Chemical Scrap Tenders

CTN :43016441

17 Dec, 2025 36.81 Lacs

Khurja - Uttar Pradesh

Tender For tender for supply of spare parts of belt scrappers and skirt sealing arrangement c c - scrapper blade model-cps 300 width-300 mm for unidirectional belt conveyor , scrapper blade model-cps 300 width-200 mm for unidirectional belt conveyor , scrapper blade model-cps 150 width-300 mm for unidirectional belt conveyor , scrapper blade model-cps 150 width-200 mm for unidirectional belt conveyor , secondary scraper tungsten carbide (tc) cleaner blades model-cms 200 width-200 mm for unidirectional belt conveyor , secondary scraper tungsten carbide (tc) cleaner blades model-crs 200 width-200 mm for bi-directional belt conveyor , tip holder for secondary scraper , side skirt rubber block csb-200 , side skirt rubber block csb-150 , back skirt sealing rubber block model bes-150

Central Government/Public Sector

CTN :42989339

08 Dec, 2025 19.89 Lacs

Visakhapatnam - Andhra Pradesh

Tender For regular maintenance and overhauling of bowl mills of tpp boilers --, servicing of gearbox as per sl.no.1.01.01 το 1.01.04 of scope of work, servicing of worm shaft as per 1.02.01 of scope of work, replacement/reversal of worm wheel & worm shaft as per sl.no.1.04.01 of sow, repair of mechanical face seal as per 1.05.01 of scope of work, repair of skirt & scrapper as per 1.06.01 of scope of work, repair of roller assemblies as per 1.07.01 of scope of work, replacement of journal as assemblies as per 1.08.01 of scope of work, replacement of bull ring segment as per sl.no 1.09.01 of scope of work, repair of mill discharge valve as per sl.no.1.10.01 of scope of work, repair of classifier as per 1.11.01of scope of work, repair/replacement of vane wheel segment as per 1.12.01 of scope of work, repair of reject hoppers and discharge gates as per scope of work 1.13.01, repair of pf bends as per 1.14.01 of scope of work, repair of p.f.pipelines, bends etc.by welding as per 1.15.01 of scope of work, replacement of victualic coupling as per 1.16.01 of scope of work, multiport outlets repair as per sl.no.1.17.1 of scope of work, repair of orifice plates as per sl.no.1.18.01 of scope of work, bowl mill area cleaning as per scope of work sl.no.1.20.01, replacement of upper radial bearing and associated works of bowl mill as per scope of work 1.23.01 το 1.23.21, replacement of ventury assembly as per scope of work 1.24.00, replacement of feed pipe as per scope of work 1.25.00, servicing of mill reject conveyors idlers as per scope of work s.no 2.01.01 το 2.01.08, servicing of mill reject conveyors return idlers as per scope of work s.no 2.02.01 το 2.02.08, replacement of inner cone as per sow s. no 5.01.00, hard facing of bowl extension ring, vane wheel segment and separator body as per sow s. no 5.02.00, servicing of pyrite hopper power cylinder as per sow s. no 5.03.00, servicing of lube oil system as per sow s. no 5.04.00, servicing of volumetric feeder as per sow s. no 6.01.00, servicing of eddy current drive gear box as per sow s. no 6.02.00, general maintenance of boiler-6 bowl mills & lube oil system, roller setting of boiler-6 bowl mill, replacement of venturi collar of boiler-6 bowl mills, replacement/resetting of gasket of victaulic coupling or feed pipe sleeve coupling (per coupling) of boiler-6 bowl mills, servicing, replacement and setting of classifier deflector blade mechanism (per mill) of boiler-6 bowl mills, replacement & servicing of journal spring assembly (per assembly) of boiler-6 bowl mills, checking & setting of spring compression (per mill) of boiler-6 bowl mills, replacement of journal assembly (per assembly) of boiler-6 bowl mills, servicing of journal assembly with journal head liner assy (per assembly) of boiler-6 bowl mills, replacement of grinding roll and its support bracket or replacement of dirty oil from journal assy of boiler-6 bowl mills, replacement of vane wheel segment assembly/air inlet arrangement (per mill) of boiler-6 bowl mills., replacement of gear or bibby coupling half of boiler-6 bowl mills, alignment of mill & motor of boiler-6 bowl mills, servicing & replacement of lube oil pump of boiler-6 bowl mills, repl. of w.s. gland packing or replacement of cooling water hoses or pyrite hopper gate problem or alignment of lop or servicing of stuffing box de/nde of cad/had or servicing of any one valve of mill lube oil lines or mrhs air valve or air receiver tank drain tap or inspection of any one pf pipe hanger or, cleaning of any one hag or cag seat of boiler-6 bowl mills., general maintenance of gravimetric feeder of boiler-6, inspection/replacement of bearings of main tail pulley, intermediate rolls & main pulley of gravimetric feeder of boiler-6, replacement of feeder belt of gravimetric feeder of boiler-6, replacement of take up screw and screw housing of take up pulley assembly of gravimetric feeder of boiler-6, replacement of belt drive reducer of gravimetric feed

CTN :42954494

18 Dec, 2025 NA

Gandhidham - Gujarat

Tender For supply of items for general maintenance of main lights at bural, chank, kalumbhar and mungra reef - supply of vrla, smf battery 12v, 100ah reputed brand kalubhar 2nos. bural 3nos chank -2nos. mungra reef 2nos. total quantity - 9nos., supply of mnre approved solar panel 12v, 100w/125w reputed brand, supply of mppt charge controller 12v, 20a/40a reputed brand, supply of gi solar panel stand to withstand in marine weather condition for 100w/125w solar panel, supply of battery-operated drill machine along with battery and stand, supply of true rms, hand held clamp meter along with battery, supply of disc tumbler padlock (dtp)/disc lock min 70mm or above, supply of 2.5sq.mm x 2 c copper flexible sheathed wire, supply of metal primer for battery box cum pedestal, racon trestle and railing, supply of synthetic enamel metal paint, bus green for battery box cum, pedestal, racon trestle and railing, supply of thinner for painting work/washing brush, miscellaneous material for maintenance:, paint brush 2 inch-4nos and 3 inch-4nos, lug 4-6-1pkt (100nos.), pint type lug 2.5sq.mm-1pkt (100nos.), 6mm, 8mm sleave - 6m each, 25mm steet corrugated flexible pipe -30m., silicon sealant-4 and caulking gun 1no., pvc insulation tape -10nos., m6 x 25mm hex head bolt with nut & washer zinc-coated-30nos., hexagonal bolt with nut & washer 10mmx50mm(5cm)-15nos., cotton waste 1kg, assorted size of screw and pvc raval plug - 1pkt each, cotton tape-2nos., rechargeable led torch-1no., grease 1/2kg, l type paint scrapper 60mm/70mm-3nos, potable water 20lit with can-3nos, hack saw blade - 3nos., 4inch bosch metal cutter-6nos, white spray paint 400ml - 2nos, welding rod 3.15x350mm mild steel welding electrode rod, drill bit 13 pcs set hss-r-1 set (preferred make: bosch, makita, taparia), cement/sand/aggregate, ratio 1:2:4 bag for footing structure

Central Government/Public Sector

CTN :42887331

20 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including

corporations/Associations/Others

CTN :42880198

08 Dec, 2025 NA

Raigad - Maharashtra

Tender For auction sale of brm holding tank 1 kl,bcr wash tank 5 kl,phase separator 100 l (1 no.),fresh butanol intermediate tank 2.5 kl (2 nos ),light cut tank 500 l,recovered butanol collection tank 600 l (2 ea),crude butanol tank 2.5 kl (1 no),recovered butanol intermediate tank 1.2 & 1.6 kl(2 nos),residue distillation vessel 1.25 kl,residue butanol collection tank 1.6 kl,condenser for ev 401 hta 11.4 sqm,butachlor chilling tank 1 kl (4 nos),hot water tank 1.5 kl,aqueous mma batch tank 750 l,ipa batch tank 1.25 kl,dce batch tank 0.75 kl,mmacl batch tank,mcp pre mixer 3 kl,ipa recovery condenser 27 m2 hta,caustic solution batch tank 0.75 kl,caustic batch tank 0.75 kl,solvent collection tank (1.6 kl),caustic solution preparation vessel with motor 1 kl,two stage steam ejector 101a,atfe,atfe preheater,solvent condenser for ev 101 hta 4.43 sqm (2 nos),ejector for atfe,dehydration & toxification vessel 2 kl,recovered dce + water collection tank (1.6 kl)

corporations/Associations/Others

CTN :42857990

06 Dec, 2025 NA

Kolar - Karnataka

Tender For auction sale of scrap / condemned beml vehicle bp70 pipe layer in dismantled condition,scrap condemned beml vehicle bs42 snow cutter in dismantled condition,scrap / condemned beml vehicle bl15-lhd in dismantled condition,used / damaged / scrap / condemned / broken hss hacksaw / slitting saw blades,used / damaged / scrap / condemned vernier caliper,used / damaged / scrap / condemned height gauges,used / wornout / damaged / scrap / condemned / broken plain / thread gauges,used / wornout / damaged / scrap / condemned / broken hss tools and cutters,used scrap condemned broken hss drill bits reamers taps,used / damaged / scrap / condemned / broken steel measuring tapes,used / scrap / condemned hardness testing machines,used / damaged / scrap / condemned / broken tungsten carbide lugged gun drills,used scrap condemned brazed facing and turning tools with steel body,used / damaged / scrap / condemned / broken spanners, chuck nuts, sockets,used / damaged / scrap / condemned / broken carbide tipped dead centres,used / damaged / scrap / condemned / broken gear hobs,used / damaged / scrap / condemned / broken broches,used scrap condemned brazed carbide tipped and insert type microbore catridges,used scrap condemned thread cutting insert type ms tool holders,scrap brass wire which was used in wire cutting machine,used / scrap / condemned mini-drafters,used / condenmed lockes with or without key/s,used / damaged metal detectors,used / condemned various brass items,used / condemned brass water taps,scrap copper turning boring chips,used scrap small casting forging bushes,scrap ms pallets,condemned / scrap machines,rusted welding coils,scrap gears,scrap / used scrap stainless steel canteen utensils,used / damaged electrical items,scrap / condenmed parts of transport vehicles,scrap / used steel rope,scrap / condemned solar panel boards,scrap / used holders of co2 welding machine torches,scrap high percentage nickel chromium charge trays,used / scrap / condemned parts of over head cranes,used scrap ms stands,scrap m.s. turning and boring chips,m.s. melting scrap - cut pieces,scrap control panel board,used, damaged light fittings,scrap bolts nuts washers,condemned / scrap radiators,end bits of steel rods and pipes,used scrap heavy castings forgings,scrap electric motors,used scrap ms items,scrap plastic welding spools,scrap / used hand gloves,scrap / used x-ray films,used scrap miscellaneous belts, masks, shields, hoses, etc.,used / scrap batteries

Central Government/Public Sector

CTN :42843636

11 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of alh-gse-ahcp-cg - ahcp kit for cg-, glass measuring cylinder 250ml, handheld maginifying glass 3x , 10x, sample bottle glasses 250ml, inspection mirror dia 2inch , trichloroethylene (for cleaning of electrical connections), mek (merk), acetone (merk), lead lamp with cable 7mtr, petroleum jelly px-7, alodine, tack cloth / lint free cloth, glycerin, teflon tape, adhesive tape 38mm, knife (stainless steel), scissor, torch led (2 cell type ‘a’), scotch bright pad , hand gloves pvc electric resistant , emery 180, sand paper fine, hand gloves cotton, molykote grease, anti-corrosion fluid spray, hand spray 340 gm, corrosion preventive spray, silicon adhesive, wax polish liquid, metal conditioner, teepol / labklin, anticorrosive spray, wind shield washing liquid, white spirit, electrical grinder, aluminum box (powder coated), paint grey pu paint, paint oxford blue, paint p/o red pu paint, paint white pu paint, paint black pu paint, epoxy primer, paint remover, stainless steel cups , goggles poly carbon, wooden scraper, metallic scriber, spray gun (metallic), grinding accessories (40, 120, 240, 360, 400 and 600 size), copper wire brush fine 1 inch, brush bristle 1 inch, brush hard nylon 1 inch, brush paint bristle 1 inch, brush paint bristle ½ inch, brush pencil writing, polishing cloth, paper sponge cloth, paper abrasive water proof, multifunctional fluid spray, thinner universal, paint golden yellow, paint red orange, paint non-skid black, heat resisting aluminum paint, paint silver grey, potassium dichromate, dye penetrant kit

CTN :42809264

03 Dec, 2025 91.75 Lacs

Khurja - Uttar Pradesh

Tender For tender for supply of qlar make spare parts of gravimetric coal feeders d d - belt drive assy (without geared motor) , coc drive assy (without geared motor) , belt take up assy , coc take up assembly , weigh sensing assy (without loadcells) , roller weigh span assy , roller assy weigh span with cmmr , weldment weigh roller , inlet support roller group , drag link assembly - lh & rh , belt scrapper , feeder belt , coc chain assy , coupling for coc drive , dual magnetic sensor assy iec 132 , coal on belt switch assy , discharge paddle switch assy , speed sensor only for dual tacho , seal-oil for weigh span roller , seal-oil- take up assy , housing-belt take up , screw-take up , spring guide , spring , seal -take-up assembly coc , seal -take-up assembly coc , screw-take up for coc , drive block for coc take up , head pulley bushing , belt take up pulley bearing , weigh span roller bearing , inlet span roller bearing , chain take up bearing , coal on belt bearing , test weight group assembly-rh , test weight group assembly-lh , shaft & pinion weldmnt b.o.v , s13185-001 , roller group b.o.v 1000mm b14144-001 , roller group b.o.v 1000mm b14144-002 , gear reducer 6 ratio 1 assy(metric)-s16041-001 , end bearing gp b.o.v 1000mm ib14224-001 , belt drive motor , 5.5kw , coc drive motor , 0.37kw , belt motion monitor (zero speed sensor / switch)

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector