Shed Construction Tenders

Central Government/Public Sector

CTN :39915224

25 Apr, 2025 NA

Delhi - Delhi

Tender For sunshade repair & roof treatment of yamuna officers rest house in the section of sse/w/t.camp under aden/e-i.

State Government

CTN :39893662

09 Apr, 2025 8.53 Lacs

Pondicherry - Pondicherry

Tender For urgent repair and micro concreting to the damaged sunshades and arresting leakages in the osd room toilet in the administrative block of electricity department, puducherry iv call

Central Government/Public Sector

CTN :39885108

22 Apr, 2025 2.33 Lacs

East Singhbhum - Jharkhand

Tender For 01 nos borehole at rustomji patel cheshire home sundernagar - drilling of 05 inch dia bore hole , providing and fixing of 5 inch dia pvc casing pipe , supply of accessories 32mm ball valve alto , 32mm non return valve alto , 32mm m.s. clamp to hold pipe , g.i. nipple 32mm , g.i. bend 32mm , bore well cover of size 5 inch , pressure gauge , pvc tape 02 roll taplon tap 10roll mseal 20 pkt. etc. all component , installation charges of pump and above item in position charge , supply of gi pipe including gi union elbow socket reducer of pipe line make jindal or medium size 1 inch dia , size 3 by 4 inch dia , size half inch dia , valve size 3 by 4 inch dia , valve size half inch dia , providing and laying single layer brick flat soling with over brunt picked jhama bricks including preparing and leveling the bed and filling the joints with lcoally available coarse sand after dismantling old one , making platform withside brick wall one side 900 mm height and other three side 200mm for water filling are with anti skid vetrified floor tiles size 300 to 300 and ceramic wall tiles 300 to 150 mm upto a height of 900mm over brick wall for fixing stand point all complete no extra payment will be made for sidebrick wall and drain , providing and applying with synthetic enamel paint two or more coats with approved brand and shade ready mixed paint including primer as directed by manufacture with a monogrammed of ucil and date of repairing. , installation of two hp submersible auto run and stop dc ac pump motor waareodoo wp of stainless steel suitable for minimum one hundred and twenty fve to one hundred and fifteen mm borewell operating head sixty mete discharge rate minimum two thousand lph with lowering upto sixty meter thirty two mm dia upvc schedule eithty column pipe and twenty three point five sqm three core flat submersible cable including monil polucrystaliune pv array nine hundred mounted on suitable direction to optimize panel uses and withstand the wind pressure up to two hundred km ph and mainkg suitable arrangements to operate hand pump manually in the same bore when there is no soler power including five years warranty against defects in materials and workmanship with locking arrangements of switchboard all complete. , installation and fixing of push cock , supply and fitting of hot dip galvanized steel staging composit structure , hdpe water tank isi make 1000 ltrs. capacity with cover & locking arrangement.

State Government

CTN :39833809

15 Apr, 2025 8.12 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : annual rate contract for the enhancement and its allied work for boards vehicles based at gandhinagar. - providing, supplying, making and fitting of seat covers from high quality pu leatherette uv-resistant, dustproof, waterproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring all seat sizes, cutting, applying 12mm to 20 mm high-density soft foam and stitching such seats looks good and accurate finishing and perfect bucket fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.01b: providing, supplying, making and fitting of seat covers from rich-elegant velvet fabric uv-resistant, dustproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring all seat sizes, cutting, applying 12mm to 20 mm high-density soft foam and stitching such seats looks good and accurate finishing and perfect bucket fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.01c: providing, supplying, making and fitting of cotton loose-type seat covers from 100 percent pure cotton towel fabric uv-resistant, dustproof and tear-resistant, bacteria-resistant and antifungal super soft material by opening and dismantling all seats from vehicle measuring all seat sizes, cutting and stitching such seats looks good and accurate finishing and loose fitting seat covers. after fitting the seat covers into seats, open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.02: floor carpet: providing, supplying, making and fitting of floor carpet full flooring from high quality pu leatherette of appropriate thickness, uv-resistant, dustproof, waterproof, heat and tear-resistant and antiskid materials by opening and dismantling all seats from vehicle measuring the floor sizes, making floor carpet by cutting, shaping, sticking leather material a such floor carpet flooring looks good and accurate finishing and perfect fitting floor carpet. after fitting the floor carpet flooring open and dismantle seats to be fitted into vehicle as per original. all above works including all materials, hardwares, consumables and all labour charges. complete in all respect., item no.03a: providing and supplying of standard high quality soft cotton and cushion infused material non slip seat galicha, item no.03b: providing and supplying of non-slip seat galicha made from 100 percent high quality polyester yarn super-soft and machine washable material, item no.04 seat back pocket organizer: providing and supplying of pu-leather back seat organizer with foldable dining table tray, multi pocket storage tablet, bottle and tissue paper holder beige (with tray) inside, item no.05a: providing and supplying and fitting of standard make foldable sunshade uv protection window curtains made from high quality polyester cloth including all fitting accessories like spring, hooks, screws, stick bands. all above with material and fitting charges, item no.05b: providing and supplying and fitting of standard make retractable automatic roller sun shades uv protection window curtains made from high quality polyester cloth including all fitting accessories like spring, buckles, screws, metal hooks and roller stick. all above with material and fitting charges, item no.06a: providing and supplying of removable 7d/8d floor matting of any made from engineered thermoplastic/finest quality leatherette 100 percent waterproof and dust-proof and easily foldable, item no.06b: provi

