Pipes And Fittings Tenders

Central Government/Public Sector

CTN :45306043

20 Jun, 2026 40.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

Central Government/Public Sector

CTN :45517035

02 Jul, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of mig welding torch 3 meter long rating 400/405 amp. , copper tip for welding torch dia-1.6x28-m8 for mig filler wire of diameter 1.2mm , copper tip for welding torch dia- 2.0x28-m8 for mig filler wire of diameter 1.6mm , copper nozzle cap for mig welding torch (model: 36kd) , air cooled straight or conical gas nozzle cap, material copper for gmaw welding torch model: psf

Central Government/Public Sector

CTN :45516675

30 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of reducer; lt; c/car; pd-co-01310/r1/p 1 to26; material no: 2005246

CTN :45369164

20 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of fail freeze double acting smart positioner with accessories for unit 1 sadc and other area for bktpp - double acting positioner with hart additional data as per sectiuon iv, item description, smart electro-pneumatic positioner additional data as per sectiuon iv, item description, smart positioner. make: ytc ytc additional data as per sectiuon iv, item description, ss304 fittings & accessories ( 1> straight connector male for 6 mm od tube : 200 nos 2> nipple 4" length, 15 nb, " bsp threaded one side, ss304 qty. 10 nos. (positioner jb air supply through hose connection) 3> fittings, connector, male, " nptm x 6 mm od tube, ss 304qty:200 no 4> fittings, connector, " ferule and nut for ss 1/4" tube qty. 200 nos. 5> fittings, connector, " ss seamless tube union qty. 200 no. ), ball valve size 1/2 ",screwend,ss for air line manually operated ( screwend,ss for air line manually operated. ball valve size 1/2 " ,screwend,ss for air line manually operated (size-1/2 inch ) ball valve size 1/2" ,screwend,ss for air line manually operated,class-150,moc-body:-astm a 351 gr.cf8(ss304),ball & stem:-ss304,seat,body&stem seal:- tfe(teflon),handle & stopper plate-ss, make :ksb/hydair/parker/l&t, 3-piece ball valve as per attached annexure-i ), air filter regulator,1/4in,norgren norgren b73g-2ak-qd1-rmg,0.3-10 bar ( or equivalant model of norgren/smc / plaka/veljan as per attached annexure-i ), hydraulic hose 3m,wire braided 2sn dn10 din20022/en853/sae 100r2at,length: 3 mtr,max pressure: 330 bar,both end fittings 1/2" bsp ( hose, hydraulic hose, wire braided, 2sn dn10 din20022/en853/sae 100r2at, length: 3 mtr, max pressure: 330 bar, both end fittings " bspt. inner tube of oilresistant synthetic rubber, two wire braids reinforcement, oiland weather- resistant synthetic rubber cover, temperature withstanding capacity upto 120 degc as per attached annexure-i ), hose,flexible,ss # 1/4" x 1500 mm - scp13016 ( 1.5 meter flexible bellow hose with 6 mm od tube and fittings with coupler for ss tube connection. as per attached annexure-i )

CTN :45228481

23 Jun, 2026 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of cctv system along with accessories regarding security surveillance of railway crossing point at chp area, technical building along with maintenance bay, guard pond, bakreswar dam, caaqms at tapaspur and township area. - materials, bullet camera, ip, ir, varifocal ( 4 mp bullet cameras. ir min. 50 mtr or higher sd card slot, ip66 or better, ik-10 or better, varifocal lens. ), 32 channel nvr, 8 sata interfaces, ( raid supported, 1 esata interface, 2 lan ports, hdmi, vga ports, usb ports ), surveillance hdd 8 tb, wall mount networking rack,19in,size:6u ( wall mount networking rack,19 inch,size:6u with pdu(6/16 amp), 2 fans,1 cable manager, hardware nuts 2 packets. any reputed make ), liu,rack mount,12 port ( 12 port liu loaded, rack mounted, sm, sc ), 8 port gigabit smart managed poe switch ( with sfp, 8+2, power budget 120w or more ), sfp module for ethernet network switch ( sfp/gibic module (sm). same make of network switch ), pigtail sc sm 1m for ofc networking ( pigtail sc sm 1m for networking ), patch chord,fibre optic sc-lc type ( ofc patch chord sc-lc sm 2m ), connector rj45, stp, cat 6 ( rj 45 stp connector (100 nos. box) ), plug socket,15a,250v,3 pin anchor ( composit flash piano key type switch socket unit,4 fixing holes additional data: electric socket set with mcb (15amp) ), dp,mcb,6 a ( 6 amp mcb ), hdpe pipe ( isi marked, grade: pe100, is code: is4984-2016 )

