Inspection Service Tenders

Central Government / Public Sector

CTN :38079589

17 Mar, 2025 NA

Barauni - Bihar

Tender For corrigendum : design, engineering, procurement, manufacturing, third party inspection,fat, statutory clearances, supply, transportation of all equipment/ materials to the work site, materials management, construction, assembly, installation, testing, pre-commissio

CTN :39574565

15 Mar, 2025 NA

Pulwama - Jammu And Kashmir

Tender For supply of interactive panels with cpu (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),additional doc 2 (requested in atc),additional doc 3 (requested in atc),additional doc 4 (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 50 % bid number/ & ( 9 ) : gem/2025/b/6017938 dated/ : : 05-03-2025 bid document/ 5 5 1 / 9 bid to ra enabled/ a %a % :& :& : : no rcm applicable/ yes type of bid/ 7 7 two packet bid time allowed for technical clarifications during technical evaluation/ c c 5 e 5 e 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ c c f f total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ h state bank of india emd amount/ 75000 epbg detail/ required/ i no (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 k % 5 75 % 5 % 7 h n a o (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , q 0 r : beneficiary/ q q : principal govt degree college for women pulwama govt degree college for women pulwama, higher education department jammu and kashmir, n/a, (principal) mse purchase preference/ mse purchase preference/ no mii purchase preference/ 2 / 9 mii purchase preference/ no 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. past performance: the bidder or its oem {themselves or through re-seller(s)} should have supplied same or similar category products for 50% of bid quantity, in at least one of the last three financial years before the bid opening date to any central / state govt organization / psu. copies of relevant contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity supplied in the relevant financial year. in case of bunch bids, the category related to primary product having highest bid value should meet this criterion. section 9(3) of gst/ 9(3) 9(3) where ever rcm is applicable, sellers (regular gst registered seller who opted out of fcm , unregistered seller, seller registered under composition scheme)will be forced to put zero gst and gst cess in their bids. buyer will have liability of paying the gst and gst cess to the government on the specified rate mentioned by them in this bid. if the buyer has mentioned mse purchase preference in atc then service provider is required to upload necessary documents for mse purchase preference for verification by the buyer during evaluatio

CTN :39574890

08 Mar, 2025 NA

Udaipur - Rajasthan

Tender For supply of all in one pc (v2) (q2) , scanner (v2) (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 80 % bid to ra enabled/ 8 %8 % :& :& : : no bid number/ & ( ; ) : gem/2025/b/6022482 dated/ : : 05-03-2025 bid document/ 5 5 1 / 12 type of bid/ 7 7 two packet bid primary product categoryall in one pc (v2) time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ required/ g no epbg detail/ required/ g no mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company 2 / 12 and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 are not eligible to participate. however, eligible micro and small enterprises will be allowed to participate .the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023. om_no.1_4_2021_ppd_dated_18.05.2023 for compliance of concurrent application of public procurement policy for micro and small enterprises order, 2012 and public procurement (preference to make in india) order, 2017. 3. purchase preference will be given to mses having valid udyam registration and whose credentials are validated online through udyam registration portal as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued

Central Government/Public Sector

CTN :39573691

19 Mar, 2025 1.88 Crore

Golaghat - Assam

Tender For providing of custom bid for services - service assistance for upscaling of risk based inspection rbi activities firm quote for providing 05 nos integrity engineers for 18 months including management charge gst and other taxes,custom bid for services - firm quote for providing 10 nos technical data loading support staff for 18months including management charge gst and other taxes

State Government

CTN :39560339

19 Mar, 2025 5.14 Lacs

Manuguru - Telangana

Tender For ktps-vii stage-chp-coal chasing- providing of one no. diesel jeep, (yom: not older than 7 years as on 31.03.2025) including fuel charges, driver salary, maintenance charges, road taxes, insurance and all statutory payments etc., and toll and parking charges on hire basis @ 12 hrs/day for a mileage upto 3000km/month for the official utilization of asst. divisional engineer/coal chasing/ktps vii stage i.e, ( supervision/inspection of joint sampling procedure at various coal loading points of m/s sccl like rudrampur,sathupally,manuguru,yellandu and koyagudem frequently, carry the party coal sample packets to chemical laboratory and arranging coal rake moment )for the period from 01.04.2025 or from actual date of commencement to 31.03.2026.

State Government

CTN :39560334

19 Mar, 2025 4.35 Lacs

Multi City - Telangana

Tender For ktps-vii stage-chp- providing of one no. a/c car, (not older than 7 years as on 31.03.2025) including fuel charges, driver salary, maintenance charges, road taxes, insurance and all statutory payments etc., except toll and parking charges on hire basis @12 hours per day for a mileage upto 2000km/month for the official utilization of superintending engineer/chp/ ktps-vii stage (i.e., attending emergency works and inspection of sites, etc.,) for the period w.e.f.01-04-2025 or from the actual date of commencement to 31-03-2026

Co-operative

CTN :39539139

10 Mar, 2025 2.75 Lacs

Mehsana - Gujarat

Tender For annual rate contract for safety osp jobs lifting tools - 100879, 50.000, osp jobs pressure vessel, subject:testing & certification, item name:for our pressure vessels under section 31,,statutory requirement:submission of n.d.t. form,additional information:mehsana 1/2 year., 100881, 40.000, osp jobs lifting tools, subject:testing & certification, item name:for lifting tools & tackles under section 29,statutory requirement:submission of form no.10,additional information:5-chilling centres., 100883, 40.000, osp jobs pressure vessel , subject:testing & certification, item name:for our pressure vessels under section 31,,statutory requirement:submission of n.d.t. form , additional information: 5-chilling centres 1/2 year., 100885, 40.000, osp jobs pressure vessel, subject:testing & certification, item name:for our pressure vessels under section 31,,statutory requirement:submission of form no.11, additional information:5- chilling centres 1/2 year., 100887, 20.000, osp jobs pressure vessel hydraulic testing ,job description: charges for two yearly testing & certification , pressure vessel hydrolic testing as per factory act ,form 11. for dsd,ccs,cfp plants, 107554, 15.000, ospdudhsagar dairy,mehsana,setelite dairy (5 chilling centres and all cfps ) testing & inspection certificate of cream seperator machine, centrifuge dangerous machine, section-21,dish approved competent person.

Central Government/Public Sector

CTN :39542860

15 Mar, 2025 3.78 Lacs

Kozhikode - Kerala

Tender For providing of the refilling of fm-200 (hfc 227ea- weight: 90 kg) gas in installed fm 200 bottle onboard icgs c-404 to be carried out. scope of work includes following:- (i) emptying of cylinder and refilling of fm-200 gas, pressure testing of cylinder prior re-filling to be undertaken. (ii) dismandling/ installation and transporting of cylinder from icgs c-404 to your workshop. (iii) testing and issue of gas purity certificate and cylinder pressure testing certificate. (iv) offer inspection of filling to ship's representative. (v) all other in-way jobs included. (vi) job to be undertaken by oem (m/s solas marie) authorised service reps only. technical details:

Central Government/Public Sector

CTN :39555888

25 Mar, 2025 7.00 Lacs

Goa - Goa

Tender For custom bid for services - annual maintenance contract for ground support equipment- this scope of work for is for the engagement of a technical person qualified with a minimum diploma in mechanical engineering, for the amc of ground support and equipment (gse).the technical person will be deployed to manage and maintain all gse items. the scope of workinclude preventing, maintenance, repairs the scope of work under proposed amc comprises of:- (a) painting of all items of gse at least twice in a year or whenever required will be carried out bythe contractor. the paint will be supplied by the contractor. (b) the consumables spare including lubrication oil (servo 68, air compressor lub oil), hoses,filters, cables, plugs, seals, washers, pins, circlips, brushes for painting, cleaning material (includingsoap/ detergent, cloth, rag pieces, etc), gauges, sight glass, other plastic/rubber components,adapters, wheels, tyres, bearings, bushes, beading, all jack consumable spares (o-ring, springs,metallic bearing, bushes, metallic washers & grease), required for undertaking scheduled/ periodicalservicing and repair of the gse enclosed are to be supplied by the contractor. (c) the scheduled/periodical servicing of gse as per list attached and repairs- wheneverwarranted. (d) the cost of consumable require for scheduled/ periodical servicing of gse will be borne by the contractor. (e) the contractor shall cater for one in number qualified technician(diploma in mechanica!engineering) for five days in a week for carrying out routine inspection and servicing of gse. all the maintenance and repair activities are to be undertaken by suitable qualified technical personnel and within reasonable time frame as decided mutually by customer and contractor. working hours of unit(icgae goa/ 800 sqn) will be followed by the contractor's repair/ maintenance team. the leaverelief is to be provided by the contractor well in advance and the same is to be intimated to the unit.the leave relief needs to be qualified, knowledgeable and well conversant with the available gse. (f) calibration of gauges as per servicing schedule by nabl accredited laboratory is to beundertaken within contract and calibration certificate needs to be provided. (g) hydro static test (hst) of nitrogen cylinder and lp compressor is to be undertaken withincontract, if due. (h) replacement of gauges if unserviceable is to be undertaken within contract. -msme exemption - yes | startup exemption - no

Central Government/Public Sector

CTN :39544579

07 Mar, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For visual inspection of trusses supporting the deck sheet roof of tacbuilding stage iii at ntpc rihand

By Cities

By States

By Agencies

By Ownerships

By Sectors