Joists Tenders

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :38982857

30 Jan, 2025 5.43 Lacs

Thiruvananthapuram - Kerala

Tender For supply of materials for kalivilakam ward anganwadi construction - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), fine sand (zone iv), bright finished or black enameled mild steel butt hinges 125x65x2.12 mm, bright finished or black enameled mild steel screws 50 mm, mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, oxidised mild steel tower bolt (barrel type) 200x10 mm, oxidised mild steel screws 30 mm, oxidised mild steel handles 125 mm, oxidised mild steel screws 25 mm, brass 100 mm mortice latch and lock with 6 levers without pair of handles, pair anodised aluminium lever handles for 100 mm mortice latch and lock, 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish, 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish, iron hooks & eyes 100 mm, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc bend 110 mm dia

corporations/Associations/Others

CTN :39001736

31 Jan, 2025 NA

Chennai - Tamil Nadu

Tender For construction of plinth for 160 mva auto transformer - i with supports plinth for a-frame, radiators and cooling fans, transformer oil pipe lines and fire protection wall, modification of transformer gantry with rs joist and 'c' boom etc., construction of oil sump at kadaperi 230/110 kv ss.

CTN :39032605

10 Feb, 2025 15.58 Lacs

Malappuram - Kerala

Tender For supply of different materials for mgnrega works - material supply, quarry waste, stone aggregate(single size):20mm normal size, stone aggregate(single size):10mm normal size, stone aggregate(single size):40mm normal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40mm), structural steel such as tees,angles,channels and r s joists, red oxide zinc chromate primer, sundries, galvanised wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35 mm thick, bitumen washer(50nos), stainless steel screws 50mm(50nos), sundries

State Government

CTN :39079993

10 Feb, 2025 1.15 Crore

Surendranagar - Gujarat

Tender For supply of mgnrega - supplying common bunt clay bricks conventional size , supplying common bunt clay modular bricks 20x10x10 size , supplyion of 53 or 43 grade open on pipe cement of isi approved brand , supplying of fine sand on sie , supplying of corse sand on sie , providing and fixing 35 mm thick shutter for door and window and clear story window including anodised alluminium butt hinges with necessary screws.(a) indian teak wood.(ii)fully panelled , providing 25 mm thick for cupboards etc including black enamelledd m.s.butt hinges with necessary screws. partly panelled & partly glaged with iron hinges , providing and fixing glazed louvered glass window and ventilation with teak wodd frame 10 com x 7 cm size incl. 3 coat of oil painting to wood work etc. , supplying rough kota stone 25 mm thick , supplying of glazed times of 15 x 15 x 6 cm size or approve size , supplying of vitrified tiles 24 x 24 size antiskid , supplying of dry distember primer , supplying of distember primer , supplying of water proof cement paint , supplying of birla well care putty , supplying of plastic emulasion paints , suplying of indian type squating pan w.c. , supplying of urinol , supplying of upvc pipe (a)20 mm dia , supplying of upvc pipe (a)15 mm dia , supplying of upvc pipe (b) 32 mm dia , supplying of upvc pipe (b) 25 mm dia , supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 10 kg/ cm2 pvc pipe (c) 110 mm dia , supplying of 100 mm dia, 60cm long ston ware pipe , supplying of 160 mm dia upvc, pipe , supplying of brass screw down bib tap of 15 mm dia , supplyin of c i nahni trap , supplyin of pvc swr gully trap 160x110 , supplying of pvc water tank of approved make , supplying of 32 mm gun metal valve , c i cover with frame size 500/700 , c i cover with frame size 300/300 , supplying of tmt bars fe415 rinforcment for rcc work , supplying of stainless steel glosy asis 304 grade 1mm thick with over all size 610x460 mm and bowl size560x410x200 , supplying of 30 mm thick factory made solid panal pvc door stter , supplying of paver block mk 250 grade 60 mm thi , supplying of curve , supplying of np-2 non pressare pipe (a)150 mm dia , supplying of np-2 non pressare pipe (b)300 mm dia , supplying of np-2 non pressare pipe 450 mm dia , supplying of np-2 non pressare pipe (d)600 mm dia , supplying of np-2 non pressare pipe (e)900 mm dia , supplying of np-2 non pressare pipe (f)250 mm dia , supplying of np-3 non pressare pipe (b)300 mm dia , supplying of np-3 non pressare pipe (b)450 mm dia , supplying of np-3 non pressare pipe (b)600 mm dia , supplying of np-3 non pressare pipe (b)900 mm dia , supplying of 10mm aggregate , supplying of 20mm aggregate , supplying of 40mm to 63mm aggregate , supplying of stone dust , through and bond stone , supplying of rubble , supplyin of galvenised corrugated sheet 0.8 mm thic , gi j or l hook , supplying of galvenised mild steel tube 50 mm dia , steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (a) in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamnship & jack rafters, purlins connected to common rafters and like. , flat back wash basin color glazed 450x 300 size , providing and fixing extruded aluminium windos having extyuded aluminiyum colour anodized section

State Government

CTN :39098115

08 Feb, 2025 NA

Cooch Behar - West Bengal

Tender For repairing and strengthening of joist pile bridge (singijanj setu) at 1.50 km of 5 no. bazar to bhowmick para road under cooch behar division pwd in the district of cooch behar.