CTN :45538750

18 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For a/r & m/o lwss challahal dishti, under jsv section mandri sub-division sunni, tehsil sunni, district shimla hp (sh: deployed of manpower for operation of pumping machinery i/c watch & ward, minor repair of schemes such as providing and fixing of various dia fitting i.e. g.1 socket, union, tee brass full way wheel valve etc. one coat of white washing snow cem in all civil structure, cleaning of storage tanks, brush cutting & removal of slips around the civil structure, welding of rsing main of all schemes, repair of panel board, starter main switch in this estimate complete with all respect to entire- satisfaction of engineer-in-charge.)

CTN :45530040

04 Jul, 2026 NA

Khammam-T - Telangana

Tender For supply of 40mm (nb) erw pipe, plain ends in standard length as per is-11961 , 8" dia 90 degree long elbow, standard: astm a234, sch: 40, gr. wpb, bw, non ibr, dimension: ansi 16.9 , 8" dia to 6" concentric reducer, as per annexure-a.

CTN :45527879

22 Jun, 2026 63.3 Thousand

Delhi - Delhi

Tender For supply of fan belt eicher canter , fan belt tata xenon , fan belt swaraj mazda , handle regulator eicher canter , hand brake cable swaraj mazda , accelerator cable swaraj mazda , handle door inner swaraj mazda , head light bulb 12v , head light bulb 24v , horn assy swaraj mazda , ac filter ciaz , wiper blade with arm ashok leyland , door glass regulator swaraj mazda , door trim swaraj mazda , spark plug tvs , battery lead eyelets , hose pipe rediator , terminal set , buzzer , flasher unit electrical 12v , flasher unit electrical 24v , wind shield water sprinkler , tail light assy swaraj mazda , reverse switch , handle l outfit door outer swaraj mazda , primary air filter for tata xenon , lub oil filter for tata xenon , fuel filter water separator tata xenon , fuel filter main tata xenon , assy hand brake cable tata xenon , clutch and brake pedal cover eicher canter , steering cover for ashok leyland , steering cover for tata vehicle , rubber cover brake clutch pedal for tata , steering cover for light vehicles , steering cover for swaraj mazda , steering cover for eicher canter * /bid number : gem/2026/b/7655424 + /dated: 12-06-2026 ' ' / bid document 1 / 26

