Painting Work Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Central Government/Public Sector

CTN :44901113

24 Apr, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of snap lock without key material lock and nut zinc alloy die cost with surface finishing crome painted, having lenth 31.5mm spring loaded camp operated by push button grounding by single sided grounding nut by using finger pull the dimension (s) & h decrease by 2mm its mechanical cycle should by 10000 cycle and snap lock will have smooth movement without any rattle sound jerk and vibration. as per rdso spec no. rdso/pe/spec/ac/0184-2015 (rev 0) or rdso letter no. el/7.1.108/mssbc dt. 17-09-2021 (make- dirak, southco, darshana, arihant) [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44779123

16 Apr, 2026 5.71 Lacs

Delhi - Delhi

Tender For a/r & m/o in buildings in education wing during 2025-26. sub head :- distempering and painting work in navyug school darbhanga lane under education wing.

Central Government/Public Sector

CTN :44900573

09 May, 2026 NA

Bhavnagar - Gujarat

Tender For corrigendum : supply of synthetic enamel exterior finishing,ready mix paint for icf coaches, colour-apricot yellow to shade ral-0708040 conforming to is:8662/2024 (third revision) and rdso amendment no. 1 (revision. 0) for pigment content as an additional requirement to is: 8662/2024 with additional requirements of icf/md/spec.-045 issue status: 02, rev. no.-03 dt.24/06/2007 [ warranty period: 12 monthsafter the date of delivery ]

State Government

CTN :44886167

30 Apr, 2026 13.00 Lacs

Jhabua - Madhya Pradesh

Tender For white washing, colour washing, distempering and painting of district court building, (main building, boundary wall, gram court building, library room, bar room) under pwd sub division alirajpur division alirajpur.

State Government

CTN :44874444

16 Apr, 2026 8.84 Lacs

Krishna - Andhra Pradesh

Tender For annual maintenance of buildings-providing coloring, false ceiling, repairs to doors and replacement of electrical wiring and fittings at rc chamber in the premises of a.p. bhavan, new delhi

State Government

CTN :44833271

20 Apr, 2026 50.00 Lacs

Jalore - Rajasthan

Tender For close graded gsb material as pert table /400 a , aggregates 45 mm to 2.8 mm , aggregates 6 mm nominal size , stone crusher dust finer then 3 mm with not more than 10% passing , 0.075 sieve , cost of water , padla/kekar/jhaara , mortar/mud mixture , kiln lime for lime masonry work , cement , ppc , white cement , fine aggregate , sand/gravel , gravel-local , rakhi (fly ash) , surkhi , stone dust (in masonry) , ballast stone/brick (for other than road work) , 40 mm measuring stone (hand-broken grit) (voids cut 1/11) , 40 mm grit stone (crushed) (voids cut 1/11) , 20 mm grit stone (crushed) , 12/10/6mm grit stone (crushed) , brick mortar , material for road work (including 5 km lead) , 63-40 mm crusher crushed stone road (voitus cut 1/11) , 63-40mm hand-broken stone rod (voids cut 1/11) , 90-45mm hand-broken stone rod (voids cut 1/11) , quarry rubbish (voids cut 1/6) , gravel (voids cut 1/6) , kankar (voids cut 1/6) , binding material (pi 4-6) (voids cut 1/6) , up to 5 km , 5 km to 10 km additional fare per km. , 10 km to 20 km additional per km. , for distances above 20 km, additional charges per km will be levied. , laying of gravel, karkar, quarry rubble and coarse aggregate in thickness less than 15 cm (without crushing) in the prescribed camber and grade of the road, spreading and pressing with roller of 8-10 ton weight, tamping and all charges including water charges and hire charges of tools and machinery. , g25nun 7.50 cm) , first class , second class (under class) , soling/ kharja masonry tiles , chinnai derha (rr) , masonry remains (cr) , kharja soling (for floor work up to 15cm height) , kharja soling (23 cm height for road/kharja work) , jodhpur type stone slabs/bows/slabs (length 2-3', height 10-12', thickness 25-35") , flaky material (3-4" thick & length and width 1-2") , sandstone (dpc, sill, coping, lintel, tand, almirha etc.) , up to 25 mm thickness , up to 25-40 mm thickness , up to 40-50 mm thickness , up to 50-75 mm thickness , up to 75-100 mm thickness , up to 100-150 mm thickness , paving stone , floor slabs upto 35 mm thick, min. 3 sqft or more area , katla for patti patan 60-75 mm, min. 3 sqft or more area , unpolished rough kota stone , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , polished kota stone (one side polished) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble stone (makrana adanga 20 mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , marble chips , marble powder , marble stone (rajnagar ii quality / local_20mm thick) , up to 900 sq. cm. , 901 to 2300 sq. cm. , more than 2300 sq. cm. , stone frame , single pattern size 100 x 75 mm. , double paitam size 125 x 75 mm. , stone slabs , up to 1.5 m length, minimum 40 mm thick , 1.5 m to 2.40 m length, minimum 50 mm thick , 2.4 m to 3.0 m length, minimum 65 mm thick , above 3.0 m length, minimum 75 mm thick , precast tiles / blocks , glazed size-30x45 cm , mosaic size-40 mm thick , vitrified size-60x60 cm , cheekered tiles size-30x30 cm , interlock tiles/brick/block for road work , cement interlocking block m-30 grade, 60 mm thick , cement interlocking block m-30 grade, 80 mm thick , cement interlocking block m-30 grade, 100 mm thick , local wood with fittings (for doors, windows and furniture) , acacia , other (teak) , factory made doors (30 mm thick, solid core single pane) , structural steel , iron (or steel fe 415/500 for reinforcement) , winding wire 18 gauge , iron guard , conical iron / square rebar / leaf / angle iron , barbed iron wire (size 12 gauge wire and 12 gauge strad/12 gauge wire and 14 gauge strad/14 gauge wire and 14 gauge strad) , forged , iron mesh (24 gauge, 14 mesh) , cement concrete lattice sky patal 40mm thick , glass , 3mm thick glass , 5mm thick glass , color paint , inamil paint , distemper (water bound) , lime - for whitewashing (aras / bud) , primer (for iron/wood) , exterior paint , plastic paint , cement paint , petroleum products , diesel hsd

Central Government/Public Sector

CTN :44884001

23 Apr, 2026 3.61 Lacs

Dakshina Kannada - Karnataka

Tender For supply of naval store and ars items e e - paint terracotta red , paint silver , paint signal red , paint roller 9 inch , paint roller 7 inch , paint roller 6 inch , paint roller 4 inch , paint roller 12 inch , paint rfu finishing exterior synthetic dark grey

Central Government/Public Sector

CTN :44882466

27 Apr, 2026 5.00 Lacs

Thane - Maharashtra

Tender For repair of gi charpoy, steel furniture and certain wooden furniture including repainting, recanning and polishing of omq, smq and otm accn at af stn kanheri hills under ge (af) thane

Central Government/Public Sector

CTN :44629345

22 Apr, 2026 25.00 Lacs

Hyderabad-T - Telangana

Tender For corrigendum : repairs polishing to certain types of wooden steel trade pattern furniture and painting to steel furniture at cdm otm complex under bso of ge (n) secunderabad - repairs/polishing to certain types of wooden, steel,trade pattern furniture and painting to steel furniture at cdm otm complex under bso of ge (n) secunderabad.

By Cities

By States

By Agencies

By Ownerships

By Sectors