Vehicle Tenders

State Government

CTN :39905644

21 Apr, 2025 11.05 Lacs

Darjeeling - West Bengal

Tender For electrical repairing and renovation work of motor vehicle section at the 2nd floor of treasury building, siliguri, darjeeling.

State Government

CTN :39893697

07 Apr, 2025 4.10 Crore

Ponda - Goa

Tender For construction and installation of various items for government buildings, in the state of goa to create barrier- free environment for persons with disabilities (south goa). - ss studs with carborundum insert of approved colourproviding and fixing ss-304 studs of the approved brand and make, having 35mm dia. and 5mm thickness and a 12 mm long cylindrical plug of 7mm dia. at the centre of the rear side of the stud and the plug to have a notch for adhesive retention. to be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete., ss strips with carborundum insert of approved colourproviding and fixing ss-304 strips of the approved brand and make, of size 280mm x 35mm and 5mm thickness and having minimum 3 nos. 12 mm long cylindrical plugs having 7mm dia. located on the rear side of the strip and the plug to have a notch for adhesive retention. to be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner) including finishing work up to the satisfaction of the engineer in charge complete., pu warning tiles :providing and fixing in place 300 mm x 300 mm polyurethane stick on tactile warning tiles with provision for screwing at corenrs with matching colour screw cap , having beveled edges and tactile elements protruding by 5mm from the base of the tile. the tiles should be of the approved brand, make and colour and be fixed inside the building on all floors in corridors, lobbies , level differences as per accessibility standards and as per the installation instructions given by the manufacturer complete, pu directional tilespolyurethane strips of barrierfree/ equivalent brand of size 300 mm x 300 mm and 5mm thickness with proision for screwing at 4 corners with matching colour cap. to be installed inside the building on all floors in corridors, lobbies level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer, using bondtite/ equivalent brand epoxy industrial purpose adhesive(resin + hardner)/proprietary self adhesive tape including finishing work up to the satisfaction of the engineer in charge complete., providing a s.s. 304 swing grab bar - 700 mm and of dia: 32mm and thickness 1.5mm, of the approved brand and make and to be installed on the rear wall of the wc, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge, providing s.s. 304 l shaped grab bar of size-600mm (h) x 600mm (d) and 32mm dia. and thickness 1.5mm, of the approved brand and make and to be installed at the specified location as per accessibility standards and to be fixed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware as per the direction of the engineer in charge, providing s.steel 304 grab rail (600 mm),32mm dia. and thickness 1.5mm, of the approved brand and make, to be installed vertically at the specified location as per accessibility standards and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge, parking signagedesign, supply, fabrication and fixing of ss 304, non glare signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2

State Government

CTN :39898995

16 Apr, 2025 24.25 Lacs

Unakoti - Tripura

Tender For mtc of rd from kls ranguti road to kls rangauti road via laxmipur l 1.20 km sh patch carpeting, grouting, seal coating, protectn of rd side berm with c.c block pitching, earth filling etc comp during the yr 2025 26

State Government

CTN :39886559

07 Apr, 2025 90.31 Lacs

Noida - Uttar Pradesh

Tender For provide & fixing of road safety item on road between sector-62 and 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar

Central Government/Public Sector

CTN :39901265

23 Apr, 2025 8.28 Crore

Kanchipuram - Tamil Nadu

Tender For supply of supply of door swing operator with articulated arm for single doors and one side of the double doors , itc of door swing operator with articulated arm for single doors and one side of the double doors , supply of single electromagnetic lock with all related accessories as per tender , itc of single electromagnetic lock with all related accessories as per tender , supply of windows server to install access control software with active redundancy , itc of windows server to install access control software with active redundancy , supply of access control management software customized as per tender , itc of access control management software customized as per tender , supply of client pc with license for access control system operations , itc of client pc with license for access control system operations , supply of standalone smart card reader as per tender specs , itc of standalone smart card reader as per tender specs , supply of dotl as per tender including all accessories like bracket etc , itc of dotl as per tender including all accessories like bracket etc , supply of emergency release switch as per tender , itc of emergency release switch as per tender , supply of audio visual local strobe as per tender , itc of audio visual local strobe as per tender , supply of backbox for reader and devices , itc of backbox for reader and devices , supply of cat 6 a cable for access control ip point up to the readers , itc of cat 6 a cable for access control ip point up to the readers , supply of 1 kb mifare smart card as per tender , itc of 1 kb mifare smart card as per tender , supply of 25mm frls 2mm thickness pvc conduit with accessories , itc of 25mm frls 2mm thickness pvc conduit with accessories , supply of server to install cctv software as per tender with redundancy , itc of server to install cctv software as per tender with redundancy , supply of cctv video management software with camera license as per tender , itc of cctv video management software with camera license as per tender , supply of cctv camera as per tender , itc of cctv camera as per tender , supply of storage with raid configuration and backup for a minimum period of 30 days , itc of storage with raid configuration and backup for a minimum period of 30 days , supply of desktop for cctv monitoring as per tender , itc of desktop for cctv monitoring as per tender , supply of 8 port smart managed poe data switch with 2 sfp port for uplink and downlink , itc of 8 port smart managed poe data switch with 2 sfp port for uplink and downlink , supply of 6 port fully loaded io jack panel , itc of 6 port fully loaded io jack panel , supply of 4u size network rack with mounting accessories , itc of 4u size network rack with mounting accessories , supply of 1 or 2 meter cat6a patch cable , itc of 1 or 2 meter cat6a patch cable , supply of 5 meter cat6 patch cable , itc of 5 meter cat6 patch cable , supply of cat 6 a cable for access control ip point and cctv point , itc of cat 6 a cable for access control ip point and cctv point , supply of 9 module box with 3 socket and 3 switch , itc of 9 module box with 3 socket and 3 switch , supply of 3c x 1.5 sq mm frls unarmored shielded cable , itc of 3c x 1.5 sqmm frls unarmoured shielded cable , sitc of wall cutting closing with cement and finishing with putty and paint , sitc of back entry holes 25mm cutting closing with cement and finishing with putty and paint bid details/ 2 / 46

Central Government / Public Sector

CTN :39903213

24 Apr, 2025 NA

Tirupati - Andhra Pradesh

Tender For secondary spring outer for generator car side-2 for lhb coaches as per fiat drg no : 126 8836, ver.01. conforming to rdso specification no. rdso/2017/cg-01, rev-02 (code-f16) ( rcf pl no. 3350040 0) (warranty period : upto 72 months from the date of supply) [ warranty period: 72 months after the date of delivery ]

Central Government/Public Sector

CTN :39888781

30 Apr, 2025 3.22 Crore

Prayagraj - Uttar Pradesh

Tender For interlocking tile work on both sides of carriageway for road safety (black spot id no. up-(04)-49) from ch. 66.000 to ch. 69.000 (urban stretch of attara) of nh-35 (old nh-76) in the state of uttar pradesh.

State Government

CTN :39905664

19 Apr, 2025 97.08 Lacs

Nadia - West Bengal

Tender For construction of car shed for swm vehicles at east side of nabadwip vivekananda stadium within nabadwip municipality (block - c) under nabadwip municipality, ward no.-18, nabadwip nadia.

CTN :39897055

23 Apr, 2025 NA

Delhi - Delhi

Tender For supply of oil filter , air cleaner filter , tail light assy , sport light , relay , master cyl kit , side mirror up to 5 ton , tail light assy , transmisson filter , wiper blade , front windo lower glass l s new model , front windo lower glass r s new model , front window bedding l s new model , front window bedding r s new model , fan belt new model , fwd indicator , reflector , side indicator , over flow pipe , hand brake pad , carbon brush , hyd pipe , wind screen glass , steering cyl seal kit , fan belt , filter kit , head light , steering cyl seal size 22x32x8 , steering hyd pipe , hyd filter , parking brake pad , bulb 24 v 21 w double filament , indicator bulb 24 v 5 w , indicator bulb 12 v21 w , indicator bulb 24 v 21w , wiper srinkar motor 24v , washer spring all type , horn 12v , wiper sprinkle nozle xenon , wiper sprinkle nozle scorpio , wiper sprinkle nozle 2 5 ton , wiper sprinkle nozle tipper and dumper , glass filling paste silicon passe , washer banjo all size copper and alluminium , thread sealant , areldite , thread tape , hose clamp all type , flex quik 15 gm , micro fuse scorpio , anabond , sholding shaft 100 grm , soildreing wire 200gm , insulation tape , bush set all type

CTN :39573832

09 Apr, 2025 NA

Dehradune - Uttarakhand

Tender For corrigendum : supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , gum spirit of turpentine oil as per is 533 (q3) , tyre nylon grip 28 x 1 and half inch , tube 28 x 1 and half inch , tyre nylon grip 26 x 1 and half inch , tube 26 x 1 and half inch , chain cover , screw mud guard long 1 inch , carrier clamp , chain bicycle , brake shoe complete , m g stay clip , chain wheel , seat clip , break u bolt , seat nut with bolt , stand spring , cotter pin , valve tube , ball 5 by 32 , ball 1 by 4 , pedal lh , pedal rh , spokes with nipple , crank plain , ball head race set of three , free wheel , reflector , cover saddle pvc , bb spindle with cup , chain adjuster , chain stay bolt , spindle hub rear , spindle hub front , hub cone , brake clip l and r , hub cup , handle grip , brake u rear , brake u front , solution tube , cutting plier , screw driver long 300 mm double side , open spanner 8x9 inch , open spanner 10x11 inch , ring spanner 12x13 inch , ring spanner 14x15 inch , pipe wrench 450mm , pedal spanner , parrot plier , free wheel die , hammer 300 gm , nipple key , scissor brass handle 300mm , rime bend wrench , tasla steel , compressor nozel , compressor pipe , paint brush 2 inch bid number/ & ( * ) : gem/2025/b/5964713 dated/ + : 05-03-2025 bid document/ 2 2 1 / 48

By Cities

By States

By Agencies

By Ownerships

By Sectors