CTN :45516874

22 Jun, 2026 NA

Unnao - Uttar Pradesh

Tender For switch industrial 2.5 0.25inch ,dp055061 , wt 24 2x 400 diffuse sensor ,sick , pencil inductive sensor , gd m.c head lower bell , neauprene seal,hydrotesting unit , l bend for filling gun , gd.pt ms sliding bush , screw for pneumatic cylinder , supporting rod ss 40x300 for gd.pt , ss locking bush for clamping rod , pneumatic cylinder shaft 50x160 short thread , pneumatic cylinder shaft 50x160 long thread , v belt a 66,b62,b66 antistatic , pneumatic cylinder norgren.festo 63x25 , lot adopter , plummer block ucp 212 ntn bearing , vibration rubber damper , upper head brass for antennae valve ,norgren , manual sealing gun , antennae valve ,norgren , wd 40 spray , thread locker , 40x400 and 40x400 cylinder guide rail , lens for optical fibre z017400 , coil for metalwork valve , pu seal for gd lower bell , optical fibre cable,sick , push button air valve ,pneumax , spring for centering gun , allen csk bolt 6x50mm,10x30mm ht tvs , chain lock make diamond , pneumatic cylinder shaft 50x80 short thread , roller clamping arm for gd and pt , hot air sealing gun straight type , base of gd ,central section ms , ht bolt 8x40 mm,8x75mm , hexagonal bolt with nut and washer 10x40mm , nut bolt with washer 12 x40 mm , hexagonal bolt with nut and washer 16x75mm , antennae wire , vision unit antennae rod , flameproof sealing unit sensor , yoke plate , clp rd sds drill bit hammer 6x160,12x260,16x350mm , it hss drill p.s 8,10,12 mm , welding electrode 3to 15mm ,manglam , seal kit ck 95 40 , teflon roller with dual bearing , flexible coipling 16x1to 5 ,for introduction unit , pt gun bottom ss head to 6 hole of 8 mm , sensor cable to 1,3,5,7,10mtr , allen csk bolt 0.5x2mm ht tvs , wheel for carousel , welding rod ss to esab make , reflector to white , load cell cable mk 4 , load cell cable to check scale , ss wheel to telescopic boom , mounting for gd cylinder , nylock nut to 6,8 ,10mm , ms anchor fastener 16x150, 12x150 , frl 0.5 inch , pneumatic single pilot valve 2.5 , clamping guide ms block , linear bearing , guide rod ejection unit,introduction unit , conveyor bend teflon , seal kit 50x160 to norgren , elbow connector, size 0.25inchx4mm , elbow connector,size 0.25inchx6mm , elbow connector,size 0.25inchx8mm , elbow connector,size 0.125inchx4mm , elbow connector,size 0.125inchx6mm , elbow connector,size 0.125inchx8mm , elbow connector,size 0.5inchx8mm , elbow connector,size 0.5inchx10mm , elbow connector,size 0.5inchx12mm , reducer,pu, size 6to 4mm,8to 4mm , reducer,pu, size 8to 6mm , reducer,pu, size 10to 8mm , reducer,pu, size 12to 8mm , connector,straight, size 4x4mm,8x8mm , connector,straight, size 6x6mm , connector,straight, size 10x10mm , connector,straight, size 12x12mm , t connector,size 4x4x4mm , t connector,size 6x6x6mm , t connector,size 8x8x8mm , t connector,size 10x10x10mm , t connector,size 12x12x12mm , wll24to 2x430501 ,optical sensor , pu tube 10mm and 12 mm , pu tube 8 mm , pu tube 6 mm , pu tube 4 mm , hot air sealing gun baliga and flameproof type , pressure gauge 2inch ,0to 10 kg per cm2 micro , pressure gauge 4inch ,0to 10 kg per cm2 micro //bid details 2 / 113 , pressure gauge 2inch ,0to 28 kg per cm2 micro , pressure gauge 4inch ,0to 28 kg per cm2 micro , pressure gauge 2inch ,0to 16 kg per cm2 micro , pressure gauge 4inch ,0to 16 kg per cm2 micro , pressure gauge 2inch ,0to 21 kg percm2 micro , pressure gauge 4inch ,0to 21 kg per cm2 micro , pressure gauge 6inch ,0to 21 kg per cm2 micro , pressure gauge 2inch ,0to 42 kg per cm2 micro , pressure gauge 4inch ,0to 42 kg per cm2 micro , temperature gauge 4inch ,0 to 200 degree celsius micro , pressure gauge 6inch ,0 to160 kg per cm2 micro , vacuum gauge 4inch ,0 to760 mm per hg micro , hose parker 2000mm 0.5 inch , hose parker 2000mm 1 inch , hose parker 900mm and 1000mm 0.5 inch , display cuc mark iv , keypad rubber type mkiv , magnetic sensor pneumatic , cap hammering head with white teflon , carousal drive belt anti static , pressure switch flp smart tech , mechanical tool m

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector