M S Round Tenders

CTN :44225830

27 Mar, 2026 39.69 Lacs

Mangalagiri - Andhra Pradesh

Tender For supply of dental consumables under rate contract for a period of 02 years - instruments sterilization kit (small), instruments sterilization kit (medium), instruments sterilization kit( large), gutta percha holding tweezers, protaper finishing files niti files, orthodontic trainer/ easy braces, multi angled scalpel handle, floss holder, intra oral photographic mirror pedo size, intra oral photographic mirror adult size, dental probe, dental explorer, teeth / teeth model, root canal treatment model, jack screw with handle (small & large), chip blower with metal tip, cotton rolls readymade, cotton roll dispenser, molar tube without buccal tubes (plain upper & lower), molar tube with single hole buccal tubes (plain upper & lower), molar tube with triple hole buccal tubes (plain upper & lower), side vent irrigation needles (27/80 gauge), retreatment endodontic rotary files (21mm & 15/20 size), finishing files (x1, x2, x3, x4,x5) protaper next (21mm length), rotary files kedo-sg blue u1 pack (16mm), gutta percha cutting scissors, endodontic ultrasonic tip, endodontic rotaryfiles hy flex edm (set of 6), c+ endodontic files (set of 6), endo ice (bottle), m2 files 4% tapper, 21mm size 10 (set of 6), protaper gold rotary files (x1, x2, x3, s1, s2 ), dual cure resin for fibre post, silane coupling agent, ortho one titanium mini screw (1.6mm l(6,8,10mm)) & 2.0mml (6,8,10mm), skyce tooth jewellary, edta irrigant solution, dental tweezer stainless steel, dental mouth mirror with handles anti fog (size 5), dental mouth mirror with handles anti fog (size 6), dental mouth mirror with handles anti fog (size 7), orthodontic separators, orthodontic modules/o-rings, open coil springs (niti constant force), closed coil springs (niti constant force), buccal tubes stainless steel (1,2,3 hole upper & lower), orthodontic bandable buttons(stainless steel), lingual cleats (stainless steel), band seater (metallic & autoclavable), glass beads for glass bead sterilizer (2.5mm), metallic frazier suction tips (3,4,5 fr), agate spatula (non sticky), cement mixing metallic spatulla, spoon excavator (metallic & autoclavable), ball burnisher (metallic & autoclavable), dappen dish, disposable bite block (autoclavable assorted sizes small to large), blow torch with wick, sprit lamp with wick, stain remover, bur holder box (autoclavable), mackintosh sheet (500mm x 920mm), fissurotomy bur, pit & fissure sealents, intraoral camera sleeves (plastic & disposable) pack of 1000, full chair disposable sleeves, dental tray cover/tray tops, fluoride application tray, gingi dam, shade guide, oxidezed regenerated cellulose, bone wax, black braided silk, feracrylum ointment, fluoride gel, caries dissolving agent, dental floss, endo block/ruler, metallic scale, transmetal cutting burs, autoclavable endodontic boxes, bur chuck, ceramic etchant gel, ceramic primer, metal etchant gel, metal primer, articulator, allograft, tricalcium phosphate + hydroxyapatite, 3-way syringe tips, drainex, disposable bib clips, prophylaxis cups, 701 carbide bur, 702 carbide bur, 703 carbide bur, edta 17% solution, zinc phosphate, wedges, formocresol, collagen membrane, flowable composite, bulk fill composite, suturing needle, imf/ orthodontic elastics (3.5 gauge), tooth bleaching agent, airotor lubricant spray, irm, enzymatic cleanser solution, rmgic, fibre splint, arch bar, ss wire (24g & 26g), alginate, modelling wax, surgical aspirator tips inch & 1/16 inch, disposable tumblers, sodium hypochlorite surface disinfectant (2.5%), bupivacaine 0.5%, hp 6 round carbide bur, hp 8 round carbide bur, tray adhesive, rim lock tray, impression compound, denture relining material, sand paper, sand paper mandrill, acrylic trimmer stone, acrylic trimmer metal, dental stone trimmer, polishing buff, lathe stone, pumice powder, dental plaster, die stone iii, die stone iv, cold mould seal, self cure powder, self cure liquid, full teeth set, head gear with fac

