Screw Tenders

Central Government/Public Sector

CTN :39417820

01 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of punched washer a-18 (for bolt or screw size m16) specification no: to is 2016:1967, fir st revision (reaffirmed:2021,incorporating 04 amendments) - table-2, steel [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38889011

03 Mar, 2025 NA

Mathura - Uttar Pradesh

Tender For corrigendum : rmrm245064_supply of turbine spares - list of item(s) / work(s) as per tender documents, screw cap,p/n:bsh-h12035,st,tur,ebara,, bushing,p/n-a692784-2, pin,p/n:e8653552-5,st,tur,ebara,sbheg4-4, fitted bolt,p/n-e8652606-16, connector,p/n-b682893-3, locknut,anr-a08, lever pin,p/n-b647052-3, retaining ring,p/n-rtw-k019, link,p/n-a637072-3, retaining ring,p/n-rte-k080, hex nut,p/n-fn-b16x1.5,sbheg4-4,ebara, rod end bearing,p/n-p1562r333, rod end bearing,p/n-p1562r313, actuator,p/n-c236254-75,sbheg4-4,ebara, screw jack,p/n-stb-a12110,st,tur,ebara,, bracket,p/n-e8651332-10,sbheg4-4,ebara, steam chest assy,p/n:e8620510-314, vlv & stem ass,p/n:b711182-7, valve guide,p/n-b654550-3, governor valve seat,p/n-a711168-3, o-ring set,p/n-c236254-100, adjust screw gasket,p/n:c236254-106, bolt-heater,p/n:e8681057-9

Central Government/Public Sector

CTN :39402697

12 Mar, 2025 NA

Patna - Bihar

Tender For supply of job repair - led bulb 9 watt , 3-pin top , geyser 20 usha , geyserrepairing , exhaust fan , switch anchor , led tube light ,socket anchor , fan condernser havells , fan regulator ,ceiling fan usha , bell switch anchor , batten holder , doorbell , mcb 32 amp havells , modular plate 8 model , modularplate 6 model , modular plate 4 model , modular plate 2model , modular switch 10 a , modular socket 10 a , modularbell switch , pvc tape , copper wire 2.5 mm , copper wire1.5 mm , copper wire 01 mm , copper wire 0.75 mm , pvcgulli 1.5 inch , gypson screw 1.5 inch , wash basin , bibcock tap , basin tap , angle cock , bathing shower , steeljali , pvc cistern natraj , kitchen sink steel , waste pipe ,looking glass mirror , commode , tank cover , jet spray ,brass ball cock set , casket powder , connection pipe ,cpvc thread elbow , socket cpvc , cpvc plain elbow , cpvc socket , taplon tape , cpvc solvent , gi elbow , gi socket ,tee cpvc , gi tee , nipple gi , fta cpvc , mta cpvc , suta, cpvc pipe , pvc gulli , chinese nail , chinese nail , steelscrew , pvc saddle double lock , white cement j.k. white ,m seal , gi pipe , emulsion off white 20 litre , emulsionwhite 20 litre , flat brush eagle , bata paper , j. k wallputty , sand paper water proof , fibre blade , enamel paintbrown , thinner , terminator , dent protection , sone sandred sand , toilet door , room door , bathroom door ,kitchen window , bathroom window , window class ,window net , plywood 12 mm , toilet window , roomwindow , wall mirror , steel door kundi , toilet pan , tape ,door stopper , water tank cover , wash basin mirror ,wash basin pipe , cement ultratech , white tiles , whitecement

Central Government/Public Sector

CTN :39402594

12 Mar, 2025 NA

Delhi - Delhi

Tender For supply of muslin , pattern making sheet , machine oil , trausor fabric , hand needles assorted , poplin , white cotton fabric , teflon shoe 2128 , jacket fabric , cotton cambric 40s or 60s , shoulder pad , lining lignt color , dpx5 , juki hook set , thread guide juki-5530n , magnet guide , jacket fusing , geader pressure s-918 p-5, p-50 , consealed pressure foot , teflon foot , telfon feeddog , needle screw , pressure foot screw , juki needle plat screw , juki knee lifter , juki pressure cap , juki standkilly , bobbin binder tension , juki bobbin binder tension rod , hamming foot 1by4 and 1by8 , bottom folder 1 by4 , mangent light for juki manice , clutch pencils .5 .7 , a3 cartidge sketchbooks , eraser big good quality , pen drive 64 gb , juki needle plate , juki feed dog

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government/Public Sector

CTN :39408142

27 Feb, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of hex head bolt m20 x 100 high tensile as per is:1364 (part-1)/2002,ce-with prop erty class-10.9 to is:1367 (part-3)-2002,coating as per mdts-057. and the item should be pr ocured from tvs, unbrako, tuff, dfl and rdso approved sources of axle end high tensile cap screws [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39418583

20 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of hex head screw m16x120 high tensile as per is:1364 (part-2)-2002, ce-with prope rty class-10.9 to is-1367(part-3)-2002, coating as per mdts-057. and the item should be proc ured from tvs, tuff, dfl, unbrako and rdso approved sources of axle end high tensile cap screws. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39417129

04 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For set of fasteners for under slung water tank of lhb coaches, one set consist of 03 items (1) stai nless steel hex head screw m12 x 60 as per is:1364 (part 2 -2018) tab. 1, a2-70 to tab. 2 of is:1367 (part. 14 /sec1): 2018, qty- 01 no./set. (2) ss nyloc nut m-12 as per is:7002-2018, a2-70 to is:1367 (part14 / sec 2) , qty - 01 no/set. (3) plain washer a14 as per is:2016-1967 tab.2, type-a, aisi-304, qty - 02 nos/set. specifie d torque value for each item must be 67 nm. accepted make- tvs, tuff, dfl and unbrako only (note- sam ple to be approved before bulk supply) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39407799

19 Mar, 2025 NA

East Singhbhum - Jharkhand

Tender For rate contract for supply of spares for vasa pumps - vasa pump spares, (a)spares for vasa 284-100 type pumpbearing housing assembly, part no. : 101848-2, casing (ci), part no.: 92742-a, casing liner, drive end & non drive end cover, part no. 92757-a & 92756, gland, gland housing, part no.: 211787-1, inlet, moc : c.i., part no.: 92745-a, lantern ring, part no.: 101618-4, o ring, pump casing ( hi crome), part no.: 109859-m1, rubberised impeller, rubberised inlet, screw cover, shaft sleeve, part no.: 180403-2, shaft, lock washer 954128, lock nut 954177, washer 180095-1, deflector ring 92755a, distance ring, part no.: 180631-1, frame, 101679-m1, (b)spares for vasa 302-50 (rl) type pumpstuffing box, p.no. 211930, shaft sleeve 148200-4, gland, part no.: 214205-m1, lantern ring 110144-1, shaft with bearing housing, shaft with lock nut washer n key 180628-m1, bearing housing 148186-1, bearing housing cover( de)148188-1, bearing housing cover( nde)148187-1, slinger 148189-1, rubberised impeller, rubberised inlet, deflector ring, casing (rubber lined) part no: 198259, (c)spares for vasa g-120-334-100 type pumpcasing, moc: hi-chrome (ni-hard) p.no.109859-m1, frame lower part, p.no. 157720-m1, inlet lining, hi-chrome, p.no. 92745-a, shaft 148092-1, bearing housing 93788-a, bearing housing cover(de)93789-a, bearing housing cover(nde)93792-a, deflector ring 93791-a, spacer ring/distance ring 115472-1, (d)spares for vasa 336-100 type pumpbrg. housing 101655-2, brg. housing cover (drive) 92739a, brg. housing cover (imp)-92728a, casing liner, casing, pt. no. 93713 (ci), difletor ring 92727-a, distance ring (2nos) 180630-1, frame assembly (with upper clamps) 101656-m1, gland 92723-a, gland housing 211788-1, impeller screw cover, inlet c.i. 92715-a, inlet casing liner, lantern ring 101664-1, lock washer 954132, lock nut 954181, o ring (nat. rubber), id-701 mm, od-77 mm, dia-3.5 mm, pump casing, pt. no. 110018 (hi crome), rubberised impeller, shaft, shaft sleeve 180401-142, (e)spares for vasa 459-200 type pumpbrg. housing 101702-2, brg. housing cover (drive end), 93843, brg. housing cover (imp. end), 93842, casing (hi chrome) with stud & nut pt. no. 93887, deflector ring, pt. no. 93844, distance ring, pt. no. 180632, gland 93845-a, gland housing (stuffing box), m-713/g, lantern ring, 148247, lock nut 954187, lock washer, rubberised impeller, rubberised inlet, screw cover, shaft, shaft sleeve, 180461-m2, frame. 101701-m1, (f)spares for vasa hdt 455-100 pumpbearing housing 1-101655-2, casing liner, p.no. 1-310208-b, cover impeller end 3-92728-a, cover pulley end 3-92739-a, deflector ring 4-b22-208, distance ring, p.no. 4-202270-1, gland, p.no. 2-202369-m1 sp, impeller, p. no. 1-b22-459-m2, inlet lining, p.no. 1-310209-m2, lantern ring, p.no. 3-202370-1, o ring 953098, sealing ring, p. no. 4-202271-1, sealing ring, p.no. 3-198455-1, sealing ring, p.no. 4-198443-1, sealing ring, p.no. 4-217657-1, sealing, p.no. 2-310206-m1, sealing, p.no. 3-310430-m1, shaft 1-b22-460-mi, shaft sleeve, p.no. 3-b22-320, wear plate, p.no. 1-310210-m2, (g)spares for vasa hdt 507-150 (hc) type pumpbearing housing cover (de), p.no. 2-93843-a, bearing housing cover (nde), p.no. 2-93842-a, casing lining (hc), p.no. 210240-2, deflector ring, p.no. 93844-a, distance ring, p.no. 180632-1, gland housing, p.no. 202295-1, lantern ring, p.no. 148247-1, lock nut, km18, p.no. 954187, lock washer, mb18, p.no. 954138, o ring, dia 72.5 x 3 thk, p.no. 953185, oil seal (00 120 x 1095 x 12 thk), p.no. 950075, sealing ring, p.no. 211682-1, sealing ring, p.no. 3-148280-2, sealing ring, p.no. 3-b22-207, sealing ring, p.no. 4-210243-1, sealing ring, p.no. 4-210244-1, shaft complete, p.no. 1-b22-744, wear plate (hc), p.no. 210421-m2, bearing housing 148326, shaft sleeve 180461-m2, follower, 215209-m1, ring, 202308-m1, stuffing box c.i., (h)spares for denver pump size - 6" x 6"liner rubber moulded, gland side, liner rubber moulded, suction side, srl denver insert & impeller, (i)sp

By Cities

By States

By Agencies

By Ownerships

By Sectors