CTN :39103153

08 Feb, 2025 NA

Bokaro - Jharkhand

Tender For g.s. sheet roofing, welding of damaged angles, channels and joists and painting of tripplers shade and its structure of 4/5/6 and 7/8 incline, dhori (k) colliery, dhori area

State Government

CTN :39122352

12 Feb, 2025 23.61 Lacs

Cooch Behar - West Bengal

Tender For repairing and strengthening of joist pile bridge (singijanj setu) at 1.50 km of 5 no. bazar to bhowmick para road under cooch behar division pwd in the district of cooch behar.

CTN :39094453

25 Jan, 2025 NA

Patna - Bihar

Tender For supply of civil construction materials in rajgir zoo safari. - stainless steel sections of different sections , 304 grade , mild steel fe 500 grade tor steel conforming to related is codes and relevant bis/irc/morth&h specifications for reinforcement in rcc. (tata, sail,vizag or shyam steel only) , tmt fe500 -25 mm dia. , tmt fe500 -20 mm dia. , tmt fe500 -16 mm dia. , tmt fe500 -12 mm dia. , tmt fe500 -10 mm dia , tata / tiscon , tmt fe500 -8 mm dia. , civil construction materials , a) coarse sand (nardiganj sand) , b) local fine sand for filling , c) local good earth for filling in lawn & garden , graded stone aggregate conforming to is codes and relevant bis/irc/morth & h specifications (from domchach) , a) 20 mm nominal size (from domchach) , b) 10 mm nominal size (from domchach) , designation 100 a bricks conforming to is codes and relevant bis/irc/morth & h specifications , fly ash bricks conforming to is codes and relevant bis/irc/morth & h specifications , ordinary portland cement (o.p.c. 43 grade) of ultratech, ultratech premimum, acc, lafarge only. , portland pozzolana cement (p.p.c) of ultratech, ultratech premimum, acc, lafarge only. , portland slag cement (p.s.c.) of ultratech, ultratech premimum, acc, lafarge only. , kota stone 600 mm x 600 mm x 30 mm , kota stone 300 mm x 300 mm x 30 mm , vitrified floortiles 800 mm x 800 mm (kajaria/johnson/somani/nitco) , vitrified tiles 600 mm x 600 mm (kajaria/johnson/somani/nitco) , ceramic floor tiles 300 mm x 300 mm (kajaria/johnson/somani/nitco) , ceramic wall tiles 300 mm x 300 mm x 10 mm (kajaria/johnson/somani/nitco) , 18 mm thick polished granite stone , z-black polished rajsthan , z-black flame finish rajsthan , ms structural steel sections i/e flat, angle, tee, i section, h-section, z-section, square-section bar etc. steel joist, steel channel, steel angles, steel flats and square bars etc. (conforming to is codes and relevant bis/irc/morth&h specifications) (tata, sail,vizag or shyam steel only) , mild steel hollow tubes (mild steel hollow sections conforming to is codes and relevant bis/irc/morth & h specifications) (tata, sail,vizag or shyam steel only) , interlocking c.c.( cement concrete) white paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, interlocking c.c.( cement concrete) coloured paver , 80 mm thick m35 grade tested, 60 mm thick m35 grade tested, moorum 5 to 10 mm koderma, gsb grade-1 , colour coated profile sheet , 0.50 mm (+0.05%) tata, wall putti jk/ birla, cement primer asian paint/ burger paint /nerolac and equivalent brand, premium acrylic smooth exterier paint , plastic emulsion paint , enamel paint

CTN :39079774

06 Feb, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of m.s. plate 3 mm. thick, r.s. joist 250 x 125 mm. and r.s. joist 200 x 100 mm., as per is 2062 for unit iv & v esp and pa fan duct supportsnote :1. d.d. towards postal charges for obtaining enquiry by post shall be drawn in favour of se/p&a/ttps payable at tirunelveli.2. prospective bidders may get the specification free of cost by down loading from websites. tnpgcl www.tangedco.gov.innic https://tntenders.gov.in/nicgep/apptender opening (electronically) :o/o. the superintending engineer/p&a/ttps tuticorin.(executive engineer/mm/ttps)

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government

State Government