CTN :43185263

10 Mar, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras bid to ras corrigendum : supply of , blade hack saw 12x1/2 (300mm x width 13mm x pitch 1.4mm), wrenches key hex a/f size 7/64 inch, tool kit, spanner 3/8x7/16, tube flexible grease gun hand (pnh3004), fuse key, marline spike 12, files squire smooth 86-in. handle no.3, chisel cold flatcarbon steel 16mm.octa 16mm length150mm, chisel cold nickel steel half round nose 10mm, saw back tenon 14 11 tpi.(335mm), cutter pipe three wheel type 3mm-25mm, punch wad 1 / 4 6mm, punch cutting tinman hallow size 1/4x4-1/2x7/16 octagonal, punch smith wad 16mm, plier circlip external straight up to 3, gauge micrometer depth, tape sounding 10mtr length, punches round taper 3 / 4 with rod 20mm, punches round taper, spanner open jaw de fixed spearhead 15 degangle of jaw nom, spanner box 3x1 ba, spanner deoj 44x50, spanner open jaw plated size 12x14mm, cup wire brush 60 mm hss for 5 angle grinder, grinding wheel for angle grinder 7, 5 angle grinder, 101 piece mechanic tool set, chipping hammer hit, rivet pop gun, 7 angle grinder, hammer drill, electric grinder, 2-speed all purpose drill, wrench,impact,electric, cordless grinder, cut-off saw, punch wad 1 / 2 hallow, grease gun body hand operated, seal lead cross, chisels cold flat carbon steel 25mm, chisels firmer 26 mm. complete with handle no. 6, saw blade hack hand hard coarse 300 mm pitch 1.4 mm, saw blade hack hand hard fine 300 mm, screw drivers 460 mm width of point 20 mm o/l-710 mm, screw drivers philips hd 100 mm cross point fluted handles, screw drivers philips hd 80 mm cross point fluted handles, wrenches pipe 350 mm capacity 40 mm, wrench alnen key 7/16x4-3/4 wrench key for internal hex7/16, wrenches key hex a/f sizes 5/16 inch, wrench key hex a/f size 1 / 2, wrenches key hex a/f sizes 5/8 inch, wrench 10 self grip straight nose, extractor spanner 7/8-1 stud removing, tommy bar for tubular box spanners dia 3/8 lg 6, tommy bar no 2x3/16x4 5mmx100mm, tommy bar no 6x 5/8x10 15.5mm x 250mm, bar tommy no7, screw driver engineers 100 mm width of point mm, screw driver new perfact 165mm pt 11mm, spanner tubular box de 18mm x 19mm., handle socket spanner ratchet type neversible 318x6, plier shipe nose 8, spanner adjustable normal size 300mm, wrenches key hex a/f sizes 3/8 inch

