Hook Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38601247

06 Jan, 2025 5.00 Lacs

Diglipur - Andaman And Nicobar Islands

Tender For supply of frls pvc insulated 1.5 sqmm copper wire , frls pvc insulated 2.5 sqmm copper wire , frls pvc insulated 4.0 sqmm copper wire , pvc insulated aluminium service wire twin core 4.0 sqmm. , pt socket 5 by 6a , pt switch 15 by 16a , pt socket 15by 16a , clamp 20mm , mcb single pole 16a , mcb single pole 20a , mcb isolator double pole 40a , led round concealed fittings 15 w similar to luker product code lipr15 , led round concealed fittings 18 w similar to luker product code lnpsrr18 , luker 10w mirror light code lt 510p , crompton maple lpto 40 cdl 40 w decorative post top , crompton maple lpto 40 cdl m 40 w decorative post top , inventaa led felisa post light aluminium cast series 20 w 275 dia x 235 model 20c by y 2455

Central Government/Public Sector

CTN :38604144

10 Jan, 2025 NA

Multi City - Multi State

Tender For provision of anti-bird disc for porcelain & composite insulators, live line monitoring gauge, preventing contact & catenary wire parting on account of rra clamp & isolator jumper in ddu division.

Central Government/Public Sector

CTN :38604279

23 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For supply of modified cbc operating handle as per drg.no.sr/dee/rs/ed/mech.103, alt 1. one set consist s of 02 items 1) item no.4: top lifting assembly qty: 01 no. 2) item no.5, top lifting hook. qty: 01 no [ warr anty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38519150

08 Jan, 2025 16.02 Lacs

Alipurduar - West Bengal

Tender For supply of hardware fittings for transmission lines - compression dead end for lapwing acsr conductor , grading ring for lapwing acsr conductor , corona control ring for lapwing acsr conductor , arcing horns for lapwing acsr conductor , rigid spacer for jumper suitable for acsr lapwing conductor , jumper cone for acsr lapwing conductor , flexible copper bond , mid span compression joints , suspension clamps assembly , pg clamps , arcing horns for acsr twin fittings , anchor shackle , pg clamp , single suspension 220 kv hardware fitting , 220 kv single tention hardware fitting , 220 kv double tention hardware fitting , repair sleeve for acsr zebra , arcing horn 220kv single tension , arcing horn 220kv single suspension , dead end assessembly , jumper cone suitable for acsr zebra conductor , link plate suitable for 220kv single zebra

State Government

CTN :38600251

31 Dec, 2024 25.36 Lacs

Shimoga - Karnataka

Tender For dismantling of existing porcelain lightening arrestors, surge counters, cvts, acsr conductor, supporting porcelain insulators, supporting structures, complete form line side insulator to takeoff tower for 66kv shimoga bhadra lines 1, 66kv shimoga bhadra lines 2 and lh transmission lines.2)2)supply, erection, testing and commissioning of 3 nos. of 66kv transmission line equipments like cvts, polymeric lightening arrestors with surge counters, supporting polymeric insulator stacks, lynx acsr conductor, clamps, connectors, structure etc. complete from line side isolator to take off tower of 66kv transmission line equipments from line side isolator to take off tower at bhadra generating station.3.dismantling of existing 72.5kv, 0.5cl current transformers, supply, erection, testing and commissioning of 0.2 class, 72.5kv current transformers for 12mw river bed units 1 and 2 at bgs.4.supply of essential spare 04 nos. of 66kv polymeric insulator stack and 01 no. of 0.2cl 72.5kv current transformer.5.jungle clearance along the lines wherever necessary.6.the scope also includes testing at works before dispatch, pre-commissioning and commissioning tests at site and the performance guarantee tests in respect of 72.5kv cts, 60kv las, 72.5kv cvts required for bhadra generating station.7.the scope of supply shall include all accessories, marshalling box, terminal connectors, wedges, clamps, supporting structure etc., which are necessary for assembly and erection of ct, cvt & la.8.modifications required for foundation and support structures to erect newly supplied cts, cvts and las shall be carried out by contractor at no extra cost.

State Government

CTN :38563937

02 Jan, 2025 NA

Wardha - Maharashtra

Tender For supply for neurology instruments - supply of neurosurgery instruments, elevator, cobb. 10mm wide. 25cm/10"., elevator, cobb. 13mm wide. 25cm/10"., elevator, cobb. 19mm wide. 25cm/10"., elevator, cobb. 16mm wide. 25cm/10"., cloward large cervical spine retractor, self retaining. hinged arms. with 5 sharp blades & 5 blunt blades. opening 11/12cm. length 25cm/10"., vertebral body distractor for the left approach to c5 thru t1/2 & the right approach to the upper cervical spine., screwdriver for distraction screws.caspar. 20cm/8"., distraction screw.caspar. 12mm, distraction screw.caspar. 14mm., cloward depth gauge. 21cm/8.5"., caspar retractor. modified. double hinged arms. complete with 5 sharp & 5 blunt blades., retractor, microlumbar discectomy. williams. 20mm x 70mm blade. rt. length 19.5/7.5"., retractor, microlumbar discectomy. ramani.hinged.complete with 2 pairs of serr blades & 2 hook blades., nerve root retractor. hess. 5mmw/90mmd. 18cm/7"., nerve root suction retractor. smith. 6mmw/3mmlip., fcps., bone cutting. d/a. tudor-edwards rib cutting. scv. 27cm/10.75"., punch/rongeur, kerrison. 3mm-up bite. 18cm/7"., punch/rongeur, kerrison. 1mm-ald. up bite. 18cm/7"., punch/rongeur, kerrison. 2mm-ald.up bite. 18cm/7", punch/rongeur. kerrison. 3mm-ald. up bite. 18cm/7"., punch/rongeur. kerrison. 4mm-40 ald. up bite. 18cm/7"., punch, disc. 1.5mmx10mm. cloward. serr. edges. str. 18cm/7"., punch, disc. 2mmx10mm. cloward. serr. edges. str. 18cm/7"., punch, disc. 3mmx10mm. cloward. serr. edges. str. 18cm/7"., punch, disc. 4mmx10mm. cloward. serr. edges. str. 18cm/7"., punch, disc. 5mmx10mm. cloward. serr. edges. str. 18cm/7"., punch, disc. 2mmx10mm. cloward. serr. edges. ald. down-45 . 18cm/7"., punch, disc. 3mmx10mm. cloward. serr. edges. ald. down-45 . 18cm/7"., punch, disc. 2mmx10mm. cloward. serr. edes. ald. up-45 . 18cm/7"., punch, disc. 3mmx10mm. cloward. serr. edges. ald. up-45 .15cm/7"., retractor, beckmann/mayo-adson. 4x4 prong 45mmdx25mmw. sp/bl. hinged arms. 32cm12.5"., retractor, laminectomy. mod. harris with1 pair of 50mmdx38mmw blades and 1 pair of 50mmdx 55mmw blades. 14cm/5.5" hingedarms. 15cm spread., retractor, beckman eaton. 7x7 sharp prongs-50mmdx63mmw. folding blades. 32cm/13"., curette, no:4/0. lempert/spinal fusion. with fibre handle. ald. 21cm/8.25"., curette, no:3/0. lempert/spinal fusion. with fibre handle. ald. 21cm/8.25", curette, no:2/0. lempert/spinal fusion. with fibre handle. ald. 21cm/8.25"., curette, no:1/0. lempert/spinal fusion. with fibre handle. ald. 21cm/8.25", curette, no:1. lempert/spinal fusion. with fibre handle. ald. 21cm/8.25", curette, ring. 3mm. str. cone. 23cm/9", curette, ring. 4mm. str. cone. 23cm/9", curette, ring. 5mm. str. cone. 23cm/9", curette, ring. 6mm. str. cone. 23cm/9", gigli saw guide and protector. demartel. cvd. 30cm/12"., handle for gigli saw., galea fixation hook with bulldog clamp. 9mm. length 41cm., elevator, langenbeck. cvd. edge. 15mm.lght cvd. 19cm/7.5"., nerve hook, 3mm. blunt.str 20cm/8"., elevator, adson. 7mm. cvd. sh/edge. 17cm6.75"., metzenbaum scissors, cvd. 20cm/8"., metzenbaum scissors, str. 20cm/8"., dura separator & guard. horsley. 6.5mm x 7.5cm blade. 21cm/8.5"., macdonald dissector. d/e. 20cm/8"., fcps., adson. 1.5mm. 1x2 tth. 12cm/4.75", fcps., adson. 1.5mm. serr. 12cm/4.75", mayo scissors, cvd. 19cm/7.5"., mayo scissors, str. 19cm/7.5"., penfield dissector. no.1. 18cm/7"., penfield dissector. no.2. 20cm/8"., penfield dissector. no.3. 20cm/8"., penfield dissector. no.4. s/e. 22cm/8.5", penfield dissector. no.5. 20cm/8". ., ventricular cannula, dandy/cushing. ss.2.0mm/14g. graduated. 9.5cm/3.75"., sterilisation box, for autoclaving; std. stainless steel. size 52cmx20x10cm/21"x8"x4". for nathanson retractor system / laproscopy ., rhoton dissector. round. medium. 2.3mm.# 2. 19cm/7.5". titanium., rhoton spatula dissector. medium. # 7. 19cm/7.5". titanium., rhoton semi sharp hook. 90 .# 9.19cm/7.5". titanium., rhoton blunt hook.90 . # 10.

CTN :38602178

06 Jan, 2025 NA

Chandigarh - Chandigarh

Tender For supply of white cement 1 kg packing make jk birla , tapecrete 5ltr packing , mortice lock good quality , aluminium tower bolt 8 make argent classic , aluminium tower bolt 6 make argent classic , aluminium hasp and staple 4 make argent classic , aluminium handle 6 make argent classic , aluminium door stopper make argent classic , aluminium sliding bolt 250mm make argent classic , aluminium sliding bolt 200mm make argent classic , aluminium sheet 22 gauge , aluminium beading length 12rft , fevicol ssr , coat hooks good quality , cp curtain rod 20mm length 12rft , gypsum screw 1 packing 1000 nos , gypsum screw 2 packing 500 nos , gypsum screw 3 packing 500 nos , self drilling screw 3 4 packing 1000 nos , self drilling screw 1 packing 1000 nos , self drilling screw 2 packing 500nos , wooden screw 50x10mm , wooden screw 35x8mm , wooden screw 30x7mm , wooden screw 25x6mm , nails 1 , nails 1 5 , nails 2 , nails 3 , nails 4 , ply nails 1 25 x17no , ply nails 1 x17no , black nails , pivot , iron hinge 3 good quality , iron hinges 4 good quality , aluminium hinges 4 good quality , painting brush 5 make tiger asian , painting brush 3 make tiger asian , floor spring machine make sandhu , double action hinges 5 make herkya , door closer make universal ritz everest , cement make acc birla shree ambuja , ms welding rod good quality

CTN :38485432

23 Dec, 2024 NA

Hathras - Uttar Pradesh

Tender For supply of material under edc hathras. - supply of following item, i hook clamp, i hook, suspenssion clamp, dead and clamp, holding clamp, f/e bracket for fitting top insulator, x arms brassing clamp for stp, x arms brassing clamp for pcc, clamp distribution box lt 1 face 3 face, pg clamp for dog to dog conductor, pg clamp for weasal to weasal conductor, stay insulator 11 kv

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government