcf8m151 , diffuser cf 8m rkb12527kcf8m128 , bearing housing ci rkb12527kci240 , bearing housing nde ms rkb12527kms2401 , distance sleeve aisi 316 rkb12527kaisi316317 , washer for de c 20 rkb12527kc20209 , adjustable washer nde c 20 rkb12527kc202091 , set of keys 5 stage aisi 316 rkb12527k5aisi316ssok1 , bearing lock nut c 20 rkb12527kc20336 , set of tie bars with nut and washer 5 stage c 40 rkb12527k5c40ssot1 , oil seal de nde rubber rkb12527krubber500 , lock washer cs rkb12527kcs415 , hex socket groub screw steel rkb12527ksteel986 , shaft sleeve suc side aisi 316 rkb12527kaisi316310 , shaft sleeve del side aisi 316 rkb12527kaisi316311 , compression spring steel rkb12527ksteel483 , set of o ring 5 stage rubber rkb12527k5rubberssor1 , pump shaft 5 stage aisi 316 rkb12527k5aisi316180 , wear ring suc side cf 8m rkb12527kcf8m190 , wear ring del side cf 8m rkb12527kcf8m191 , inter stage bush for dwgv cf 8m rkb12527kcf8m355 , round lock nut c20 rkb12527kc203361 , lantern ring cf 8m shm6532nqcf8m227 , round lock nut bearing lock nut c 20 shm6532nqc20336 , pump shaft aisi 316 shm6532nqaisi316180 , shaft sleeve aisi 316 shm6532nqaisi316311 , semi open impeller q type cf 8m shm6532nqcf8m151 , bearing cartridge ci shm6532nqci241 , stuffing box bush aisi 316 shm6532nqaisi316350 , helicoil insert ss shm6532nqss479 , split gland cf 8m shm6532nqcf8m229 , set of oil seal rubber shm6532nqrubberssos1 , bearing housing ci shm6532nqci240 , set of key aisi 316 shm6532nqaisi316ssok1 , screw for impeller aisi 316 shm6532nqaisi316669 , spacer for cartridge ci shm6532nqci209 , internal circlip for bearing cartridge spring st is 4072-80c6 , bearing cover ci shm6532nqci271

corporations/Associations/Others

CTN :38845658

14 Jan, 2025 NA

Kolkata - West Bengal

Tender For repairing with replacement of burnt out spare parts of motor starter panel including auto transformer and busbar panel of 400 amp ocb incomer side of pump unit no.8 at ultadanga drainage pumping station.

Central Government/Public Sector

CTN :38820752

14 Jan, 2025 NA

Bangalore - Karnataka

Tender For supply of copper wire 1.0 mm p/n 2033491503-21 , copper wire 0.8 mm p/n 2033491501-27 , copper bus bar 2000 x 21 x 82 mm p/n 2500030030-59

Central Government/Public Sector

CTN :38840545

18 Jan, 2025 NA

Dhanbad - Jharkhand

Tender For repairing of 400amp, 3.3kv mineline make vcb with busbar serial no sa1210 ctr-400/s of 7 no substation under kocp.

Central Government/Public Sector

CTN :38840613

18 Jan, 2025 NA

Dhanbad - Jharkhand

Tender For repairing of 1200 amp ocb switch with busbar make gec 440v-550v, type ctr 400-800/5a controlling to power transformer secondary switch of simlabahal 4 pit colliery.

Central Government/Public Sector

CTN :38832736

16 Jan, 2025 19.94 Lacs

Angul - Odisha

Tender For supply of resistor as,part no-1353311 , pin,part no-1511215 , breather,part no-1577911 , ring set,part no-3803472 , pin,part no-4339379 , cover,part no-5d1902 , ring seal,part no-7i1352 , ring wear,part no-8c5245 , mount as,part no-9w9930 , bushing,part no-4j6374 , coupling,part no-3215693 , coupling rh,part no- 3215694 , washer special,part no-2342503 , tube as,part no-3273935 , clamp-t bolt,part no-2126934 , bus bar,part no-3989400 , bus bar,part no-3989401 , bus bar,part no-3575020 , valve gp-relief,part no- 2234434 , tube,part no-3833492 , diode,part no- 3521145 , resistor,part no-3634995 , resistor,part no-3634996 , valve-check,part no-1111460 , coil as- evaporator,part no-3697658 , valve gp- accumulator charging,part no-4921948 , accumulator gp-hydraulic,part no-3510320 , strainer,part no-2480363 , grommet,part no-3404192 , tube,part no-2678575 , seal 1.5 m,part no-5p5672 , seal,part no-5p5930 , seal,part no-3028935 , seal,part no-3029104 , seal,part no-3029140 , gasket,part no-3030955 , seal,part no-3031297 , air cleaner gp,part no-3080855 , coupling,part no- 5901978 , bolt-12 point head 5 by 8-11x1.75-in,part no-1762543 , pedal gp-governor,part no-5961139 , valve gp-solenoid,part no-5457861 , seal,part no- 6222369 , coupling,part no-5901980 , seal,part no- 6222367 , pump gp-fuel priming,part no-4672659 , tube as,part no-3789967 , handle as,part no-2521862 , gasket,part no-2521863 , bracket,part no-3765502 , plate,part no-2790941 , spacer,part no-2853692 , locknut,part no-0310249 , knob,part no-8y6974 , seal-o-ring,part no-2069295 , bar-bus,part no- 3303356 bid details/ 2 / 53

State Government

CTN :38834658

13 Jan, 2025 4.00 Lacs

Jodhpur - Rajasthan

Tender For electrical material supply and fixing work at various sites of jai narayan vyas university - ???????? ????? ????????????? ?? ??????? ?????? ?? ????? ??????? ??????? ??? ???????? ????? - supplying and drawing fr pvc insulated & unsheathed flexible copper conduct as per pwd specification for electrical works with isi marked (is:694) and as p is 8130: 2013 of 1.1 kv grade. wire should be made from 99.90% purity coppe class 5 stranding in acc. to is:8130/iec 60228 for lower watt loss, oxygen free f less chances of oxidization, insulation pvc type a/c/d, flame retardant as per 10810-53, better amperage rating as per is:3961 part 5, in existing surface recessed pvc/ms conduit/casing capping making connections with copper lugs suitable size, ferrules, testing etc. as required. oem must have its own in hou nabl lab setup for all testing facilities for wires. for additional technic parameters of product/work refer annexure 'a' attached with this bsr 1 x 2.5 sq.mm , supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pv insulated flat twin core sheathed solid aluminium conductor with 10 swg g support wire duly clipped etc. as required. for additional technical parameters product/work refer annexure 'a' attached with this bsr 10.0 sq.mm , providing & fixing of iso certified company made bakelite fuse fitting for hb fuse links (front/bus bar connections) conforms to is 13703/iec 269 w/o hb fuses as per pwd specification for electrical works on existing board includin making connections with lugs, testing etc. as required. appropriate type te certificate / oem test report shall be submitted. all as per pre approved engineer in charge. for additional technical parameters of products/work, ref annexure "a" attached with this bsr. 100/125 a rating , supply and erection of galvanized iron pole with galvanizing done in sing dipping (average coating thickness minimum 65 microns) continuously tapere poles having octagonal / circular cross-sections designed to withstand t maximum wind speed as per is 875. the pole shaft shall be made from sheet ste (ht steel conforming to grade s355jo) and confirming to bsen 10025 and sha be continuously tapered with single longitudinal welding. there shall not be am circumferential welding. the welding of pole shaft shall be done by submerged a welding (saw) process. pole shafts shall be provided with the rigid flange plate suitable thickness (fe 410 conforming to is 226/is 2062) with provision for fixin 4 no. foundation bolts. this base plate shall be fillet welded to the pole shaft at tw locations i.e. from inside and outside. the octagonal poles shall have lockable do of approximate 500 mm length at the elevation of 500 mm from the base plate wi bakelite sheet having 6a sp mcb and 16 sqmm stud type connector (4 nos) insis the pole at door opening for cable connection of following length and dimension per table p-01 with base plate and foundation bolt on the existing cement concre foundation all as per pre approved by engineer in charge. for additional technic parameters of products/work, refer annexure "a" attached with this bsr. poles with octagonal cross section 7 mtr. , providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover) toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each. the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety. power factor >0.95 driver efficiency >85% thd(1) <10% humidity 10% to 90% rh working temp -5c to 45c driver current <750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with m

By Cities

By States

By Agencies

By Ownerships

By Sectors