Latest Department Of Cooperation Tenders | Department Of Cooperation e-procurement Tender

Corporations And Associations And Others

CTN :45526425

22 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of pump and pump spares - supply of pump and pump spares - pump & pump spares make-kirlosker/sintech/gitahigh flow pump& its spares make- risansi/ ropeman, csm bhogpur, pump type-kpd 125x45q-160 cum /hr.,h-60mtr, size 125x150mm,rpm 1440, moc pump casing-ss-304,casing cover ss-304 ,impeller ss-304, sleeve ss-304, shaft ss-304 , ci casing cover gland side for pump type-kpd 125x45 make gita q-160 cum /hr.,h-60mtr, size 125x150mm, rpm 1440, raw juice pumpq-200 cum /hr.,h-60mtr, size 100x450mm,rpm- 1440, moc ci body & sleeve ss-304, shaft ss-304 &impeller ss-304, raw juice pumpq-200 cum /hr. , h-60mtr, size 100x450mm, rpm- 1440, moc pump casing-ss-304,casing cover ss-304 ,impeller ss-304, sleeve ss-304, shaft ss-304 , clear juice pumptype - kpd 125/45, capacity : 180 m3/hr head : 70 meter, rpm 1440 moc pump casing-ss-304,casing cover ss-304 ,impeller ss-304, sleeve ss-304, shaft ss-304, mud / filtrate pumptype bc-65-320, cap. - 40 m3/hrsize - 80x65, head - 25 meter, rpm -1440moc pump casing-ss-304,casing cover ss-304 ,impeller ss-304, sleeve ss-304, shaft ss-304 , sulphited/unsulphited syruppumpsize bc 65-320, capacity 60 m3/hrhead - 30 meter, rpm -1500moc pump casing-ss-304,casing cover ss-304 impeller ss-304, sleeve ss-304, shaft ss-304 , vacuum priming pumptype dv-50, size-50x50mm, rpm-1450, max. vaccum developed 630mm of hgmotor power- 7.5 kw, c.i pump body for injection pumptype db-250 33a,cap. 208.33 lps/750m3/hr.size 250x250, head 20 mtr. rpm 1440, suction bell for vertical injection pump, type - vmf- 500-1616gm-105/7-540/4, capacity- 1800m3/hr. , as per drg. bcsm/bh/012, rubber bush (cutlet bearing) for vertical injection pump, vmf- 500-1616gm-105/7-540/4, capacity- 1800m3/hr., high flow pump& its spares, high flow pumps cap. -30m3/hr, rpm -480, size: 6.0 inch x 6.0 inchhead :-70mtr., with steel claded rubber stator without v belt pulley & bed frame, spares of high flow pumps,cap. -30m3/hr, head :-70mtr.,rpm -480size: 6.0 inch x 6.0 inchsteel claded rubber stator length :375mm od-165 mm, ss bush, rubber stator steel claded, ss bush pin, head pin, rotor, rubber boot, circlip big, circlip small, spares of high flow pump,cap. -30m3/hr, head :-70mtr.,rpm -480size: 4.0 inch x 4.0 inch, rubber stator, ss bush, ss bush pin, head pin, rotor, rubber boot, circlip big, circlip small, csm nawanshahr, split body pump for raw juice, with s.s bodyall working parts of s.s type- sdc 125/150capacity- 180m /hr head-70 mtr, split body pump for clear juice, with ss body all working parts of s.ssize-12 x 14 capacity- 180m3/hr head-70 mtr, massecuite pump suitable for a massecuite capacity 30 t/hr. rotor- ss. en-8 shaft. body and cover c.i. with gun metal bush size 12 x12 , massecuite pump suitable for a massecuite capacity 30 t/hr. rotor- ss. en-8 shaft. body and cover c.i. with gun metal bush size 10 x10 , massecuite pump suitable for a massecuite capacity 30 t/hr. rotor- c.i. en-8 shaft. body and cover c.i. with gun metal bush size 12 x12 , massecuite pump suitable for a massecuite capacity 30 t/hr. rotor- c.i. en-8 shaft. body and cover c.i. with gun metal bush size 10 x10 , condensate pump,size: 125 x 100mmhead: 15 mtr., flow 95.4 m3/hrmaterial of working parts: impeller/shaft/sleeve-s.s.body and gland side casing- c.i., condensate pump, size: 80 x 50 mm.capacity: 110 gpmhead: 20 mtr. rpm: 1450material of working parts: impeller/shaft/sleeve-s.s.body and gland side casing- c.i., condensate pump, size: 50 x 32 mm , capacity: 110 gpmhead: 20 mtr. rpm: 1450 material of working parts: impeller/shaft/sleeve-s.s. body and gland side casing- c.i., mud pump,size: 100 x 80 mm head: 18 mts. capacity: 21 lps hp: 10 rpm: 1440material of working parts: impeller/shaft/sleeve-s.s.body and gland side casing- s.s. & bearing housing c.i., mono block pump type kds-822++ size -100 x 100 mm head range 14.0-22 mtr.capacity range 25.0-16 lps material of working parts: impeller/shaft/sleeve-s.s. body and gland side casing- c.i.,

