Get complete information related to latest Iron Product Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Iron Product Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Iron Product Tenders.
Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges
Tender For building material - thanapsakpadah 2 inch pins iron bars tested iron/bars (pap danta j) 8 bars iron/bars (pap danta j) 10 bars iron/bars (pap danta jhd) 12 bds lappatma cement (chbp pap 1489/1991) 50 litres, 53 liters of sand per cubic meter. sand-clean as per standard, ballast 20 mm per cubic meter, ballast 40 mm. per cubic meter, stone dust (sajvadum knej) per cubic meter, murum hard per cubic meter, pottery size of baked brick 94 inch per thousand, brick (sal. i.t.b.) size (94) inch per thousand, sal/bija frame per square feet, palla door q1. 36'x70' feet 30 mm per piece board waterproof laminated, palla door q2. 29'x70' feet 30 mm per piece board waterproof laminated, pipe 1 inch c.p.v.c., l.p 20 feet per piece a pipe 1.5 inch c.p.v.c. 20 feet per piece a pipe two inch c.p.v.c. ? 20 feet per piece a pipe three inch c.p.v.c. 20 ft per piece a plastic water tank four layer 1000 litre per piece ppa plastic water tank four layer 500 litre per piece ppa plastic water tank 6 mm (2x2 ft) per sq. ft. double charge a granite per sq. ft. tata steel profile sheet 4x10 mm 25 gauge (0.5mm), tata steel profile sheet 4x12 mm 25 gauge (0.5mm), tata steel profile sheet 4x14 mm 25 gauge (0.5mm), tmt frame and counterfeiting parts, cement frame 36'x70' per piece, iron frame 36'x70' per piece paver block per piece
Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm
Tender For supply of diy lab accessories - raspberry pi 5 8gb ram with 64gb memory card and piduino official raspberry pi 5 27w usb power supply , arduino uno , 8 hdmi supported lcd display , key board , mouse , multi bit screw driver small , multi bit screw driver big , relay module , smps , plier , nose plier , wire striper cutter , hot air blower , digital multimeter , allen key set , 500 w hand drill machine , cordless hand drill machine , 670w angle grinder , pla fliament 1kg , jumper wires mm 40psc , jumper wires mf 40psc , jumper wires ff 40psc , desoldering wick , multi bit soldering iron , solder wire , soldering flux , desoldering pump , soldering iron stand , red and blue led , bread board 830 , dc jack male , potentio meter , electric tape , double side tape , hot glue gun and stick , different size drill bit set , 4 wood cutter wheel , 4 hand grinding wheel , awg high quality wire , different size zip ties , m3 bolt length , m4 bolt length , esp32 , 4 channel 5v relay module control , 5v dc power adapter , 6a 220v single pole ac switch and pvc board , 230 v square cooling fan , 5 w 220 v led bulb , holder and pvc board for led bulb , dual color wire for wiring , pir sensor , l293d 4channel dc motor driver shield for microcontrollers4 channel driver , pca9685 16 channel 12 bit pwm servo motor driver i2c module uno pic , x400 s400 drone kits included carbon fibre frame with landing gear motor prop and esc , pixhawk fc with power module saftey switch and buzzer original , xt 60 connector male-female pair , gnss receiver stand , vibration absorbing pad for fc , 200by300mm belcro belt , 6000 mah lipo battery , gnss receiver , 10 ch rc transmitter and receiver for drone , servo tester , lipo battery balance charger , duracell aa rechargeable battery , aa battery charger , sensor kit 40 in 1 bid number/ ( ( ) ): gem/2024/b/5694372 dated/* : 11-12-2024 bid document/ 1 1 / 45
Tender For renovation of iron removal filtration plant supplying fitting and fixing of activated carbon filtration plant oxidation chamber and cleaning of aeration chamber in neriwalm tezpur
Tender For providing of custom bid for services - management preparation and serving of lunch dinner parcel for running room occupants qty 200 nos per day for two years,custom bid for services - management preparation and serving of breakfast and parcels for running room occupants qty 100 nos per day for two years,custom bid for services - supply of newspaper and magazines of english hindi marathi language as per annexure a for a period of two years,custom bid for services - washing ironing and supply of soiled linen for igp running rooms bed sheets qty 365000 nos for a period of two years,custom bid for services - washing ironing and supply of soiled linen for igp running rooms pillow cover qty 182500 nos for a period of two years,custom bid for services - washing ironing and supply of soiled linen for igp running rooms mosquito nets qty16018 nos for a period of two years,custom bid for services - washing ironing and supply of soiled linen for igp running rooms curtains qty11678 nos for a period of two years,custom bid for
Tender For supply of spare parts of bp bunker 709 - piston set std of br bunker 709 , piston ring set std of br bunker 709 , main bearing set of br bunker 709 , big end bearing set of br bunker 709 , main oil seal of br bunker 709 , timming case oil seal of br bunker 709 , cam ticky of br bunker 709 , cranck thrust washer set of br bunker 709 , engine overhaulling gasket set of br bunker 709 , inet value set of br bunker 709 , exhaust valve set of br bunker 709 , valve cap oil seal set of br bunker 709 , m oil filter tc of br bunker 709 , diesel filter bs iii of br bunker 709 , air cleaner filter inner and outer set of br bunker 709 , red bond tube , fan belt of br bunker 709 , radiator hose pipe set of br bunker 709 , valve cotter set of br bunker 709 , radiator hose pipe clip big and small of br bunker 709 , tie rod end set of br bunker 709 , oil sump gauge inner and outer set of br bunker 709 , clutch cylinder upper of br bunker 709 , clutch cylinder lower of br bunker 709 , brake fulid 1 liter , connecting rod bush set of br bunker 709 , side piston ring set of br bunker 709 , side piston piece set of br bunker 709 , fly wheel ring of br bunker 709 , gear oil 6 liter , center bearing of br bunker 709 , head light relay gypsy type , combination switch of br bunker 709 , head light bulb hellogen left and right of br bunker 709 , wiper blade left and right of br bunker 709 , tee horn , fuse 20 amp , fuse link of br bunker 709 , tape roll black , lt wire 5 mm 1 roll , head hight holder , door lock bus type left and right , door inner handle bus type , door outer handle with key bus type , door outer handle left side bus type , bonnet assembly of br bunker 709 , front show grill of br bunker 709 , angle iron 1 inch by 1 soot 15 kg , ms welded wire mesh 3 feet by 1 inch 25 sqft , round bar 6 mm 15 kg , back door lock bus type of br bunker 709 , front bumper assembly of br bunker 709 , calcium carbide , welding rods , ccm rods 700 gram , bombay masala , cutting blade 4 inch , ms tin sheet 6 feet by 4 feet 18 guage , front mudguard left and right of br bunker 709 , body filler white , sanding paper blue no 80 , sanding paper blue no 180 , water proof paper no 220 , water proof paper no 320 , flap disc no 60 , french chack 1 box , deco surfacer grey , n c putty , espa paint olive green , n c thinner , esdee steel primer , black paint espa 1500 gram , masking tape , matt black , dhoti cloth , white paint espa 500 gram , post officer red paint 500 gram , tarpin oil , news paper old 500 gram bid details/ 2 / 58