Engine Alternator Set Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government / Public Sector

CTN :38570282

03 Jan, 2025 NA

Mumbai - Maharashtra

Tender For supply, installation, testing and commissioning of ht panel, transformers, dg sets, lt switchgears, cabling, lighting, earthing and allied works at grassroot petroleum storage terminal at mirzapur, uttar pradesh

Central Government/Public Sector

CTN :38604372

19 Dec, 2024 NA

Kanakapura - Karnataka

Tender For end wall complete npp end for pantry car of lhb amrit bharat coaches. no te:-(1)in drawings "mig welding (131) is to be read as tig welding (141)" as per design let ter no. md46231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufacturing. there may be minor modification in design to suit ralway requirement & modification to be carried out by firm at no further cost to railway., as per drawing: 981 15009 alt. '-r1', packing instruction: 1. the supplier shall pack the end wall in a suitably desi gned returnable fixture in such a way that end wall shall not get scratched, damage d, twisted during transportation, storage and lifting and to avoid scratches on oute r surface. it should be seperated by suitable environment friendly blocks to avaoid ru bbing of two endwall surfaces . it should have standard clamping /fastening mechanis m so that it can be opened easily. it should have firm's identification mark. 2. first retu ranable fixture along with end wall be retained by rcf & this fixture shall be exchang ed in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/fram e to be fabricated having sufficient strenght to bear approximate 2 tonne load in stati c & moving condition of two coach sets of end wall. 4. the fixture /frame/pallet shoul d be designed so that the packed end wall preferably remain in vertical position to min imize surface area. 5. it should also be suitable for storage of end wallunder open sky . [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38605297

19 Dec, 2024 NA

Kanakapura - Karnataka

Tender For end wall complete pp end for pantry car of lhb amrit bharat coaches. not e:-(1)in drawings "mig welding (131) is to be read as tig welding (141)" as per design lett er no. md46231 dated 16.03.2024. (2)firm shall collect all latest/final drawings before manufacturing. there may be minor modification in design to suit ralway requirement & modification to be carried out by firm at no furthercost to railway., as per drawing: 981 15010 alt. '-r1', packing instruction: 1. the supplier shall pack the end wall in a suitably des igned returnable fixture in such a way that end wall shall not get scratched, damage d, twisted during transportation, storage and lifting and to avoid scratches on oute r surface. it should be seperated by suitable environment friendly blocks to avaoid ru bbing of two endwall surfaces . it should have standard clamping /fastening mechanis m so that it can be opened easily. it should have firm's identification mark. 2. first retu ranable fixture along with end wall be retained by rcf & this fixture shall be exchang ed in the second lot supply and so on. at the end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/fram e to be fabricated having sufficient strenght to bear approximate 2 tonne load in stati c & moving condition of two coach sets of end wall. 4. the fixture /frame/pallet shoul d be designed so that the packed end wall preferably remain in vertical position to min imize surface area. 5. it should also be suitable for storage of end wallunder open sky . [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38572210

20 Dec, 2024 46.12 Lacs

Delhi - Delhi

Tender For maintenance and operation of dg sets, storm water pumps, substation and related electrical installation, lt panel board at storm water pump houses and dewatering pumps set at subways under pwd, emd south east, new delhi

State Government

CTN :38562257

18 Dec, 2024 1.10 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For randm/o water pump sets at various location under b/flat and w/gunj area under sd-ii, apwd w/gunj under eandm division, apwd, prothrapur 2024-25 sw re-winding of 100 hp / 75 kw, 3 phase, 415v, 50 hz induction motor installed at kamsarat dam

Central Government/Public Sector

CTN :38604323

26 Dec, 2024 NA

Thiruvananthapuram - Kerala

Tender For supply of avr(automatic voltage regulator)model no.mx321-mk2 as per stamford part no.e000-23212.required for 7 50v,500kva stamford make alternators of cummins diesel alternator set in high capacity power cars make:-stamf ord. [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :38583677

23 Dec, 2024 NA

Katihar - Bihar

Tender For supply of 5 kva single phase portable diesel genset, control panel-manual/amf, fuel tank capacity- 15 ltrs., engine model- kd441-gs12, type- direct injection, 4 stroke, bhp- 8.2, air cooled, starting system- 12v dc, 35 ah, alternator make- cropton, voltage- 230 volts, 50 hz.

Central Government/Public Sector

CTN :38556450

23 Dec, 2024 NA

Vellore - Tamil Nadu

Tender For tender for supply of spares for perkins dg set - rocker cover gasket p.no.se478f perkin , joint part no 8se70a , water pump assy part no t431180 , thermostat assy part no t430141 , joint part no 282/292 , metric bolt , part no- 503/293 , perkins , nut , part no 2076/3 , gland , part no- se652/5 , perkins. , gland seal o ring , part no- 576/148 , fuel pipe part no 8se427m , induction manifold part no se34s/1 , exhaust manifold part no se15ay , magnetic pick up , part no 680/124 , connector part no 680/200 , starter motor , part no.701/133 , alternator part no 702/186 , timing belt part no 541/398 perkins , switch part no 782/177 , pressure sensor part no 886/199 , sensor part no 886/192 , pressure switch part no 782/175 , temperature switch part 782/176 , solenoid part no 589/91 perkins , relay part no 2848a226 perkins , magnetic pick up p.no.838/14 perkins , switch part no 655/42

Central Government And Public Sector

CTN :38554816

23 Dec, 2024 NA

Damanjodi - Odisha

Tender For supply of e 106697 water sprinkler engine spares - 1 .62199001220 link alternator part no 3877827 , 2 .62199956540 element slo by pass 3873576 k2 , 3 .62199001950 link alternator 3229320 , 4 .62199133860 element lub oil filter 158139 by 3238204 , 5 .62199103070 compressor air part no. ar7944 , 6 .62199114780 o ring 137075 , 7 .71103021630 tube compressor 3235576 , 8 .62199168800 fuel filter element pt.no.256834. , 9 .71103002230 breather crank case 255180 , 10 .62199001990 lever throttle 3048296 , 11 .62199130810 gasket compact 0154018 , 12 .62199131790 gasket 154996 , 13 .62199000390 belt water pump 3058383 , 14 .62199113350 thermostat 0135675 , 15 .62199103080 gasket air compressor part no. 176027 , 16 .62199018600 fuel filter element ar 324739900 , 17 .62199103010 hose part no 217302 , 18 .71103021640 gasket 3076225 , 19 .62199003550 shut down valve assembly pt.no ar3239599 , 20 .71103021620 gasket 218027 , 21 .71103021610 gasket 3076228 , 22 .71103021670 seal rear crank 3001772 , 23 .62199001010 wp belt pt. no. 217638 , 24 .62199103050 fuel pump part no. 4056122 , 25 .62199000370 belt alternator 178489 , 26 .62199803770 belt fan 3236740 , 27 .62199001940 pulley 501253 , 28 .62199000660 water pumpand idler 3051371

By Cities

By States

By Agencies

By Ownerships

By Sectors