Corporations And Associations And Others

CTN :45234483

23 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of vitamin-e at kapurthala plant.

Corporations And Associations And Others

CTN :45502609

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for servicing overhauling recommissioning of mill turbine and power turbine make bellis

Corporations And Associations And Others

CTN :45466299

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for supply of fibrizer hammer - csm ajnala, make:- imco/zuper fibrizer hammer as per drawing no. acsm 60 size:- 480 mm lenght, csm bhogpur, make:- zuper/polysield/hyster/uel fibrizer hammer as per drawing no. 1020-310-1700-112, csm gurdaspur, fibrizer hammer material: is: 2062 e250 br as per drawing no. - m125-m0257, csm morinda, make:- imco fribrizer hammer body in single piece construction (fixed type) fabricarted from 25 mm thick m.s plate, base material shall be of ms is: 2068 having tensile strenght 52-62 kg per cm sq and elongation 20 % as per our drawing no. ce/10-06/02. the necessary portion shall be hard faced.

Corporations And Associations And Others

CTN :45502611

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for servicing overhauling and recommissioning of mill turbine and power turbine make triveni

Corporations And Associations And Others

CTN :45466288

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for supply of shaft for swing type hammer

Corporations And Associations And Others

CTN :45365538

22 Jun, 2026 NA

Ludhiana - Punjab

Tender For corrigendum : hiring of jeep camper type (as per transport policy)

Corporations And Associations And Others

CTN :45466310

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for supply of fibrizer hammer domite tips

Corporations And Associations And Others

CTN :45475995

19 Jun, 2026 NA

Batala - Punjab

Tender For corrigendum : contract for supply of cane cutting knives - csm ajnala, make: zuper/imco/tfipl cane cutter knives as per drawing no. acsm 61 for cutter length 465 mm, make: zuper/imco/tfipl tips for cane cutter/cane chopper knives. size 8" x 25 mm approximate weight 1.52 kg, csm batala, make: zuper/imco/tfipl hardened up to 45-48 hrc double edge cane cutting knives duly hard faced to be done by n6006 moc: is-2062e 250 br size:- 25x525x160 mm as per drawing no. m126_0266e, csm bhogpur, make:- imco/tfipl cane cutting knives duly forged & tempered made from shock resistance ms plate 25mm thick confirming to is - 2062. hardness 56-58 hrc/550 bhn, tensile strength - 65kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r2 with hard facing., make:- imco/tfipl cane cutting knives dully forged & tempered made from shock resistance ms plate 25mm thick confirming to is-2062. hardness-56-58 hrc/550 bhn, tensile strenght-65 kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r3 with hard facing., csm budhewal, make:- zuper/imco/tfipl cane cutting knives for cane cutter as per drawing no. ce/87-12 (duly hard faced) made from 25 mm thick ms plate grade is-2062 make sail, csm fazilka, make:- zuper/imco/tfipl cane cutting knives without hard facing as per drawing no. 310r, csm gurdaspur, make:- zuper/imco/tfipl chopper knives material - is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0255a both side hard facing to be done by n6006 electrode, make:- zuper/imco/tfipl cane leveller knives material- is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0256a both side hard facing to be done by n6006 electrode, csm morinda, make zuper/imco swing knife type cane cutter knives with domite tips as per our existing size and design, csm nawanshahr, make:- zuper/imco/tfipl cane cutting knives as per drawing no. m-350 with hard facing, csm nakodar, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-336-3m, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-337-3m

Corporations And Associations And Others

CTN :45363920

22 Jun, 2026 NA

Ludhiana - Punjab

Tender For corrigendum : hiring of vehicles (tempo) for cattle feed/ milk products/technical services (as per transportation policy)

Department Of Cooperation Tenders - DC Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors