Get complete information related to latest Rack Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rack Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rack Tenders.
Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize
Tender For purchase of furniture items for government ayurved college, kota - executive chairsspecification as per tender documents, officer furniture specification as per tender documents, office tablespecification as per tender documents, office chairspecification as per tender documents, library table (8x4) with chairsspecification as per tender documents, racks 5-steps specification as per tender documents, visitor chair specification as per tender documents, almirah with glassspecification as per tender documents, racks 3-steps specification as per tender documents, dari (khadi)specification as per tender documents
Tender For corrigendum : dismantling of existing mast and racks of elevator erection/commissioning of elevator with new spares at crusher house-1 and 2 ntpc sipat
Tender For corrigendum : supply of chairperson conference unit digital as per sr no 1 of technical specification , delegate conference unit digital as per sr no 2 of technical specification , audio power controller or digital conference or discussion system- controller as per sr no 3 of technical specification , mixer amplifier as per sr no 4 of technical specification , rack as per sr no 5 of technical specification , digital smart mixer or digital audio processor as per sr no 6 of technical specification , hdmi distribution amplifier or splitter as per sr no 7 of technical specification , seamless switcher as per sr no 8 of technical specification , usb extender kit as per sr no 9 of technical specification , hdmi extender kit as per sr no 1 0 of technical specification , cables and connectors as per sr no 11 of technical specification , installation and minor patch cables and programming as per sr no 12 of technical specification
Tender For supply of model of centrifugal clutch assembly , cut section working model of diaphragm clutch assembly , demonstration board of electronic ignition system, ignition coil , demonstration board of mpfi system , disk brake in working condition with caliper assembly with all parts , drum brake assembly in working condition , full floating axle and semi-floating axle assembly , functional/experiment model of different type of sensors , steering assembly 1. rack & pinion 2. worm & roller 3. recirculating ball 4. power steering 5. electr , synchronous gear box with stand for dismantling and assembly , tandem master cylinder with booster working model , tubed tyre of car, trucks & motorcycle , tubeless tyre of cars & trucks , tyre& split rim wheel assembly , working model of power windows , working model of torque converter model of lmv , arbor press hand operated 2 ton capacity , diesel engine crdi - 4 strokefor dismantling and assembling with swiveling stand. , diesel engine ( running condition) stationary type single cylinder , hydraulic jack hi-lift type , multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer , spring tension tester manually operated with analogue , working condition of diesel engine crdi - 4 stroke engine, assembly with fault simulation board , diesel engine six cylinder in running condition , air bag simulator , air conditioning service unit (car) , four stroke petrol engine with cng setup- working condition , heavy commercial vehicle , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , petrol engine(2-stroke) motor cycle/scooter along with special tools , transfer case with stand for dismantling and assembly , tube/ tyre vulcanizing machine , two post car lift capacity 4000 kg , tyre changer machine , working condition of petrol mpfi engine assembly with fault simulation board , logic probe , test light , angle plate adjustable 250x150x175 , angle plate size 200x100x200mm , anti theft device , battery terminal cleaner tool , car stereo , circlip pliers expanding and contracting type 15cm and 20cm each , distributor -duel advance type, reluctance type , drill point angle gauge , electrical horn ( different types) , glow plug tester , high rate discharge tester (cell tester) , holders, lamp teakwood boards, plug sockets, solders, flux wires and cables batteries round consuma , magneto spanner set with 8 spanners , marking out table 90x60x90 cm. , portable headlight aiming kit , soldering copper hatchet type 500gms , spanner clyburn 15 cm , spark lighter , spark plug spanner 14mm x 18mm x size , straight edge gauge 2 ft. , straight edge gauge 4 ft. , taps and dies complete sets (5 types) , telescope gauge , air conditioned mpfi vehicle with auto transmission and accessories , air conditioning trainer kit , alternator assembly used for lmv , demonstration board ignition system, ignition coil , demonstration board of crdi system working model , discrete component trainer / basic electronics trainer , electronic engine control module , memory keeper / battery backups , starter motor axial type, pre- engagement type & co-axial type , trolley type portable air compressor single cylinder with 45 liters capacity air , ultrasonic injection cleaning equipment , wiper motor assembly , battery charger capable to charge batteries from 5ah 150ah , fuel injection pump ve pump / distributor fuel rotary pump (dpc) pumps / along with special tools an , grease gun heavy duty trolley type 10 kg capacity , automotive oil pump for dismantling and assembling , spark plug spanner 14mm x 18mm x size long bit for alto/800 , starter motor axial type, bid details/ 2 / 63 pre-engagement type & co-axial type , turbocharger cut sectional view latest wgt type to show turbine, impeller and compressor wheels. , tyre pressure gauge with holding nipple , cut section working model of single plate clutch assembly , trolley type portable air comp
Tender For corrigendum : supply of ammunition racks - tech spec for armrack for 7.62mm caliber machine guns n accs as per gsl ta w ta 1258 413800 01 rev.002 , tech specs for armrack for 7.62 mm caliber rifles n access as per gsl ta w ta 1258 423200 01 rev.002 , tech specs for armrack for 9mm caliber short rifles n access as per gsl ta w ta 1258 421600 01 rev.002 , tech specs for armrack for 22mm caliber rifles n access as per gsl ta w ta 1258 426000 01 rev.002 , tech specs for rack for bayonets to 7.62mm caliber rifles as per gsl ta w ta 1258 429900 01 rev.002 , tech specs for rack for bayonets to short rifles n access as per gsl ta w ta 1258 425700 01 rev.002 , tech specs for rack for boxes with 30mm ammunition n access as per gsl ta w ta 1258 444500 01 rev.002 , tech specs for rack for salute ammunition as per gsl ta w ta 1258 405500 01 rev.002 , tech specs for storage rack for 5 boxes with 30mm ammunition as per gsl ta w ta 1258 462200 01 rev.002 , tech specs for rack for small arm ammunition and accesoories as per gsl ta w ta 1258 405700 01 rev.002 , tech specs for srgm ammunition rack n accessories as per gsl ta w ta 1258 422500 01 rev002 , tech specs for rack for dummy torpedoes and accessories as per gsl ta w ta 1258 440500 01 rev.002 , blow off safety plate as per gsl ta w ta 1258 434500 01 rev.001 , igla locker locker i8 as per gsl ta w ta 1258 409000 01 rev.001 , pyro cabinet and accessories as per gsl ta w ta 1258 449400 01 rev.001 , racks for igla and accessories as per gsl ta w ta 1258 446000 01 rev.001 , tech specs for srgm ammunition rack n accessories as per gsl ta w ta 1258 422500 01 rev 002