Construction Machinery Tenders

State Government

CTN :43061677

12 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

Central Government/Public Sector

CTN :43055147

15 Dec, 2025 3.31 Lacs

Dhanbad - Jharkhand

Tender For repairing of under carriage and boom bracket eve and piston rod hole and pin making of l and t 300 at abocp mines

Central Government And Public Sector

CTN :42648570

09 Dec, 2025 5.33 Crore

Katipala - Karnataka

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - tender for internal cleaning of crude oil storage tanks fb7001 & fb-7002 series for facilitating internal inspection as per oisd requirement by circulation using jet mixing, removing bottom sludge, sediments, residue etc & disposal after necessary processing and final cleaning using robotics

CTN :42788556

17 Nov, 2025 28.00 Lacs

Multi City - Telangana

Tender For corrigendum : procurement of spares for komatsu make d275a-5r model dozers d-351 and d-349 working at ocp3, rg2 on proprietary basis--, m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters , blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for long-wall salvage, manufacturing of supply of electrical coils for , ac motors up to 6.6 kv grade and transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc. (work should be carried out at the respective mine premises). , manufacturing of earth clams, g.i flats, g.i bolts and nuts., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors.

Corporations And Associations And Others

CTN :43027914

11 Dec, 2025 8.00 Lacs

Ambala - Haryana

Tender For expression of interest for preparation of detailed project report, tender documents for designing, detailed project report for construction of 10 mld water treatment works with complete automation and scada comprising of rcc inlet from kanwala minor, rcc storage & sedimentation tank, raw water pumping sump & pump house,water treatment plant comprising of stilling chamber, parshall flume or ventury flume, flash mixer for rapid mixing, clariflocculators for flocculation and settling swith sludge withdrawl, rapid gravity filters, chlorination, underground clear water tank, pump chamber and requisite pumping machinery, rising main from proposed s&s tank to wtp including cost of transformer, dg set, electrical, mechanical instrumentation works complete in all respect in sector – 24, urban estate ambala city.

State Government

CTN :42966383

09 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a

CTN :43019440

17 Dec, 2025 7.54 Lacs

Hukkeri - Karnataka

Tender For construction of a new kitchen shed at chikkaladinni government primary kannada school - corbon electrodes construction kich, aluminium window frame section 1.20 mm thick kitchen shed, unit cost as per the specification kitchen shed, rms gusset plate kitchen shed, ms pipes of 80 mm to 100 mm dia kitchen shed, hom of welding and grinding machine kitchen shed, hom of cutting and grinding machine kitchen shed, mechanic class ii/mechanic hmp grade i/eme grade kitchen shed, soildparticalboardflushdoors30mmthick gp, dry distemper kitchen shed gp, mason class ii (with tools) kitchen shed, cudddapah slab 4 cm thick/shahabad/thandur blue kitchen shed, rubber beading for shutters beading kitchen shed, pvc beading kitchen shed, alluminium tower bolt - 20 cm kitchen shed, alluminium handles - 15 mm kitchen shed, cleat angles kitchen shed, jungle wood runners and planks kichen shed, casurina poles 75 - 100 mm dia kichen shed, casurina poles 100 - 150 mm kichen shed, burnt bricks class 35 (non modular) kichen shed, broken stone aggregate 40 mm size kichen shed, broken stone aggregate 20 mm size kichen shed, broken stone aggregate 12 mm to 10 mm size kichen shed, bond stone 20 x 20 x 45 cm kichen shed, five poin five zeromm thick plain glass kichen shed, m.s rods kichen shed, binding wire kichen shed, plasticizer / super plasticizer kichen shed, vitrified tiles 600x600 mm kichen shed, ms flat kichen shed, mason class i (with tools) kichen shed, painter class i kichen shed, mixer (concrete) - 1 cum capacity kichen shed, mixer (concrete small used in culvert) kichen shed, welder grade i kichen shed, fabricator kichen shed, tmt bars fe 500 kichen shed, silver oak or equivalent planks 38 mm thick kichen shed, rubble stones kichen shed, mathi/nandi wood planks for panels 25 mm thick kichen shed, coarse sand (zone iii) kichen shed, portland cement kichen shed

CTN :43019442

17 Dec, 2025 6.98 Lacs

Hukkeri - Karnataka

Tender For construction of the new government school kitchen shed in gutaguddi - soildparticalboardflushdoors30mmthick gp, corbon electrodes pam01, plasticizer / super plasticizer kitchen shed, binding wire kitchen shed gp, tmt bars fe 500 kitchen shed gp, mason class i (with tools) kitchen shed, mixer (concrete small used in culvert) kitchen shed, bond stone 20 x 20 x 45 cm kitchen shed, rubble stones kitchen shedrustumpur, casurina poles 100 - 150 mm kitchen shed, jungle wood runners and planks kitchen shed rustumpur, silver oak or equivalent planks 38 mm thick kitchen shed rustumpur, mixer (concrete) - 1 cum capacity kitchen shed, portland cement kitchen shed gp rustumpur, coarse sand (zone iii) kitchen shed, broken stone aggregate 12 mm to 10 mm size gp rustumpur, broken stone aggregate 20 mm size kitchen shed gp, broken stone aggregate 40 mm size kitchen shed gp, fabricator kitchen shed, five mm thick plain glass kitchen shed, cleat angles kitchen shed, alluminium handles - 15 mm kitchen shed, alluminium tower bolt - 20 cm kitchen shed, pvc beading kitchen shed, rubber beading for shutters beading kitchen shed, add providing and removing scaffolding at 3% on labour gp41, painter class i kitchen shed, welder grade i kitchen shed gp, ms flat kitchen shed gp, m.s rods kitchen shed gp, glazed tiles 300x450 kitchen shed, vitrified tiles 600x600 mm kitchen shed, unit cost as per the specification kitchen shed, rms gusset plate kitchen shed, ms pipes of 80 mm to 100 mm dia kitchen shed, hom of welding and grinding machine kitchen shed, hom of cutting and grinding machine kitchen shed, mechanic class ii/mechanic hmp grade i/eme grade kitchen shed, burnt bricks class 35 (non modular) gp kitchen shed sch, aluminium window frame section 1.20 mm thick kitchen shed, dry distemper kitchen shed gp, cudddapah slab 4 cm thick/shahabad/thandur blue kitchen shed, add cutting and other wastage 5% kitchen shed, mathi/nandi wood planks for panels 25 mm thick kitchen shed gp

CTN :43019297

10 Dec, 2025 6.66 Lacs

Jhansi - Uttar Pradesh

Tender For maintenance and repair work at in pharmacy building metal mineral lab, old office building, mini pharmacy building museum building, toilet block, nrdr building at cari jhansi (up) during 2024-25 sh construction of damaged boundary wall near main gate and near transformer at cari jhansi (u.p.)

CTN :42882895

08 Dec, 2025 NA

Bhojpur - Bihar

Tender For corrigendum : supply of building repair and maintenance at patna lpg plant : : -dismantling , providing 15 mm cement , providing and applying , providing and laying , providing and mixing , providing, laying , supplying and drawing , supplying , providing and fixing , supply, installation, , supply and fixing , providing, laying, fixing , supplying and fixing , bld pnt acrylic , bld pnt pop , providing and erecting , bld pnt ext , terrace water proof

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

Corporations And Associations And Others

State Government