Latest Kichha Sugar Company Limited Tenders | Kichha Sugar Company Limited e-procurement Tender

State Government

CTN :45228139

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of coal and coke

State Government

CTN :45228135

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of wire and cables

State Government

CTN :45228143

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of v belt

State Government

CTN :45228137

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of centrifugal machine spares - spares for b&w make kt 1350 /34 centrifugal machine, oil seal 105 x 130x 15 matlic, oil seal 105 x 130 x 13 matlic, double rubber buffer for tilting chute, rubber o ring 160 x 3mm, h.t. bolt half thread unbrako 16mm x 120mm nut 16mm, nut 8 mm 8 mm, hexagonal s. s. bolt 10mm x 35 mm, hexagonal s. s. bolt 1" x 1", s. s. nut 10 mm x 10mm long, s.s. bolt half thread 16mm x 100mm, s.s.nut 16mm, s.s.allen key bolt 3/4" x 2", h.t. hex head bolt half thread with nut 20mmx90mm, h.t. hex head bolt full thread with nut 20mm x 100mm, s.s. bolt & nut 12 mm x 50 mm, s.s. clamp 2 mm thick 10mm hole, spares for nhec make nk/1100/30 centrifugal machine, s.s. needle valve 3/4" (ss-304), s.s. needle valve 1/2" (ss-304), brass spray nozzle, m.s. socket heavy duty 1/4", other spares, s.s. bolt 8mm x 25mm, s.s. bolt 10mm x 35mm, s.s. bolt 10mm x 40mm, s.s. bolt 12mm x 50mm, s.s. bolt 10mm x 60mm, s.s. nut 6 mm, s.s. nut 8 mm, s.s. nut 10mm, s.s. nut 12mm, dumping pad 75 x 150mm, dumping pad 75 x 60mm, stainless steel allen key bolt 12mm x 35mm, stainless steel allen key bolt 12mm x 30mm, stainless steel clit, rubber seal 87x103x10, rubber seal 31x40x3.5, oil seal for nk machine as per sample 75x85x10, 90x100x10, indicator elbow o ring x 3mm, indicator elbow o ring 3/4 x 3mm, clamp for rubber hose pipe size 2 x 24, rubber hose pipe with both side nut 1/2"x1000 mm 2100psi, rubber hose pipe with both side nut 1/2:x750 mm 2100psi, rubber hose pipe with both side nut 3/4":x1000 mm 2100psi, s.s. needle valve 3/4" (ss-304), rubber hose pipe x2 size with both side nut 2100psi, m.s. socket monarch nozzle, copper tube , brass connector with ferrule and nut , brass elbow with nut & ferrule , bearing housing with forged steel en-9 shaft and bearing (skf make nu-2215-2 nos., qj-215 01 no.) of nhec make nk-1100 centrifugal machine dynamically blanced, pulley od 235 mm no of grove 8 belt type c-148, moter pulley of nk-1100 centrifugal machine dynamically blanced od 326 mm no of grove 8 belt type c-148, spare pulley of bearing housing of nk-1100 centrifugal machine dynamically blanced od 235 mm no of grove 8 belt type c-148, pulley of bearing housing of kt-1350 centrifugal machine dynamically blanced od 240 mm no of grove 6 belt type spc-3550, motor pulley of kt-1350 centrifugal machine dynamically blanced od 290 mm no of grove 6 belt type spc-3550, spare shaft of nk-1100 centrifugal machine bearing housing, side cover of bearing housing of nk-1100 centrifugal machine, top cover, botttom cover, distance piece of nk-1100 centrifugal machine bearing housing, spare for 1750 kg charge centrifugal machine, oil seal 110x140x15, oil seal 170x200x15, o ring 110x3, o ring 140x4, o ring 240x5, circlip dia 140x4mm, spray nozzle flat jet 90 deg, set of tension ring for plough 60x68x12 (i set=3 ring pairs) with pressure ring, seal kit for 5" dia cylinder (02 nos.=1 set), rubber seal kit for pneumatic cylinder 6 x5 ", rubber seal kit for rotary distributor, rubber seal kit for 2" dia cylinder, rubber seal kit for 3" pneumatic cylinder, teflon seal for spindle locating arrangement, repair kit for butterfly valve 300 nb (2=1 set), repair kit for butterfly valve 200 nb (2=1 set), seal kit for pneumatic ball valve, solenoid valve 3013, solenoid valve 3012, coil for solenoid valve 3012/3013, proximity switch m 30x65, proximity switch m 50x65 for wobbling sensor, pilot operated non return valve with adapter 3/8", air filter ", flexible hose pipe 1"x1100 mm 2100psi, flexible hose pipe 1/2"x1200 mm 2100psi, flexible hose pipe 1/2"x800 mm 2100psi, flexible hose pipe 1/2"x900 mm with benjo connection 2100psi, flexible hose pipe 3/8"x1000 mm with benjo connection 2100psi, flexible hose pipe 3/8"x800 mm 2100psi, seal kit for bottom valve cylinder make heramb udyog model-hu-bdvcrd68, seal kit for main plough cylinder up/down make energy tech engineers sr. no-023110/1750, seal kit for in/out cylinder of plough discharge make-energy tech engi

