Latest Uranium Corporation Of India Limited Tenders | Uranium Corporation Of India Limited e-procurement Tender

Central Government/Public Sector

CTN :44687406

27 Apr, 2026 NA

Cuddapah - Andhra Pradesh

Tender For supply of 222 kw drying chamber heater unit coils and accessories : : m -item1 element holding mullite tube -ceramic refractory pipe- 50mm dia-od-, 41mm-id- x 450mm length as per drawing- ucil-tmpl-elect-01 -type-a , item2 terminal holding mullite tube -ceramic refractory pipe- 25mm dia- od-, 19mm dia-id- x 350mm length as per drawing - ucil- tmpl-elect-01 -type-b- , item3 element end stopper refractory washers as per drawing - ucil-tmpl-elect-01 - type-c- , item4 mullite caps for the ss310-rod- terminal for half inch size. -type-f- , item5 sindonium sheet as per dimensions 410mm x 80mm x 13mm , item6 38.3mm dia x 1.6mm thick of 500mm length ss310 pipes complete with end hole and stopper pins as per drawing - ucil-tmpl- elect-01 -type-d and type-e- , item7 heating element provided with m12 threading ss310 terminal half inch rod with ss310 nut and washer -detailed specification as per given in annexure-1

Central Government/Public Sector

CTN :44305441

10 Apr, 2026 NA

East Singhbhum - Jharkhand

Tender For corrigendum : supply of xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1)

Central Government/Public Sector

CTN :44688069

21 Apr, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of input assembly with bearing and seal, part no: 53-95-103p , intermediate assembly with bearing and seal, part no: 41- 50-103p

Central Government/Public Sector

CTN :44676371

17 Apr, 2026 NA

Jaduguda - Jharkhand

Tender For supply of ss-316 hex head bolt with nut ht size-1 by 2 inch x 1.1 by 2 inch , ss-316 hex head bolt with nut size-1 by 2 inch x 2 inch ft , ss-316 hex head bolt with nut bsw ht size-5 by 8 inch x 2 inch ft , hex head ss-316 bolt and nut ft 5 by 8 inch x 2.1 by 2 inch , ss-316 hex head bolt with nut bsw ht size-5 by 8 inch x 3 inch , ss-316 hex head bolt with nut bsw ht size-3 by 4 inch x 2 inch , ss-316 hex head bolt with nut bsw ht size-7 by 8 inch x 2 inch , hex head ss-316 bolt ft- m12 x 80 , hex head ss-316 bolt ft- m20 x 80 , hex head ss-316 bolt ft- m24 x 120 , hex head ss-316 bolt ft- m8 x 40 , hex head ss-316 bolt ft- m10 x 50 , hex head ss-316 bolt ft- m12 x 50 , washer plain ss316 1 by 2 inch x 2.5 mm thick od- 25mm , washer plain ss316 3 by 8 inch x 1.5 mm thick od- 25mm by 30mm , washer plain ss316 5 by 8 inch x 3 mm thick od- 30mm , washer plain ss316 3 by 4 inch x 3.0 mm thick od- 45mm , washer plain ss316 3 by 4 inch x 1.5 mm thick , plain washer ss316 size-7 by 8 inch x 2 mm thick , plain washer ss316- m8 , plain washer ss316- m12 , nut ss-316 1 by 2 inch , nut ss-316 5 by 8 inch , nut ss- 316 3 by 4 inch

Central Government/Public Sector

CTN :44194513

03 Apr, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of butterfly valves

Central Government/Public Sector

CTN :44687368

13 Apr, 2026 2.75 Crore

Cuddapah - Andhra Pradesh

Tender For tender for supply of earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m , as directed by engineer-in-charge. all kinds of soil , filling available excavated earth (excluding rock) in trenches , plinth , sides of foundations etc. in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m , complete as per directions of engineer-in-charge. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1-3-6 (1 cement - 3 coarse sand (zone-iii) -6 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement - all work up to plinth level 1-1.5-3 (1 cement - 1.5 coarse sand (zone-iii)- 3 graded stone aggregate 20 mm nominal size) , complete as per directions of engineer-in-charge. , steel reinforcement for r.c.c. work including straightening , cutting , bending , placing in position and binding all complete above plinth level and below plinth level.thermo-mechanically treated bars of grade fe-500d or 550d , complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and lifta) in foundations , footings , bases of columns , etc.complete as per directions of engineer-in-charge. , centering and shuttering including strutting , propping etc. and removal of form as per directions of engineer-in-charge at all leads and liftb) in superstructure columns , lintels , beams , plinth beams , roofs etc. , complete as per directions of engineer-in-charge. , dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete , complete as per directions of engineer-in-charge. , supplying and filling in plinth with sand under floors , including watering , ramming , consolidating and dressing complete , complete as per directions of engineer-in-charge. , demolishing r.c.c. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. , neat cement punning , providing and grouting of pockets with cementitious grout non shrink of approved make by suitable means free flowing pump curing etc complete as per directions of engineer in charge the payment shall be made on the basis of actual weight of approved grout used as per directions of engineer in charge , structural steel work riveted , bolted or welded in built up sections , and framed work like purlins , frames , trusses etc. including cutting , hoisting , fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer , complete as per directions of engineer-in-charge.. , providing , laying and jointing glazed stoneware pipes of 150mm dia pipe of class sp1with stiff mixture of cement mortar in the proportion of 1ratio1 1 cement 1 fine sand including testing of joints etc complete as per directions of engineer in charge , constructing masonry chamber 120x120x100 cm inside , in brick work in cement mortar 1-4 (1 cement - 4 coarse sand) for sluice valve , with c.i. surface box 100 mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and rcc top slab 1-2-4 mix (1 cement - 2 coarse sand - 4 graded stone aggregate 20 mm nominal size) , ic necessary excavation , foundation concrete 1-5-10 (1 cement -5 fine sand - 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1-3 (1 cement - 3 coarse sand) 12 mm

Central Government/Public Sector

CTN :44688087

21 Apr, 2026 NA

Jaduguda - Jharkhand

Tender For supply of perlite base filter aid (precoat material) as per technical specification attached.

Central Government/Public Sector

CTN :44688133

07 Apr, 2026 39.95 Lacs

East Singhbhum - Jharkhand

Tender For providing of manpower outsourcing services - minimum wage - skilled; not required; others,manpower outsourcing services - minimum wage - unskilled; not required; others

Central Government/Public Sector

CTN :44699142

20 Apr, 2026 38.82 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56 , title57 , title58 , title59 , title60 , title61 , title62

Central Government/Public Sector

CTN :44346233

04 Apr, 2026 4.14 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : providing of custom bid for services - fire and burglary insurance

Uranium Corporation Of India Limited Tenders - UCIL Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors