Seal Tenders

Central Government/Public Sector

CTN :38821856

25 Jan, 2025 NA

Amritsar - Punjab

Tender For tender for supply of cylinder block complete kit with piston ring pin std rtr 160 cc , connecting rod bit rtr 160cc std , valve exhaust , valve inlet , seal valve stem oil , cam chain timing chain , o ring oil filter , oil filter , air filter , set plate clutch drive 05 nos , set plate clutch driven 04 nos , spark plug , oil seal kit , disc clutch pressure , o ring oil stainer , tensioner cam chain , valve guide exhaust side , adjuster assy tensioner , pump assembly oil , gasket clutch cover , gasket magnato cover , gasket exhaust pipe , carburetor assy. , chain sprocket set , pin gear shift lever , lever assy clutch rtr , idle gear bush , indicator rear left , bond tube small grey colour , insulation tape , emery paper fine , old cloth , choke cable assy accelator cable , clutch cable assy

Central Government/Public Sector

CTN :38823355

20 Jan, 2025 NA

Kalka - Haryana

Tender For supply of kit gasket & sealing to elgi part no- 072403419 or equivalent for trc 2507 , details as per annexure a. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38727310

06 Jan, 2025 9.90 Lacs

Alwar - Rajasthan

Tender For supply and fixingopen gym equipment - providing and fixing cross trainer including fitting and fixtures, civil works and required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given belowdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from b class g.i. pipe of different nb. the main frame pipes are of 80nb b class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of 250 mm & 10mm thick. the handle frame is made up of 25nb b class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb b class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.seats, footrests, and endcaps are composed of high-quality lldpe material (anti-uv). anchor fasteners are m10/m12, sbr rubber grips, and bearings are made of ss 304 from skf or an equivalent brand.to build structure bushes are used which are made from m.s.seamless pipe of 60mm od. with 5 mm thickness. the footrests are made from aluminum casting material of size 130 mm x 310mmx5mm thickness and mounted on m.s. plate of size 130mm x 310mm x 3mm thick closing caps are made up of high quality fiber reinforced plastic material. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright . the bearings used are of 6007zz 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly., providing and fixing seated pullar including fitting and fixtures, civil works and required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given belowdimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtrseated puller equipment made up of b class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters the center pipe is of 100nb made from b class g.i. pipe.bottom support is of m.s. round plate of 250 mm & 10mm thickness is welded. all linkages are made up of 25nb b class g.i. pipe.the handle frame is of 32nb b class g.i. pipe.the seat frame is of 32nb b class g.i. pipe, to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush is used.the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb b class. welded with m.s. round plate of 250 mm & 10mm thick. main pipesupported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness.foundation cover closing cap is made from frp material with 0.7 mm thickness. the seats and back rests are fitted on the outer frames are made up of m.s.sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.seats, footrests, and endcaps are composed of high-quality lldpe material (anti-uv). anchor fasteners are m10/m12, sbr rubber grips, and bearings are made of ss 304 from skf or an equivalent brand.closing caps are made up of high quality fiber reinforced plastic material., providing and fixing rower including fitting and fixtures, civil worksand required sand pit filled with approved sand work to be done as per the instruction of engineer incharge and specification given below dimensions: - 1200mm (length) x 1000mm (width) x 920mm. (height) safe area: - 1.5mtr. x 1.5mtr.rower equipment made from b class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimetersthe main frame is of 80nb b class g.i.. pipe welded with m.s. round plate of 250mm x 10mm.the handle frame 25nb is made from b class g.i. pipe.the fo

State Government

CTN :38727311

06 Jan, 2025 9.98 Lacs

Alwar - Rajasthan

Tender For supply and fixing play equipment work - supply and fixing multi seater see saw: rotation molded seats of thickness 60 mmare used in these see saw. it has been provided with bolts to fix it too see saw frame which has a plates of 200x150x5 welded on to the frame. handle has been provded on the frame made up of 20 nb pipe and also conforming to en standards. frame: frame ofmulti seater see saw is designed usig 15 nb 20 nb & 25nb gi pipe and it hasbeen given radis by suitable bending technique. plates hasbeen welded at places were seat has to be installed so that seat can be fixed to the framewith suitable bolting arrangement. multi seater see saw clamp is used in frp see saw so as provide required motion for the see saw ., supply and fixing double swing: as per following specification50b hot dip galvanized swing top pipe of length 2950mm conforming to is 1239 with gi thickness of 60 173-1961 welded at its one ends (tobe bolted over maps swing attachment deck pipe) special swing clams made up of two parts are joined together with m6 allen bolts with s-hook & a specially desighned swing pin. the s hook s specialy desighned to house a bearing for smooth and noiseless swinging. the clamps are made from injection molded nylon-6 plastic. -225mm x 103mm junction box made from 3mm thik., supply and fixing of wave slide 2.1 mtr. : as per following specification ladder frame 25 nb & 20nb frame gi pipe conforming to is1339 part 1 : 1979- hand grip conforming to en 1176-1:1998 (4.2.4.6) ladder step cold formed 16 guage gi plated sheet length 500mm & width 90mm en1176-1:1998(4.2.9.1) conforming to 16 swg gi plated platform of size -500 x450x60 mm , 80 nb hot dip galvanized center support pipe of lenght 2590mm conforming to is 1239 with gi thickness of 60m. frp wave slide thickness 5 mm, ss nut bolts conforming to astm e-1086:1994 - medium h- support, 25 nb gi pipe lenght 1490mm width 10mm tor rod of lenght 300 mm for support & strong foundation small h-support 25 nb gi pipe length 600 mm with 10 mm tor rod of lenght 300 mm for suport & strong foundation detail drawing enclosed., supply and fixing of four seater mgr: as per specification rec.age 3-8 yrs, area 1.5 m dia safe play area 2.5 mtr. dia. the item is having its main frame made up of 25 & 40 mb gi pipes. the stand is made in 80 nb gi pipe. the whole structure is mounted on heavy duty bearing shaft. the bearing used is of heavy duty bearing permanentaly lubricated with water sealant. the seat frame is made in 20 nb gi pipes. the seat attached area made out of molded plastic type in rotational molding process in lldp the seats have handrails so that the child does not fall. it accommodates 4 children at atime., supply and fixing ladder climber : area : 10 x 2 x 7 feet age 3 to 13 years ,vertical support pipe 75 od 3mm wall thickness gi (make ) powder coated with pure polypropeline 60-80 micron thickness climbing structure made up of 31 od wall thickness 3.2 mm gi pipe powder coated with pure polypropeline 60-80 micron thickness horizontal pipe 25 od wall thickness 3 mm gi pipe powder coated with pure polypropeline 60-80 micron thickness. welding type - co2 welding, post welding treated by antirust cold zinc galvanization treatment. all bolts ss 304 with ss 304 nylon nuts, supply and fixing arch swing: area : 10 x 4 x 9 feet | age 3 to 13 years structural support pipe 75 od 3mm wall thickness gl powder coated with pure polypropeline 60-80 micron thickness. top pipe 60 od 3mm wall thickness gi powder coated with pure polypropeline 60- 80 micron thickness swing attached to the top pipe with nylon clamp linked to the chain with ss s hook and chains are plastisol coated. heavy duty rubberized anti skid swing seats. all bolts ss 304 with ss 304 nylon nuts. welding type - co2 welding, supply and fixing sitting merry-go-round area : 5 ft dia age : 3 - 13 years |- footplate: 5 ft diameter hdpe sheet supported by a gi structure comprising 31 od round pipes and 50mm x 5

Central Government / Public Sector

CTN :38783826

11 Jan, 2025 NA

Digboi - Assam

Tender For tender for supply of dpk24s289g procurement of seal spares and cartridge of eagle burgmann make - gasket for sleeve , pn-444.04 , graphite , spacer - m.r. part no.- 342.04 , seal ring assy. ob , pn-100.02 , o ring - mating ring ob , pn-111.32 , o ring-mating ring ob , pn-111.32 , bush , throttle , epil , y15d32 , madc , pn-6 , o ring - seal ring ob , pn-111.22 , complete cartridge seal , b03655aa , mod. seal cartridge , un-698200347 , cartridge assembly , pn - d00466aa , cartridge assembly , pn - d00468aa , sleeve , pn-400.00 un- 3928012691 , collar-seal ring ib , pn-662.01

State Government

CTN :38709196

21 Jan, 2025 3.46 Crore

Ahmedabad - Gujarat

Tender For dismantling of existing and providing, fabricating and erecting of gate leaf assly in 30 x 9 size vertical gate total 34 nos (20 c d u type and 14 a/t type ) and wicket gate with rubber seal, wire rope in a/t gate and chequrred plate in hoist platform of a/t gate and servicing of all pulley of rope and other miscellaneous repairing work in 30 x 9 size counter weight type vertical gate 14 nos etc. complete in vadhavan bhogavo-1 (nayaka) project. (dist:- surendranagar)

Central Government/Public Sector

CTN :38818295

09 Jan, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of set of sealing and fixing rubber for compartment doors to drg. no. cc 56415 alt.-nil & drg. no. cc 56416 alt.-nil, in running length 2510 mm. each for lhb coaches with mcf specification mmdts 20047 rev. nil, issued on 20-10-2021 [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :38818725

17 Jan, 2025 NA

Amravati - Maharashtra

Tender For supply of pipe thread sealing cord in pack of 150 mtr box make of m/s. loctite or m/s. vanloc or m/s. hylomer or similar of specific gravity 1.25 pressure resistance 1000 psi, temperature 130 degree c approved by csa nsf 6 jas-nza 4020 [ warran ty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38487580

16 Jan, 2025 NA

Multi City - Multi State

Tender For corrigendum : supply of gasket(seal set roller clamp cylinder) part no. confirming to plasser: - hz01.063 brand/make: plasser, trelleborg, parker, freudenberg (simrit/cfw), hallite only acceptable.

State Government

CTN :38585740

13 Jan, 2025 NA

Kheda - Gujarat

Tender For supply of various burner spares for bmd-1, 2 & 3 at wtps. - copper asbestos impregneted seal ring for f.o.gun of 210 mw boiler.as per drg.no.wtps/003/03/31 rev.1. , oil gun nipple of bmd -ii , tilt lever locking pin [part no. 27] of nozzle tilting mechanism for burner tilting device , coal nozzle tilting setting and fitting pin for coal compartment assly of 210mw boiler , square head pivot pin with collar and cotter pin of nozzle tilting mechanism? indirect for burner tilting device, 210 mw boiler , shear pin of coal burners & power cylinders (bmdi) , drive lever key , damper lock pin for secondary air damper control system , f o gun clamp with bolt , stiffner type-2 for baffle plate of coal burner tips of cca. , baffle plate (coal) , sleeve size:- dia = 90 mm, length = 150 mm, thickness = 5 mm, material = ss 304 for wall blower of stage 1. , sleeve size:- dia = 128 mm, length = 110 mm, thickness = 5 mm, material = ss 304 for lrsb

By Cities

By States

By Agencies

By Ownerships

By Sectors