State Government

CTN :45228140

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For general electrical goods - heavy duty battery make eveready 9 volt , eveready pencil cell 1.5 voltsize aa , led rechargable tourch light eveready make , foot switch element make bch , puch button & element make teknic red , puch button & element make teknic green , push button element -e1 cat no se-06 teknic make , led tube light 12 watt length 2 feet make bajaj , led tube light 12 watt length 2 feet make orient , led tube light 12 watt length 2 feet make surya , finned type air heater 1000 watt 220 volt , finned type air heater 2000 watt 220 volt , complete electric coil heater 1500 watt , heater element 1500 watt , slipring holder mounting for 7.5 hp motor , slipring carbum holder for 7.5 hp motor , slipring for 7.5 hp motor id 65 mm od 118 mm l 84 mm , pt bult 100 watt 240 volt make bajaj , pt holder bakelite make anchor make , pt button holder anchor make , pt bulb 100 watt 24 volt anchor make , electronic fan regulator anchor make , metal exhaust fan blade 18" with hub , metal exhaust fan blade 12" with hub , double tail carbon brush size 22x32x40 mm , double tail carbon brush size 16x32x38 mm , double tail carbon brush size 50x25x50 mm , double tail carbon brush size 50x25x65 mm , double tail carbon brush size 16x18x38 mm , soldring iron 25 watt make tony , soldring iron 35 watt make tony , soldering wire 1 mm 250 gram roll , angle grinder 5" make bosch , metal drill bit set size 10 mm make bosch , wall drill bit size 6.5 mm , had driver megger 500v make waco , long tester clamp meter make meco , continuity tester make taparia , screw driver 482 way 12" make taparia , line tester make taparia , insulated pliers make taparia , d spaner set 6x7 to 30x32mm , ring spaner set 6x7 to 30x32mm , allen key 1.5 mm to 10 mm , led flood light 50 watt make bajaj , led flood light 50 watt make orient , led flood light 50 watt make surya , led flood light 100 watt make bajaj , led flood light 100 watt make orient , led flood light 100 watt make surya , led flood light 200 watt make bajaj , led flood light 200 watt make orient , led flood light 200 watt make surya , led bulb 9 watt make bajaj , led bulb 12 watt make bajaj , led tube light 20 watt make bajaj , led tube light 20 watt make surya , led tube light 20 watt make orient , piano type switch 6 amp make anchor , 13 pin socket 6 amp make anchor , combined switch with box anchor 16 amp , 13 pin top make anchor 6 amp , steel grip pvc tape , empire tape 1" , crc 2-26 , loc tite 641 50 ml , plycab make ceiling fan 1200 mm white , crompton ceiling fan 1200 mm white , bajaj make ciling fan 1200 mm white , pvc gili 2" , backtol gray varnish 1 kg tin , thinner t-205 , copper cable

State Government

CTN :45228136

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For service of vacuum filter and supply of its spares and cluster nozzle - vacuum filter spares & service, s.s. screen having 625 holes/sq. inches. (salem make) (minimum weight 1.2 kg. each screen), brass zigzag strips (2 long), rubber hose pipe (2 " x 24"), mud scrapper 5"x10 mm x 6 ply (dunlop make) for 8 x 16 vaccum filter, araldite 1.8 kg. pack, m-seal 1 kg. packing (pidilite make), a) brass end strip, b) s.s. end strip, copper revit round head 5mm x 12mm, copper revit rounf head 5mm x 15mm, copper revit rounf head 5mm x 18mm, soft lead 8 mm wire, brass tube plate for 8x16 vaccum filter, ss electrode (no 12) 2.5 mm thick, roller for mud conveyor belt, ss clamp for binding rubber hose pipe 2 1/4"x24", s s bolt 1/4"x3/4", s.s. channel 16 long, monarch brass nozzles, m s shocket for monarch brass nozzles, junction box (s.s. sheet) from 3mm thick plate heavy duty, s.s. nipple for decking plate (as per sample), s.s. decking plate for 8x16 (as per our site vacuum filter), s. s. binding strip 3/4" x 2-1/4, s. s. pipe 1.5mm thick, size= 1/2 x 46 , s. s. pipe 1.5mm thick, size= 1/2" x 65 , s. s. pipe 1.5mm thick, size= 1/2" x 16.5 , s. s. pipe 1.5mm thick, size= 1/2 x 28 , s. s. pipe 1.5mm thick, size= 3/4 x 7, s. s. pipe 1.5mm thick, size= 3/4 x 6.5, s. s. pipe 1.5mm thick, size= 3/4 x 10, round head s.s. screw " x 3/4", s.s. electrodes (no. 10) thikness 3.15 mm, vacuum filter vacuum disc plate (brass/gun matel) complete set (left & right), s.s. gate valve (screw type) 2 size, s.s. electrodes (no. 8) 4mm size, servicing of vacuum filter, after dismantling of s.s. screens of vacuum filter no. 1, 2 & 3, cleaning of decking plates, conducting hydraulic testing of five way fitting connections and giving satisfactory leak proof trials of same and thereafter refitting of all the dismantled s.s. screens complete in all respect, fitting of new damaged five way fittings (complete with welding etc.) of vacuum filter no. 1, 2 & 3 and thereafter conducting satisfactory leak proof trials. (5 way fitting), replacement of damaged decking plate nipples of vacuum filter no. 1, 2 & 3 and welding with five ways fitting, thereafter conducting satisfactory leak proof trials., replacement of damaged end strips of vacuum filter with new strips complete in all respect and thereafter conducting satisfactory leak proof trials. half filter, replacement of damaged end strips of vacuum filter no. 3 with new strips complete in all respect and thereafter conducting satisfactory leak proof trials. full filter, replacement of damaged brass/s.s. channels (16 ft. lengthl) of vacuum filter with new s.s/ brass channels complete in all respect, replacement of damaged decking plate of vacuum filter with new decking plate complete in all respect., dismantling & fitting both end s.s. tube of filter with vacuum distribution plate in filter and satisfactory trial., grinding of tunion valve plate with bear plate of vacuum filter and sucessful trial at minimum of 450mm of vacuum at junction with rotation of drum., vacuum genration up to 400mm at vacuum disc (including testing of pipe line to be made), keeping in the condition of genration of vacuum at vacuum pump was more then 625mm., repair of 8 point lubricator of vacuum filters (including cost of all un-serviceable parts), 3/8" bsp, non return valve, angle type, working pressure 21 kg./sq.cm. (as per sample), m.s. plug 3/8", m.s. plug 1/2", m.s. tee 3/8", m.s. elbow 3/8", supply of five way clusterwith nozzlefor mill mist colling system (complete in all respect) as per existingscope of workits including five way fitting branch line and nozzle.1- material- thermoplastic equivalent2- guarantee- one full crushing season, spray nozzle for mist cooling system