CTN :44137442

25 Mar, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of ffa items on rc basis - fire fighting suit consisting of jackets, trousers, helmet with visor, neck drop, boats and gloves in m.s. storage chest, mmd /irs approved, jackets, trousers, helmet with visor & neck drop, boots, gloves, self contained breathing apparatus consisting of back plate with harness belt, pressure gauge, low pressure alarm, apollo face mask with demand valve and 3 cylinders (1+2 spare) life line with snap hook helmet and fire axe in ms storage chest, mmd/irs approved, /ec type approval, cylinder, face mask with demand valve, back plate with harness, pressure gauge, low pressure alarm, smoke helmet fresh air (bellow type) breathing apparatus consisting of foot bellow, face mask, 60 ft. air hose, harness belt, fire line with snap hook, helmet, fire axe in m.s.storage chest mmd/irs approved, face mask with 22" flexible breathing tube fitted with coupling, air hose 60 ft. with coupling, double action foot bellow made from genuine leather, safety harness belt, insulated fire axe with rubber handle mmd / irs approved, safety helmet fibre glass with adjustable head band and leather chinslip conforming to is 2925 & dgms approval sa/5/72, safety lamp mmd/irs approved, battery charger for above safety lamp. 230 volts, 4 watts, stretcher made of tough canvas supported by wooden slate - mmd /irs approved ec type approved, fire hose, length 20 m, dia: 2 inch, mmd approved, fire hoses dia=64 mm, l=20 m (mmd approved), fire hose canvas rubber lined 2.5" (65mm dia) mmd/irs approved, fire hose coupling 2.5" (65mm dia) instantaneous type mmd approved, fire hose with coupling 65mm dia 18.5 mtrs. length hose with instantaneous type,mmd /irs approved, fire hose jet nozzles 2.5 inch instantaneous type mmd / irs approved, fire hose jet nozzles 2.5 inch instantaneous type mmd/irs approved coupling is 2.5 inch (64 mm) & jet is 12 mm, foam inductor nozzle with instantaneous male coupling (suitable for 65 mm fire hose) with mmd approval test certificates, fire hose jet cum spray 2.5 inch instantaneous type mmd /irs approved, fire hydrant 2.5 inch. instantaneous type mmd/irs approved, fire hydrant rubber seals, female coupling for fire hydrants upper end inner dia: 74 mm, lower end inner dia: 64 mm, rubber gasket o-ring for 65mm dia hydrant coupling, fire bucket round bottom duly painted isi quality, fire extinguishers mechanical foam type mmd/irs approved (afff), 50 ltrs. capacity, 9 ltrs. capacity (afff), 50 ltrs. capacity, 9 ltrs. capacity, fire extinguishers co2 water type, mmd / irs approved, 9 ltrs/kgs.. capacity,, 6.5 ltrs/kg capacity, 4.5 ltrs/kg capacity, 2.0 ltrs/kg capacity, 9 ltrs/kgs.. capacity,, 6.5 ltrs/kg capacity, 4.5 ltrs/kg capacity, 2.0 ltrs/kg capacity, fire extinguishers dry chemical powder type mmd / irs approved of following, 5 kg capacity, 10 kg. capacity, 50 kg capacity, 5 kg capacity, 10 kg. capacity, 50 kg capacity, foam applicator, hose for 20 litres foam applicator, nozzle for 20 litres foam applicator, coupling for 20 litre foam applicator, foam compound, s o p e p kit complete mmd/irs approved as per marpol regulation, oil spill degreaser/dispersant, 200 ltr cap plastic drums with locking facility, rubber bucket, absorbtent sheets (pads) for sopep oil moping, scoops for sopep, vacuum type sopep pumps, cap 16 ltr irs approved type, protective clothing for sopep, absorbent materials, s o p e p outfit -as per marpol regulations, trouser, jacket, apron, hand gloves, shoes, helmet with front glass, face mask, life line for fire man outfit approved type, fire hose storage box 540 mm x 460 mm x 4 mm

Central Government/Public Sector

CTN :44383135

30 Mar, 2026 67.09 Lacs

Dhubri - Assam

Tender For supply of sitc air terminal rod of parallel clamp to connect of minimum d 8mm l 500mm air termination rod , sitc of minimum 8mm roof conductor , sitc of roof conductor holder for metal roofs with a stst clamping piece round standing seam roof conductor holder for metal roofs for fixing additional air termination systems , sitc of universal connector for interconnecting roof conductor and down conductor , sitc of clamp for connection to steel or metal constructions , sitc of down conductor holder stst for of minimum rd 8 to 10 mm h 20 mm with female thread m8 preassembled with plastic base complete as required , sitc of glue dispenser of minimum 490gm complete as required , sitc of gi flat of minimum 25 x 6mm for termination to earth pit complete as required , sitc of uni disconnecting clamp with intermediate plate for round and flat conductor , sitc of gi strip holder complete as required , sitc of copper bonded rod with low carbon steel , sitc of lightning strike counter for digital recording of impulse currents , sitc of cui conductor the dangerous area of touch and step voltages for living beings is defined , sitc of conductor holders for installing the cui conductor on walls or facades , sitc of 3 phase or type1 plus 2 kema certified lightning current and surge protection device at mains lt panel , sitc of lightning equipotential bonding isolating spark gap according to 100 ka

CTN :44383225

20 Mar, 2026 NA

Bhojpur - Bihar

Tender For providing of vehicle hiring service - per vehicle-day basis - suv/muv; 2025, 2024; local; plain; 120kms x 12hrs; round trip,vehicle hiring service - per vehicle-day basis - suv/muv; 2025, 2024; local; plain; 120kms x 12hrs; round trip,vehicle hiring service - per vehicle-day basis - sedan; 2025, 2024; local; plain; 120kms x 12hrs; round trip

