Hook Tenders

Central Government/Public Sector

CTN :40384299

07 Jun, 2025 NA

Amritsar - Punjab

Tender For supply of timing belt , assy delivery line firwl to prmg pump , engine oil filling cap , t map sensor boost pressure , ckp sensor cranck sensor , filter assy for power steering reserver , air filter , tapped gasket cover , gasket intake manifold , assy parking brake cable front acex , clip , assy parking brake cable rear rh acex , assy parking brake cable rear lh acex , assy brake shoe liner rear lh with rivet , assy brake shoe liner rear rh with rivet , retaining plate , d g ball bearing , belt power steering , assy set back leak hose , auto tensioner assy , rubber bush , cup front antiroll bar , assy link front anti roll bar , nyloc nut m-10 , assy front shock absorber lh , disel injector purge cleaner 1000 ml , clamp big size , idle arm brass bush , emery paper , anabond small , old cloth , araldite big size , fuse 20 amp , fuse 15 amp , brake light assy lh , bulb 1141 , bulb 1621 , relay 70 amp ignition r1 , relay 30 amp main r3 , relay 70 amp starter r6 , assy latch front door lh with sleeve actuater , assy front door lock unlock cable , pop up knob , side view mirror both side bid number/ & ( * ) : gem/2025/b/6243273 dated/ + : 17-05-2025 bid document/ 3 3 1 / 37

Corporations/Associations/Others

CTN :40418453

06 Jun, 2025 36.10 Lacs

Chikkodi - Karnataka

Tender For annual supply and repair motors of tmc chikkodi - motor 100hp starter oil, motor 100hp pump soot, nut bolt 6x3, starter oil, seal pipe pvc, site visit charges, gas welding, lathe work., gunmetal welding, gas cutting, welding, jcb., generator., check nutt, spandle, painting to jalkumb, errection and commissioning of transformers including connection of htand lt side earth connections etc complete and giving satisfactory trail run etc complete, transportation and installation of transformer, providing new terminals to 240sqmm cable by crimping 185mm, providing new terminals to 240mm cable by crimping cramping 185mm, supply of breather, supply and fixing of lt busing with sealing stud and bolts etc complete, supply and fixing of ht busing with sealing stud and bolts etc complete, supply of transformer oil including filling of oil by hot process including labour and transportation charges, backing the winding assembly in thermostat oven bill getting mongering valvue etc complete, drying out the assembly of cone, cleaning repair and painting inside the transformer tank with hot oil and acid proof painting outside the tank, hire charges of/day, transformer rewinding charges, motor 100hp mainboard patti, motor 100hp starter patti, main switch kit of chamber switch, transformer repair charges, motor pumpset 7hp 12 stage, motor 100hp borewell operation through mobiles kit, motor 100hp starter box, motor 100hp switch disconnector., motor 100hp volt meter, motor 100hp amphere meter, motor 100hp 32amp 415v fuse, motor 100hp 250amp mcb, motor 100hp rotor rewinding charges, motor 100hp new relay chages (225amp auto tranformer sapple thermal relay), motor 100hp bushing installing charges, motor 100hp coupling bushing, motor 100hp greasing charges, motor 100hp 500amp fuse, motor 100hp c t coil, motor 100hp panel box timer kit, motor 100hp pump transport and refitting charges, motor 100hp water fan, motor 100hp packing set, motor 100hp soot gland, motor 100hp pump neckring, motor 100hp bearing bogala, motor 100hp pump bushing, motor 100hp 6310 ball bearing, motor 100hp pump bearing (a) 6310 rollore bearing, motor 100hp pump shaft, motor 100hp pump couple, motor 100hp terminal kit, motor 100hp transport and installatin charges, motor 100hp bearing plate, motor 100hp motor couple, motor 100hp exhaust fan, motor 100hp rotor lamination charges, motor 100hp bearing den 316 & nde 6315, motor 100hp bearing den 316 & nde 6314, motor 100hp rewinding charges, motor 10hp transportation, turbine 150hp motor hrc fuse, turbine 150hp motor 325amp 440 volt, turbine 150hp motor switch disconnector, turbine 150hp motor volt meter, turbine 150hp motor amphere meter, turbin 150hp motor rotor rewinding charges, starter relay (250amp auto transformer), turbine 150hp motor rewinding 18inch turbine pipe, turbine 150hp motor starter oil, turbine 150hp motor pump head, turbine 150hp motor terminal kit, turbine 150hp motor t t nut, turbine 150hp motor oil circular, turbine 150hp motor starter lining patti, turbine 150hp motor starter repair charges, turbine 150hp motor 250 amp 4 rc fuse, turbine 150hp motor starter guard, turbine 150hp motor starter coil, turbine 150hp motor pump fan, turbine 150hp motor tube, turbine 150hp motor pump bushing, turbine 150hp motor de 2932ge (11) nde 6319, turbine 150hp motor de 2932ge (11) nde 6318, turbine 150hp motor tube bushing clamp, turbine 150hp motor packing set, turbine 150hp motor transport and installation charges, turbine 150hp motor pump neckring, turbine 150hp motor tube bushing, turbine 150hp motor pump shaft, turbine 150hp motor pump stage, turbine 150hp motor bearing, turbine 150hp motor rewinding, cement pole, ml-2 starter contactor, auxilary switch, mk-1 starter relay, amphere and volt meter box, fuse 63amp, fuse 16amp, main switch 32amp, fuse 105amp, fuse 32amp, main switch 63amp, main switch 16amp, main panel board patti, starter relay (225 amp auto transformer sapple, motor 120hp starter rewinding charges, m

State Government

CTN :40425735

28 May, 2025 NA

Pune - Maharashtra

Tender For regarding supply of cctv cameras maintenance repair for 12 months (servicig) and materials - cctv material, hikvision hd nvr 32 ch, hikvision hd nvr 16 ch, hikvision hd nvr 08 ch, wd hard disk 6 tb, wd hard disk 4 tb, wd hard disk 2 tb, hikvision ip bullet hd camera 20 mtr, hikvision ip bullet hd camera 30 mtr, hikvision ip bullet hd camera 40 mtr, poe switch 4 port 10 / 100 giga, poe switch 8 port 10 / 100 giga, poe switch 16 port 10 / 100 giga, switch 08 port 10 / 100 giga, crimping connectors ,power pin, enclosure, wall mounting rack, cat 6 cable outdoor, 2 core cable outdoor, 3+1 cctv cable outdoor, wall mounting rack small, clamp for metal box, adapter for poe, stabilizer, wall mounting rack 3 u, hikvision hd 08 ch,dvr 2 mp, hikvision hd 16 ch,dvr 2 mp, hikvision bullet camera 2 mp, hikvision dome camera 2 mp, bnc / power connectors, power supply 12 v, attendance machine, annual maintainence

State Government

CTN :40398381

13 Jun, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint. # th

State Government

CTN :40005494

03 Jun, 2025 25.47 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : supply of various pipes and fittings for stacker-cum-reclaimer a & b at lignite handling plant - bltps. - parallel male stud coupling with nut welding, part no. ge 16 s x 1/2", 2, 7, set, 58, pipe clamp pch 12 pipe size, 6, 100, numbers, 18, pipe clamp pch 28 pipe size, 10, 6, numbers, 20, sae 1 1/2" 6000psi flange without "o" ring groove socket, 14, 4, set, 18, sae split flange 1 1/4" 6000 psi, 18, 5, numbers, 10, seamless tee od 48.3 x 7.1 mm socket weld sch-160, 22, 2, set, 4, swivel elbow with nut welding nipple, part no. se-25-l, 26, 8, set, 4, tee 22l with nut welding nipple,part no. t-22-l, 30, 2, set, 2, tee 25s with nut welding nipple t- 25s, part no. t-25-s, 34, 80, meter, 140, tube od 22 x 2 mm thickness seamless, 38, 50, meter, 12, tube od 48.3 x 7.1 mm thickness seamless sch-160, 42, 6, set, 13, elbow with nut and welding nipple,part no. e-16 s, 46, 15, set, 5, elbow with nut and welding nipple,part no. e- 28 -l, 50, 6

Central Government/Public Sector

CTN :40388840

09 Jun, 2025 NA

Dakshina Kannada - Karnataka

Tender For supply of 110kv 800a switchyard connector / clamps suitable for 30mm stud (1 way) x 23.45mm acsr , supply of 110kv 800a switchyard connector / clamps suitable for 23.45mm acsr conductor (" t" clamp) , supply of 110kv 800a switchyard connector / clamps suitable for gos pad clamp (pad hole to hole dist

corporations/Associations/Others

CTN :40424251

28 May, 2025 95.5 Thousand

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.