Tender For empanelment of agencies for supply of different laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoride & nitratemeter: ph/ion/ mv-redox-orp/ temperature benchtop meter with electrode for testing both fluoride & nitrate separately in water samples. technical specification: ph range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 accuracy 0.002 ph + 1 lsd calibration points up to 5 buffer sets: usa/ nist/ din/ custom orp range 2000.0 mv rel. mv range 2000.0 mv accuracy 0.2 mv resolution 0.1 mv ion concentration 0.001 to 19999 ppm resolution up to 3 digits relative accuracy 0.5 % full scale (monovalent) and 1 % full scale (divalent) calibration points up to 8 temperature range 0 to 100 c, 32 to 212 f resolution 0.1 accuracy 0.3 c/ 0.5 f compensation: auromatic temperature correction other requirement: auto buffer recognition, memory 500 with time and date stamp rs 232 alarm for calibration due & out of range alurm auto logging function., fluoride electrode of ion metersame make that of the ion meter, nitrate electrode of ion metersame make that of the ion meter, manifold filtration assembly (to be used for micobiological test)* sturdy and easy to clean ss filtration assembly with funnel, manifold unit, air vent filter and vaccum pump ready to be used for mictobiological testing * specification: # funnel with inbuilt clamp: made of ss 316, capacity: 300 ml, ss filter support base, ss support screan: 47 mm, made of ss 316l; filtration area 9.6 cm2; silicon stopper: size 8, with silicon lid and silicon o ring. # filtration manifold: 3 place manifold, made of ss 316, valves made of ptee, connection 12 mm; suitable for both pp and ss funnel with rubber stopper fittings. # vacuum pump: oil free, piston powered, suitable to be used with 3 possition manifold; max flow rate: 34 l/ min; vaccum stage: double. max vaccum: 100 mbar. the vaccum pump should also have a vacuum suction bottle to protect the pumps componennt by preventing liquid or solid material from entering the pump during filtration process., voltage stabilizer (3 phase)# capacity- 3 kva # input voltage range: 295 v - 465 v normal range # output voltage range 380 v / 400 v / 415 v # output regulation: 1 %; # output settability: 380 v - 420 v; # frequency: 47 hz - 53 hz; correction rate: 70 v/ sec; # aircooled servo stabilizer, three phase., heating mantle (single station) should have safety cut off with precise heating for boiling, evaporation, distillation or extraction process technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 350 degree celcius. accuracy: 1.0 degree celcius, display: led display with temperature, time; construction material: ms; power consumption : 150 w, semi automatic digestor for cod analysis with all assssories material of construction epoxy painted with chemical resistant coating; temperature range ambient to 450 deg c # stability of temperature 0.5 deg c # temperature calibration - automatic; selectable ramp: upto 4 per program; digestion time range: 1 to 999 minutes; time selection: 1 minutes steps; countdown: digital readout; heating places - 6 possition; size of tubes: 250 ml test tubes (42 mm); power 1000 w; number of programmable methods 20 numbers. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint., digital thermometer with probe# mini lcd thermometer # type: digital, # sensor cable length: 1 meter water proof probe # batteries: 2 x batteries should be included, # temperature range: - 50 - 110 oc, # temperature measurement accuracy: 1 0c, micropippete stand#self-standing holder accommodates most major brands of pipettes. #material: pmma, # capacity: 5 pipptes/stand, conical flask draining rack#material: acrylonitrile-butadiene-styrene/polycarbonate, # no. of pegs: 20
Tender For corrigendum : supply%2c erection%2c testing and commissioning of electro mechanical (eandm) system comprising of 33%2f11kv and 11%2f0%2e433kv gis substations%2c ht and lt cables%2c dg sets%2c lighting%2c ups system%2c ventilation systems and fire fightingsystems and otherassociated works for tunnels of rishikesh karnprayag new bg rail line project in the state of uttarakhand in 03 (three) packages%2e
Tender For provn of furniture for motorable road with watch tower and security lights alongwith perimeter fence to carry out patrolling by qrts at dholewal mil complex ludhiana - chair easy (fd-229), chair writing (fd/e6/map/12), charpoy ip hard top (fd/map-ii/01), fmn set (fd-221), table 3 x2 with drawer (fd-1008), locker steel (fd-1029), stool steel adjustable (fd-1026)