Central Government And Public Sector

CTN :39899258

21 Apr, 2025 45.63 Lacs

Trivandrum - Kerala

Tender For providing sunshade with structural steel and galvanized iron profile sheets for windows and ventilators at type 5 quarters, jipmer, puducherry.

Corporations And Associations And Others

CTN :39422929

11 Apr, 2025 51.44 Crore

Panchkula - Haryana

Tender For corrigendum : online tender for the rate contract for the supply of dental items to various hospitals of government of haryana for a period of two years for group c - cotton rolls ( small, pkt of 1000 pcs), disposable patient drape sheet 1*1mm, gum paint based on tannic acid, potassium iodide, zinc chloride, glycerine with thymol/ menthol /cetrimide, liquid 15 ml bottle, hybrid composite resin for anteriors (all shades), high strength, long lasting wear resitance, great handling without stick, 4 gm isi/ iso/ce/marked., rubber dam kit adult, box of 152*152 mm, medium rubber dam sheets, 152 mm template, 152 mm plastic dental dam frame, 6-11 clamps pack with clamp holder, rubber dam clamp forcep, rubber dam punch mdr/isi/iso/ce marked, glass ionomer cement- type-ix, high strenth for posterior teeth, chemical setting without shrinkage, strontium based, high flouride releasing, 12 to 15 gm powder and 5 to 10 gm liquid, mdr/isi/iso/ce marked, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel. shade :- pale yellow, shade :- pale yellow, mdr/isi/iso/ce certified /usfda, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel., shade :- yellow brown, mdr/isi/iso/ce certified /usfda, restroative cement type - ii - (15 gm powder & 10 to 13 gm liquid), strontium based, radiopaque glass ionomer with high fluoride release, resistant to demineralization,hydrophylic properties, flouride releasing, high compressive stregth, low solubility, low flexure strength, bonds to both dentin and enamel., shade :- dark grey, mdr/isi/iso/ce certified /usfda, disposable suction tips pkt of 100, mineral trioxide aggregate mdr/isi/ iso/ce/marked., silver alloy non gamma-2 lathe cut alloy, 30 gm vial mdr/isi/iso/ce marked, niti hand files (21 mm) size- 15-40, for curved canals, pkt. of six mdr/isi/iso/ ce marked, pit & fissure sealant ( 6 ml bottle) solution with high flouride releasing, low viscocity, high retention, rapid cure & low solubility. mdr/isi/iso/ce marked/usfda, preadjusted edgewise stainless steel bracket kit containing upper and lower 2nd premolar to 2nd premolar bondable brackets with upper triple and lower double weldable molar tubes and mbt 0.022 prescription, fiber- reinforced splinting material- bondable reinforced ribben fiber-approx 2mm width mdr/isi/ iso/ce/marked., niti rotary files 4% 21mm (pkt. of 6). refill packs of #15,#20,#25,#30,#35,#40 (size to be specified at the time of order), addition silicone impression material (600 ml putty with 2 cartridges of 50 ml light body), air rotor spray isi/iso/ce marked, calcium hydroxide, paste system based and catalyst -radiopaque, 4 gm mdr/isi/iso/ce marked, acidulated phosphate fluoride gel 1.25%(apf), gic luting pkt. of 30-35gm powder, flowable composite 2-4 grams, x-ray processing solution(set of developer & fixer powder, manual, to make 13.5 ltr solution), root canal spreaders pkt. of 6 #15-40 21mm, dental chair covering sterilized cling foil rolls mdr/isi/ iso/ce/marked., mta pkt. of 1gm, tooth preparation kit (set of 14 burs), root canal k files 21mm (pkt. of 6) #15-40, dental amalgam capsules pkt. of 50 capsules, impression compound, gic restorative pkt. of 10-15 gm powder, bleaching kit, diamond burs- various shapes including round, tapered round, flat fissure, pear (size and shape of burs required will be specified at the time of order)- coarse / fine grit. pkt of 5, niti rotary files 4% 25mm (pkt. of 6). refill packs of #15,#20,#25,#30,#35,#40 (size to be spe

CTN :39890440

26 Apr, 2025 NA

Madhubani - Bihar

Tender For purchase/supply on hire of various types of materials used in madhubani district - category 1 - supply of writing material and voting material etc. category 2 - supply of voting related forms, envelopes and other printing etc. category 3 - supply of computers, printers, computer equipment and other electronic equipment. category 4 - supply and installation of tents, awnings, chairs, tables and barricading etc. on rent. category 5 - supply, installation and operation of temporary electrification, loudspeakers etc. category 6 - supply, installation and operation of computer equipment, cctv and videography etc. on rent. category 7 - supply of food, snacks, water, tea etc. category 8 - works related to wall writing/coating etc.

