Screw Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38589625

03 Jan, 2025 6.14 Lacs

Delhi - Delhi

Tender For supply of battery connector assy,battery plug assy,eye guard assy,og cover,diopter ring,focussing knob,clicker assy,on off knob,screw pan head xrec m2x4

Central Government/Public Sector

CTN :38604238

20 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of set of ht hex screw with nut, plain washer, spring washer galvanised half threaded s ize m10 x 75 thread in 30mm grade 8.8 make lps/tvs/unbrako or equivalent. one set consists of 1 n o. hex head screw, 1 no. nut, 2 no. plain washer and 1 no. spring washer. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :37406218

30 Dec, 2024 NA

Panipat - Haryana

Tender For corrigendum : metachem make dosing pump spares - , worm shaft,p/n- r1, drive shaft,p/n- b2,, crank ,p/n- t27, connecting rod ,p/n- r9/r12,, spacer ,p/n- b7, thrust ring,p/n- t12, complete pump,metachem,mc-3r, guide pin ,p/n- t26, oil seal ,p/n- r8,, cross head pin ,p/n- r13, c/s hd screw /crclip ,p/n- r14, oil seal ,p/n- r15,

corporations/Associations/Others

CTN :38518814

31 Dec, 2024 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of 65mm dia gi pipe screwed and socketed medium grade confirming to relevant is specification 1239 , 65mmx65mmx65mm dia gi tee as per isi standard , 65mm dia gm gate valve as per isi 778 , 65mm dia gi union socket as per isi standard , 65mm dia gi nipple 6inch length as per isi standard , 65mm dia gi coupling socket as per isi standard , 65mm dia gi plug as per isi standard , 80mm dia gi pipe screwed and socketed medium grade confirming to relevant is specification 1239 , 50mm dia gi pipe medium grade confirming to relevent is specification is 1239 , 80mmx80mmx80mm dia gi tee as per isi standard , 80mmx80mmx50mm dia gi tee as per isi standard , 80mm dia gi union socket as per isi standard , 50mm dia gi union socket as per isi standard , 80mm dia gm gate valve as per is 778 , 50mm dia gm gate valve as per is 778 , 80mm dia gi nipple 6inch length as per isi standard , 50mm dia gi nipple 6inch length as per isi standard , 80mm dia gi coupling socket as per isi standard , 50mm dia gi coupling socket as per isi standard , 50mm dia gi bend as per isi standard , 50mm dia gi plug as per isi standard , synthetic enamel paint , m-seal 250 grms

corporations/Associations/Others

CTN :38519134

31 Dec, 2024 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of 80mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 8.53 kg per metre , 65mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 6.54 kg per metre , 50mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 5.10 kg per metre , 80mm dia gm gate valve heavy duty , 80mm dia gi union socket , 80mmx80mmx80mm dia gi tee , 80mm dia gi bend , 80mm dia gi coupling socket , 80mm dia gi elbow , 80mm dia gi nipple 6 inch lenghth , synthetic enamel paint , 80mmx 65mm dia gi reduser , 65mm dia gi union sosket , 50mm dia gi union sosket , 65mm dia gi nipple 6 inch length , 65mm dia gi bend , 65mm dia gi coupling socket , 65mm dia gi elbow , 65mmx 50mm dia gi reduser , 50mm dia gi nipple 6 inch length , 50mm dia gi bend , 50mm dia gi coupling socket , 50mm dia gi plug