CTN :43990192

11 Mar, 2026 NA

Ahmedabad - Gujarat

Tender For bid to ras supply of led batten (q2) , mcb - miniature circuit - breakers for a. c. operation as per is / iec 60898 (part 1) (q2) , led luminaire (recessed luminaire) (v3) conforming to is 10322 (part 5/section 2) (q3) , led bulkhead light (q3) , led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5) (q3) , led lamp 9 watt 230 volts complete , led lamp 18 watt 230 volts complete , led street security light fitting 25 watts , led mirror light light fitting integral slim led batten , post top lantern light fitting of capacity 1x7 or 8 watts , led post top lantern light fitting 35 watt capacity , pvc or dk thermoplastic cable junction boxes ip 66 , led security light fitting 70 watts smart light fitting , highbay luminire of capacity 150watt , taking down old light fitting i e tube light fittings , supply and fix street or security light bracket made out of 25 mmdia , supply and fix clamps made out of ms flat steel , supply and fix bracket for post top lantern , supply and fix decorative hot dipped galvanised mild steel , supply and fix pvc cable glands suitable for ug cable 4 or 6 sqmm , fixing only led tube light fitting integral slim led batten 20 watts , fixing only led lights fitting 1x 10w watts , fixing only recessed mounted led panel light 2 ftx2 ft size 36 watts , fixing only led lights fitting 1x 10w watts bulk head fitting , fixing only led street or security light fitting 25 w , fixing only led fitting round shape 15 watt , fixing only led mirror light light fitting integral slim led batten 9 watts , fixing only post top lantern light fitting of capacity 1x7 or 8 watts , fixing only led post top lantern light fitting 35 watt , fixing only pvc or dk thermoplastic cable junction boxes , fixing only led security light fitting 70 watts , fixing only led flood light fitting 100 watts , fixing only led highbay luminire of capacity 150watt , fixing only mcb sngle pole 6 amp 10 ka ) /bid number: gem/2026/b/7121536 * /dated: 12-02-2026 & & / bid document1 / 34

CTN :44136731

11 Mar, 2026 NA

Bhuj - Gujarat

Tender For bid to ras bid to ras supply of lt power cable , led tube light fitting 4 feet , mccb 4p 415v 400 a , mccb 4p 415v 320a , slim recess mounted light fitting , mccb 4 p 200a 35ka 415v , mccb 4 p 415 v 250 a , storage type electric water geyser , led tube light fitting 2 ft 10w , xlpe lt power al , led street light fitting 45w , xlpe lt power cable , led flood light fitting 150w , led flood light fitting 120w , led flood light fitting 200 w , pvc unarmoured alum cable , led flood light fitting 300w , mccb 4 p 100a 25ka 415v , led flood light fitting 100 w , xlpe lt cable , pvc unarmoured , led lamp 7 w , onload changeover switch 63a 415v 4p , onload changeover switch 100a 415v 4p , mccb 4 p 415 v 400 a , mccb 200a 36ka , mccb 4 p 415v 320a , mccb 4p 415v 250a , pvc conduit 20mm rigid type , led street light fitting 60w , power contactor 40a mnx 40 , power contactor 80a mnx 80 , power contactor 250a , led round flame proof light 60w , flame proof switch lm6 , flame proof socket lm6 ) /bid number: gem/2026/b/7211468 * /dated: 20-02-2026 & & / bid document1 / 35

Co-operative

CTN :44370745

18 Mar, 2026 3.02 Lacs

Gurgaon - Haryana

Tender For supply of ss 304 material - 3134391, 360.000, this material required for tanker reception area in process department.*angle,ss304, 40x40x5 mm.*make : jindal ,polished*unit :kg mtr., 3316993, 200.000, *ss 304 round base plate 150*8 mm.*hole-4.size 16 mm.*pcd ;130 mm.*make : jindal.

Co-operative

CTN :44370747

18 Mar, 2026 3.69 Lacs

Gurgaon - Haryana

Tender For supply of ss 304 items - 3166505, 300.000, *ss 304,polished,standard.make : jindal,, 3052261, 10.000, *ss 304,polished.make : jindal., 3052258, 10.000, *ss 304,polished,make :jindal, 9914093, 100.000, ss 304 round base plate,polished,*size :150mm*150mm,-4 hole,hole size:14 mm,pcd:110mm*make : jindal.

State Government

CTN :44334387

19 Mar, 2026 12.01 Lacs

Panchkula - Haryana

Tender For annual maintenance contract of fire fighting and fire alarm system installed in regional office bldg, panchkula including providing three skilled person for operating the system on shift basis round the clock for a period of 01 years.

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

Co-operative

State Government