State Government

CTN :39482556

08 Apr, 2025 20.26 Lacs

Kulgam - Jammu And Kashmir

Tender For corrigendum : installation of children playing equipment/fountain at womens /children park kulgam (balance work). - (a) : civil work for (construction of fountain)earthwork in excavation by mechanical means for foundation, trencheing, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. backfilling, compacting in foundation trenches and carriage, providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:2:4) mix including curing, carriage, but excluding form work. (circular bed), a) centering and shuttering including strutting, propping etc. complete including removal of form work.(below ground), b) centering and shuttering including strutting, propping etc. complete including removal of form work.(above ground), reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete., providing and laying gang saw cut of thickness 30 mm , mirror polished pre molded and pre polished machine cut granite stone of required size and shape of approved shade, color and texture laid over 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joints with white cement mix with matching pigment , epoxy touch ups etc. complete as per the directions of eic., providing and laying of matt finish vitrified tile of size (300x300x9.8)mm having water absorption less than 0.5% and confirming to is 15622 of approved make in all colors and shades laid on 20mm thick base of cement mortar 1:4( 1 cement : 4 coarse sand) including grouting bthe joints with white cememt mix with matching pigment , epoxy touchups etc., complete as per the directions of eic., (b): civil work for control panel (8x4)earthwork in excavation by manual means for foundation, trencheing, incl. getting out excavated earth and disposal of surplus excavated eath and includes dressing of sides and ramming of bottom, within a lead of 50m and lift 1.5m all kinds of soil., providing and laying of stone soling (hand packed) incl. compacting in foundation trenches and carriage includes backfilling., providing and laying of cement conc. of specified grade of (1:4:8) mix including curing, carriage, but excluding form work., providing and laying of reinforcement cement conc. of specified grade (1:1.5:3) mix including curing, carriage, but excluding form work., reinforcemernt for rcc work incl. straightening, cutting and placing in position all complete.@50kg/cum., providing and fixing of class b medium duty g.l. pipe (100mm dia, 6mm thick) conforming to is 1239 including welding, fitting elbows, tees flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the ms plate by welding and painting with two or more coats of synthetic enamel paint of suitable shade complete as required., providing and fixing of flange plates (8x8) and 8mm thickness, including welding with gi pipes & drilling holes etc., providing and fixing of foundation bolts type "j" (m20x300)mm, including nuts and washers as required thereof. the job includes providing steel rods of appropriate size to fix bolts properly in concrete., structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by eic.qty @5kg/sft, providing and fixing of ismc:75 channel sections as per the site requirement and approved by eic. the job includes cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as directed by eic., providing and fixing coloured high rib corrugated g. s. sheet (18 swg) roof

State Government

CTN :39794750

18 Apr, 2025 1.50 Crore

Shahdol - Madhya Pradesh

Tender For corrigendum : tender for supply of materials fy-2025-26 - (isi) 8mm, 10mm, 12mm, 16mm (thermo mechanically treated bars (tmt)), (isi) , opc grade 43, (9x4x3) 0 0 13757, (8x4x3) 0 0 13757, ( ) (9x4x3) burnt open strength no less than 25 kg/sq.cm and absorption not more than 20%, 20 mm, 40mm, , , , (isi) 60x60 cmt.vitrified floor tiles multi/double charged (minimum top layer thickness 2.0mm) neno polished self design, in different size with water absorption less than 0.05% and conforming to is:15622 of approved make in all colors & shades, 1st quality/ premium quality., (isi) 30x30 cmt.vitrified floor tiles multi/double charged (minimum top layer thickness 2.0mm) neno polished self design, in different size with water absorption less than 0.05% and conforming to is:15622 of approved make in all colors & shades, 1st quality/ premium quality., (isi) 30x45 cmt.vitrified floor tiles multi/double charged (minimum top layer thickness 2.0mm) neno polished self design, in different size with water absorption less than 0.05% and conforming to is:15622 of approved make in all colors & shades, 1st quality/ premium quality., . . . , . . . , , ,

CTN :39870142

15 Apr, 2025 15.98 Lacs

Peddapalli - Telangana

Tender For providing sunshades to front verandah of nb type quarters at bungalows area, rg-ii area, godavarikhani, dist.peddapalli, telangana state. (invited under earmarked works sccl registered contractors belong to sc community are eligible to participate).

By Cities

By States

By Agencies

By Ownerships

By Sectors