Tender For corrigendum : supply of spares required for ece make circuit breaker 3300 v and 6600 v indoor and outdoor type c c > f> f -fixed contact assembly 400a, part no. - bd4510 , arc control pot separator, part no. - ek6050876 , jaw contact assy set, part no. - bd4050 , guide pin small , part no. - pd3597 , shunt trip coil assembly, part no. - 1650ts , isolating spout assy with nylon shroud, part no. - bc9977 , shutter assy. bd5310, part no. - bd5310 , earthing bar contact, part no. - bd8810 , 3.3kv 400-630a troly with motor mchnsm, part no. - bd8271 , e-l rely, hvy dty, withlkg dsply, cbct, part no. - ea6641 , moving contact assembly, part no. - bd5551 , operating mechanism complete set, part no. - bd4911 , high speed tripping relay, part no. - ea6890 , ocb rasing and lowering handle, part no. - bd4718 , scm operting handle, part no. - bd5116 , scm operting handle, part no. - bd5999 , idmt relay complete with 2 over current, part no. - ea6561 , under and over voltage relay, part no. - ea6591 , earth leakage relay with cbct, part no. - ea5666610 , high speed tripping relay, part no. - ea5666890 , under and over voltage relay, part no. - ea5666591 , shunt trip coil assembly, part no. - 5661650t , idmt relay complete set with 2 over cur, part no. - ea5666561 , raising and lowering handle, part no. - bd5664718 , scm operating handle, part no. - bd5665116 , heavy duty trolley with motorised mechnism, part no. - bd5666271 , isolating spout assembly with nylon shro, part no. - bc5669977 , isolating spout asmbly with nylon shroud, part no. - od5669977 , shunt trip coil assembly, part no. - od5661650ts , earthing bar contact, part no. - od5668810 , under and over voltage relay, part no. - od5666591 , power pack unit 110v dc, part no. - od5665999 , heavy duty trolley with motorised mechnism, part no. - od5666271 , operating mechnism complete set, part no. - od5664911 , right angle cable end box withsuprt plt, part no. - od5667225 , outgoing cable box with sprt plt, part no. - od5667227 , elr withcurnt dsply systm and time lag, part no. - od5666610t , relay idmt, 2o-c plus 1e-f, 2no-2nc, part no. - od5666561 , high speed triping relay, part no. - od5666890 , raising and lowering handle, part no. - od5664718 //bid details 2 / 41
Tender For providing aviation light, earthing for tower body and lightning of 40 mtr gbt , service connection and ea set associated works for new od bts at maruproluvaripalem under guntur ba
Tender For corrigendum : supply of alternator, part no.voe15196041 , keyboard, part no.voe15118696 , gas spring, part no.voe11174619 , hexagon screw, part no.voe60114447 , fuel filter housing, part no.voe22035823 , filler pipe, part no.voe16290830 , fan hub, part no.voe22031832 , belt tensioner, part no.voe22950501 , belt tensioner, part no.voe21422767 , idler pulley, part no.voe21676635 , sealing kit, part no.voe11716047 , guide ring, part no.voe11107528 , bushing, part no.voe11088054 , heat exchanger, part no.voe11110903 , expansion tank, part no.voe22821822 , o ring, part no.voe11707766 , o ring, part no.voe11707767 , o ring, part no.voe3537507 , o ring, part no.voe6848760 , o ring, part no.voe3537521 , o ring, part no.voe3537499 , sealing kit, part no.voe15111059 , o ring, part no.voe15013818 , o ring, part no.voe982737 , o ring, part no.voe982736 , o ring, part no.voe993327 , pressure sensor, part no.voe21634017 , sensor, part no.voe22422785 , pressure sensor, part no.voe22899626 , oil level sensor, part no.voe11423761 , condenser, part no.voe16235278 , o ring, part no.voe925256 , sealing ring, part no.voe990757 , sealing ring, part no.voe990756 , o ring, part no.voe925072 , o ring, part no.voe925073 , o ring, part no.voe925271 , o ring, part no.voe967343 , o ring, part no.voe975664 , o ring, part no.voe976970 , o ring, part no.voe977030 , gasket, part no.voe977935 , o ring, part no.voe980998 , o ring, part no.voe990738 , o ring, part no.voe990739 , sealing kit, part no.voe15010254 , sealing kit, part no.voe15011881 , starter motor, part no.voe17233221 , accumulator, part no.voe17258321 , o ring, part no.voe993323 , hose, part no.voe13949315 , hose, part no.voe943367 , water hose, part no.voe16908141 , hose, part no.voe17224544 , hose assembly, part no.voe15023913 , hose, part no.voe969021 , rubber hose, part no.voe16652705 , charge air hose, part no.voe17247588 , charge air hose, part no.voe17247561 , charge air hose, part no.voe17247678 , water hose, part no.voe16861621 , hose, part no.voe945791 , hose, part no.voe15125473 , pipe line, part no.voe17454143 , hose assembly, part no.voe11445208 , hose assembly, part no.voe11431028 , hose assembly, part no.voe11445197 , coolant pipe, part no.voe16305668 , cooling hose, part no.voe16934894 , cooling hose, part no.voe16934871 , cooling hose, part no.voe16934864 , bushing, part no.voe15012455 , spacer, part no.voe11108458 , shim, part no.voe11177629 , sealing ring, part no.voe11177361 , pivot pin, part no.voe15043395 , bushing, part no.voe11177369 , pivot pin, part no.voe15097892 , flange screw, part no.voe60113126 , washer, part no.voe60113807 , spacer, part no.voe11177392 , washer, part no.voe11177362
Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng
Tender For construction of 3 nos. rcc g plus 6 storied housing project at dolabari, tezpur including approach road, earth filling, boundary wall, 630 kva substation, 160kva diesel generator set, underground water tank for firefighting, stp 15 kld, cctv etc.