State Government

CTN :45228134

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of industrial paint

State Government

CTN :45228138

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of gun metal bearing

State Government

CTN :45228153

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber molded goods - moulded rubber goods, neoprene rubber square suitable to stand temp.200 c for juice heater size 5/8 x 5/8 , rubber square suitable to stand temp.200 c for v. line juice heater size 1/2" x 1/2", nitrile rubber seat for angle valve of juice heater suitable to stand temp.200 c, as per drg no. ksc/bh/296/02, nitrile rubber seat for double beat valve of juice heater size 240mm od x 94mm bore x 18 mm thick, neoprene rubber taper plug for evaporator tubesize: 37mm x 40mm as per drg.no. ksc/286/02, nitrile rubber seat for vapour angle valve (inlet of 4th evaporator body) suitable to stand at 200 c temp. as per drg.no.ksc/evp/97/2001 fig no.1, nitrile rubber seat for main exhaust valve of semi kestner as per our drawing no. ksc/bh/7898 fig. no. 1, nitrile rubber seat for surplus exhaust angle valve of semi kestner suitable to stand at 280 c as per drg. no.ksc/bh/7899 fig no. 3, nitrile rubber seat for outlet vapur valve of s.k. suitable to stand at 280 c as per drg. no. ksc/bh/7899 fig.-1, nitrile rubber seat for angle valve (inlet exhaust valve of v.cell) suitable to stand at 280 c as per drg. no. ksc/bh/8607 fig.-1, nitrile rubber seat for pan exhaust valve to stand at 260 c as per drg.no.ksc/bh/7899 fig no. 2, nitrile rubber seat for exhaust/vapour angle valve for pan no. 1, 3, 8 & 10 as per dr g. no. ksc/boil/221, fig. no. 1, fig. no. 2, fig. no. 3, fig. no. 4, nitrile rubber seat for discharge valve of pan no. 6 & 7 as per drg. no.ksc/8608, nitrile rubber seat for discharge valve of pan no. 9 & 10 as per drg. no.ksc/8609, nitrile rubber seat for discharge valve of pan no. 8 as per drg. no.ksc/1022, synthetic rubber joint for main hole of pan 3, 4 & 5 size 517 od x 443 bore x 13 thick., synthetic rubber joint for main hole of pan 1, 2, 3,6, 7, 8, 9 & 10 size 26" od 12" bore 6 mm thick, synthetic rubber joint for pan condenser main hole (a) size 22"od, 12"bore, 6mm thick,, (b) 28"od,12"bore, 6mm thick, synthetic rubber joint for evaporator man hole od 19.11/16 bore 18. 7/16 & 5/8" thick, nitrile rubber seat for double beat valve of juice heatersize 240 mm od x 94 mm bore x 21 mm thick, nitrile rubber seat for double beat valve of juice heatersize 230 mm od x 94 mm bore x 21 mm thick, synthetic rubber ring suitable to stand at 150 ctemp. & 200 psi dia(inch.) bore(inch) thickness(mm), 22 12 6, 24 12 6, 26 12 6, 28 12 6, 30 12 6, 36 18 6, 48 40 6, 54 46 6, synthetic rubber ring joint suitable to stand at 150 c temp. and 200 psi for sight glasses of pan & evaporator dia(mm.) bore(mm) thickness(mm), 230 180 6, 220 180 6, 210 165 2, 222 195 2, 218 190 2, 170 130 6, 150 110 6, neoprene rubber star for cane un-loader as per drg.no.ksc/cr/311286 size : 6", neoprene rubber star for cane un-loader as per drg.no.ksc/cr/17982 size : 9", rubber bushes, o.d.(inch) bore(inch) length(inch), 5/8 1, 7/8 1, 1 1, 1.1/4 1/2 1.1/2, 1.1/4 5/8 1, 1.1/4 1.1/4, 1.1/4 7/8 2, 1.1/2 1.1/4, 1.1/2 1.1/2, 1.1/2 7/8 1.3/4, 2 2, 2 7/8 2, 2 1 2, 2 1.1/2 7/8, 1 1/2" 3/4" 2", 2.1/2 1.1/4 2.1/2, 1 1/2 1, 1 1/2 1 1/4, 1 1/4 5/8 1 1/2, 1 1/4 3/4 1 1/2, 1 1/4 1/2 1 1/4, 1 1/2 3/4 2, 1/2 3/4 2, 1/2 5/8 1 1/2, spares for t.e.w. make type 36 dia juice clarifier, mud sealing ring as per sample/ drg., telescopic valve rubber ring as per sample/ drg., mud scraping rubber strip with wire netting size 32" x 5" x ", rubber seat for molasses weighing scale size- 14 dia, thickness- 16mm type ( silicon bitile rock hard rubber ), (a) rubber seat for water weighing scale (as per drawing ), (b) rubber seat for juice weighing scale (as per drawing ), neoprene rubber stoper(hard quality) for juice weighing scale 70/62 dia, 55 mm lenth as per drawing no-ksc/jk1/144, neopreme rubber seat for exhaust valve suitable for 200 0 c temerature as per drawing no : ksc/bh/1021, serial no 1 , od 510, id 365 mmthickness 40/15 mm, serial no 2 , od 555, id 380 mmthickness 40/15 mm, serial no 3 , od 655, id 480 mmthickness 40/15 mm, serial no

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Kichha Sugar Company Limited Tenders - KSCL Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors