Man Power Tenders

State Government

CTN :44007627

18 Feb, 2026 9.83 Lacs

Mandi - Himachal Pradesh

Tender For supply of lubricating/hydraulic oil for bassi power house, hpsebl jogindernagar distt mandi hp 175015

Central Government/Public Sector

CTN :43986664

18 Feb, 2026 1.34 Crore

Delhi - Delhi

Tender For providing of temporary power cables, panels on hire basis at bharat mandapam, new delhi for one year.

Central Government / Public Sector

CTN :44008819

27 Feb, 2026 3.89 Crore

Trivandrum - Kerala

Tender For providing of hiring of third-party inspection agency - oil and gas; rate contract for engagement of third party inspection/certification agency for supervision services at various construction sites under cochin divisional office; refer tender documents,hiring of third-party inspection agency - oil and gas; rate contract for engagement of third party inspection/certification agency for supervision services at various construction sites under cochin divisional office; refer tender documents,hiring of third-party inspection agency - oil and gas; rate contract for engagement of third party inspection/certification agency for supervision services at various construction sites under cochin divisional office; refer tender documents,hiring of third-party inspection agency - oil and gas; rate contract for engagement of third party inspection/certification agency for supervision services at various construction sites under trivandrum divisional office; refer tender documents,hiring of third-party inspection agency - oil and gas; r

Central Government / Public Sector

CTN :44008420

23 Feb, 2026 NA

Vadodara - Gujarat

Tender For providing of customized amc/cmc for pre-owned products - 9030c25d65 providing expert supervisory services for health check up and breakdown maintenance of hydraulic coke cutting system of dcu at gujarat refinery; as per ssc-t; annual maintenance contract (amc); a..

Central Government/Public Sector

CTN :43989230

05 Mar, 2026 NA

Kozhikode - Kerala

Tender For supply of procurement and installation of lan and network points c c -24 port l2 manageable web manageable access switch with 4xsfp ports , poe manageable switch , patch panel loaded 24 port , 6 port loaded liu , patch cords 0. 5 meter , i o box full set , keystone faceplate rj45 , keystone, faceplate rj45 for existing trunk , ip camera , 4x4 junction box for ip camera , nvr , surveillance hard disk 2 tb , patch cords 2 meter , cat6 utp cable box , pvc casing and capping 2. 5cm x 1. 2 cm , pvc casing and capping 100x 50 mm , wi-fi access point 2. 4ghz and 5ghz , 9u wall mountable rack loaded with 5 port power socket , labour charges

Central Government/Public Sector

CTN :44003755

05 Mar, 2026 49.64 Crore

Krishnarajapuram - Karnataka

Tender For providing of obhs and related service for railways (new version 2.0) - supply of man power for carryout the obhs activities; internal; toilet, berths/seats, window glasses, vestibule area, panels & roofs, coach floor area, door area, toilet washing, toilet drying..,obhs and related service for railways (new version 2.0) - supply of chemicals and other non-manpower component for obhs activities; internal; toilet, berths/seats, window glasses, vestibule area, panels & roofs, coach floor area, door area, toilet wa..,obhs and related service for railways (new version 2.0) - lumpsum for epf and leave payment; internal; toilet, berths/seats, window glasses, vestibule area, panels & roofs, coach floor area, door area, toilet washing, toilet drying, mirror, washing l..,obhs and related service for railways (new version 2.0) - gst at 18 percent; internal; toilet, berths/seats, window glasses, vestibule area, panels & roofs, coach floor area, door area, toilet washing, toilet drying, mirror, washing line, pantry; int..

State Government

CTN :43982252

24 Feb, 2026 98.34 Lacs

Chandigarh - Chandigarh

Tender For providing new furniture items in library at punjab vidhan sabha - supply of 8 seater reading table (2350 x 1150 x 740) having following specificationsproviding and placing work table of size 2350 mm (w) x 1150 mm (d) x 740 mm (h). worktop shall be made of 25 mm thick mdf one side pre-laminated board conforming to is:14587:1998 with 0.4 mm pvc membrane pressed on top and having chamfered edges, with access panels provided with soft-closing hinges. understructure shall consist of a combination of 25 mm and 18 mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with anodised aluminium alloy 63400-wp profile added at bottom edges for improved aesthetics; construction shall be of knock-down type. wire raiser shall be made of 0.8 mm crca ms conforming to is:513, epoxy polyester powder coated (dft 40 60 microns) for carrying wires and cables, with cutout provision below access flap at two locations for standard 8-module anchor roma, and additional cutouts with plates shall be provided beside each for mounting audio visual cables (e.g. hdmi, vga-a, etc.). this product should be certified by greenguard, iaq gold, greenpro and griha. as per sample selected, supply of book rack (1200w x 595d x 2078h) having following specificationsproviding, supplying and placing bookracks with body side panels, frame and cross l-brackets made of 0.8 mm crca sheet conforming to is:513. the assembly shall consist of 2 tie rods, 4 fixing brackets and 2 turnbuckles, with tie rods of 4 mm diameter ms arranged in x shape and fixing brackets made of 2 mm thick crca sheet conforming to is:513. wooden panel shall be 25 mm thick plt board of e1-p2 grade with edges machine pressed with 2 mm thick pvc lipping glued with hot melt eva adhesive. understructure shall be made of 0.8 mm crca (is:513) of size 1200 mm (w) x 595 mm (d) x 80 mm (h) for single body. shelves shall be 10-bend panels made of 0.8 mm crca sheet (is:513), placed on shelf supports and fixed using nut and bolts from below, consisting of 6 loading levels formed by 5 adjustable shelves for each main and add-on unit, each shelf with uniformly distributed load capacity of maximum 80 kg. construction shall be completely knock-down type. all ms sheet metal and frame components shall be epoxy polyester powder coated to a minimum thickness of 45 microns. add-on units shall be stackable widthwise to form a bank of racks with common side panels up to 4800 mm width. shelves shall have back stiffeners at the rear side made of 0.8 mm thick crca (is:513) acting as separators. label holder shall be aluminium extrusion of 596 mm length fitted on the front of body, with 300 gsm matt finish paper insert of 596 mm length. book separators shall be made of 2 mm thick crca sheet (is:513), serving as partitions and supports for vertically placed books. this product should be certified by greenguard ,iaq gold . as per sample selected, supply of reception desk (2400w x 725d x 740h) including drawer unit on both sides and pedestal having following specifications supplying and placing in position reception table of size 2400 mm (l) x 725 mm (d) x 740 mm (h), the work surface shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with access flap and grommet provided for wire management. wire management shall include a power box made of 0.8 mm thick crca sheet conforming to is:513 with switch plate provision of 8+3 module anchor roma, fixed along the worktop width at access flap position. modesty panel and side skirting shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990 with 2 mm thick pvc lipping. understructure shall be made of 18 mm thick pre-laminated twin board of e1-p2 grade, edge-banded with 2 mm thick pvc lipping. top shelf shall be of 18 mm thick pre laminat

corporations/Associations/Others

CTN :43905929

20 Feb, 2026 3.00 Lacs

Ooty - Tamil Nadu

Tender For corrigendum : engaging of additional manpower as per the instructions of dd vide letter no ce plg rc ea f man power 2025 dated 17.11.2025 memo. no. dd ea f.man power summer 2026,dt.28.01.2026 for quick restoration of power supply during summer 2026

corporations/Associations/Others

CTN :43905933

20 Feb, 2026 3.00 Lacs

Ooty - Tamil Nadu

Tender For corrigendum : engaging of additional manpower as per the instructions of dd vide letter no ce plg rc ea f man power 2025 dated 17.11.2025 memo. no. dd ea f.man power summer 2026,dt.28.01.2026 for quick restoration of power supply during summer 2026

corporations/Associations/Others

CTN :43903068

20 Feb, 2026 3.00 Lacs

Ooty - Tamil Nadu

Tender For corrigendum : engaging of additional manpower as per the instructions of dd vide letter no ce plg rc ea f man power 2025 dated 17.11.2025 memo. no. dd ea f.man power summer 2026,dt.28.01.2026 for quick restoration of power supply during summer 2026

By Cities

By States

By Agencies

By Ownerships

By Sectors