Central Government/Public Sector

CTN :38570752

26 Dec, 2024 4.04 Lacs

Mangalore - Karnataka

Tender For providing surge/earthing protection system to chairman bungalow - providing external lightning protection(elp) - supply & installations with:a) 800mm-8mmair termination spike with accessories.b) parallel connector stst (v4a) for rod 7-10mm.c) 8mm round conductor big holder at metal sheet roof, 3mtr,16mm/10mm almgsi air termination rod with accessories-supply & installations with:a) 1mtr,10mmair termination rodb) rod clamp for connecting air termination rods(stst for rod 8-10/rd16mm fsk8.1016skm10x25-v2a)c) 2mtr,16mm almgsi chamfered on both ends air termination rodd) concrete337 circular base 17kg(for air termination rods d-10mm/16mm)e) plastic flat washer d-370mm black for concrete bases-17kgf) connecting clamp for air terminal to roof conductor, 8mm aluminium-magnesium alloy round conductor-rd8/almgsi-with ss holder-supply& installations:a) 8mm aluminium-magnesium alloy round conductor-rd8/almgsi, supply & installation:-8mm round conductor ss holder, supply & installation -8mmround conductor holder for wall& parapet stst with cover plate, supply & installation 8mm round conductor holder-fate roof tile, supply & installation 8mm round conductor holder-tile ridge, supply & installation of connecting sleeve (zdc for rd 8mm with 4 screws m6x10mm), supply & installation of universal cross connector stst, supply & installation of test clamp-round conductor to strip connection, supply & installation of stainless steel 10mm earth conductor, supply & installation of universal cross connector stst, supply & installation of 3mtr,17.2mm copper bonded (ul listed) earth rod with backfill material & accessoriesa)copper bonded (ul listed) earth rod 17.2mm dis, 3000mmlong, 250 micron - 1rodb) terra 20kg fulgurites free backfill material-1bagc) stainless steel earth rod connecting clamp-ss316-1clampd) rcc earth pit chamber 340mmx340mm (frame & cover)-1no, supply & installation of surge protection device(spd)reputed makea) vap dva csp3p100fm combined lightning current &surge arrestor type 1+ type 2 (3ph+n circuit)-installation place: main eb incoming).b) ngate-dga gfftv-combined arrestor: installation place-cable/sattv

Central Government/Public Sector

CTN :38604714

26 Dec, 2024 NA

Prayagraj - Uttar Pradesh

Tender For supply of hydraulic special purpose screwed ram integral jack with safety lock nut, cap-40 to n, as per bis:4552-2(1993) & attached specification. make- hydro pack, iner pack, vankos, bemco or lukas. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38258908

23 Dec, 2024 NA

Warangal-T - Telangana

Tender For corrigendum : supply of internet lan materials - sc pigtails single mode , single mode lc-lc patch cards- 3mtrs , single mode sc-lc patch cards , single mode sc-sc patch cards , information outlets - cat 6 , rj45 jack modular plug type , face plates dula port , face plates - single port , 24 port loaded patch panel , patch cable 1m , patch cable 2m , media converter 1gbps , impact i o punch tool , modular rj45 crimping tool , ofc singlemode cable , power injectors , ofc light , rj 45 tone tester , 25mm pvc pipe white colour , 1 inch casing , 1 and half inch casing , 2 inch casing , 2 inch duct casing , cable stripper flat nose cable cutter , nail hammer medium , cable cutter , casing cutter , cutting plier , screw machine , hdpe pipe 1 and half inch , ofc liu , ofc enclosures , ofc use t-boxes , ofc splicing cutter , aluminium ladder 8ft , 2 mm cable clamps , 1 inch flexible pipe white , 1 and half inch flexible , isoprophyl , 1 inch screws , wood gatties , black zipsun screws 1 inch , bombay nails 1 and half inch , insulation tape box of 30 nos , cable zip ties 200mm , cable zip ties 250mm , cable name tags , spring 30mtrs , 25mm pvc clamps white , axe saw blade

Central Government/Public Sector

CTN :38556420

02 Jan, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For supply of bid for stationary items - attendance register , batteries , binder clips , binding machine , black hit , blade for paper cutter , board pin , bond paper , borosil glasses , bowls , brown tape , bucket , calculator , cardboard file holder , cartridge toner , cello tape , cloth duster , cloth stand , coaster , cobra file , component cleaner , computer keyboard , computer mat , computer mouse , correction pen , diary , dishwash , door bell , door mat , door stopper , double hole punch machine , double sided tape , drawing sheets , dustbin bags , electric extension board , electric kettle , eraser , fevicol , fevistick , file board , file tag thread , foot mat , foot rest , glass cleaner , glossy photo paper , hammer , hand sanitizer , highlighter , index register , index or box file , induction heater , ink bottles , laser pointer , lp bond solvent , masking tape , mosquito repellent , multi-plug , my clear bag , note pad , notice or pin board , paper cutter , paper towel , paper weight , paste it pads , pen , pen drive , pen refills , pen stand , pencil , permanent marker , photocopy paper , plastic folder , plastic jug , plier , register , room freshener , rope , scale , scissor , screw driver set , scrubber , serving tray , sharpener , single hole punch machine , sketch pen , soap , stamp pad , stapler machine , staples , sticky note , sticky notes , sugar , sugar cubes , surf excel , surgical mask , tea bags , tea cups , tea thermos , tissue paper box , transparent folder leaf , u clip , wall clock , water bottle , white board duster , white board marker , white paper envelope , window lock bid number/ ( ( ) ): gem/2024/b/5669359 dated/* : 12-12-2024 bid document/ 1 1 / 87

By Cities

By States

By Agencies

By Ownerships

By Sectors