Construction Machinery Tenders

Get complete information related to latest Construction Machinery Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Construction Machinery Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Construction Machinery Tenders .

Filter

Loading....

Get Tender in Email

CTN :43943212

20 Feb, 2026 NA

Firozpur - Punjab

Tender For supply of solar road studs (q2) , aluminum door closer hydraulic regulated designation no 1 universal type comma shutters up to 700mm in width and of weight not more than 35 kgs and fixed isi marked , aluminum anodise hydrolic door closure regulated desination number 02 weight between 36 to 60 kg isi marked , bitumen road patch pack of 25 kg isi marked , mortise door lock and handle set 200mm oblique 8 inch isi marked , pad lock brass 7 levers comma 65mm comma 4 keys isi marked , helical door spring closer ms 300mm including roller and roller plate isi marked , helical door spring closer ms 150mm isi marked , sliding bolt aluminum 250 mm with hasp and staple isi marked , sliding bolt aluminum 300 mm with hasp and staple isi marked , aluminium door handle 150mm isi marked , aluminium door handle 125mm isi marked , aluminium door handle 100mm isi marked , butt hinges alumn pressed 100mm isi marked , butt hinges alumn pressed 75mm isi marked , ms butt hinges 100mm isi marked , continous piano hinges 30mm , hasp and staple alumn 100mm isi marked , hasp and staple alumn 75mm isi marked , aluminium tower bolt 200mm with stapple isi mark , aluminium tower bolt 150mm with stapple isi mark , aluminium tower bolt 100mm with stapple isi mark , aluminium door stopper double leg isi marked , aluminium door stopper single leg isi marked , bracket ss for 20mm curtain rod isi marked , cpvc pipe 50mm , cpvc pipe 32mm , cpvc pipe 20mm , cpvc pipe 15mm , cpvc 15mm male brass threaded adapter , cpvc 15mm brass tee , cpvc 15mm female brass threaded adapter , cpvc 15mm brass elbow , cpvc 32mm brass elbow , cpvc 20mm brass tee , cpvc 32mm brass tee , cpvc 20mm brass elbow , cpvc 15mm tank adapter , cpvc 15mm union , upvc butterfly valve 160 mm , upvc butterfly valve 110 mm , upvc foot valve 160 mm , upvc union 110 mm , spindle for sluice valve 150mm , nrv 100 mm , nrv 80 mm , self closing hinges 100mm , self closing hinges 75mm , aluminium plain sheet 22 gauge 4 feet wide isi marked , wall mixer brass leg 15mm , cp bib tap handle , magnetic catcher , ptmt tower bolt 200mm isi marked , ptmt handle 125mm isi marked , ptmt hinges 100mm isi marked , nut and bolt with washer 75mm x 6mm isi marked

Central Government/Public Sector

CTN :43921179

02 Mar, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of puc civil allied works : : - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1

State Government

CTN :43669573

13 Feb, 2026 2.24 Crore

Kota - Rajasthan

Tender For corrigendum : mdr 252 to fatehpurkhushk - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), kilometre stone reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 ordinary kil

Loading, Please wait...

Construction Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government