Latest Kisan Sahkari Chini Mills Limited Tenders | Kisan Sahkari Chini Mills Limited e-procurement Tender

Co-operative

CTN :45096131

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of instrument spare and annual maintenance contract - circular charts:- i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :- i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :- i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:- i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:- i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:- i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:- a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :- (i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :- i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :- (i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amc super-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit

Co-operative

CTN :45173175

27 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For sugar bags stitching thread tirpal polythine sheet tag

Co-operative

CTN :45173191

27 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For etp and etp lab operation

Co-operative

CTN :45173188

27 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For wet scrubber fly ash cleaning

Co-operative

CTN :45173187

27 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For annual maintenance contract and operational of industrial heavy duty dm plant to produce high purity dm water for high pressure boiler feed capacity- 15 m3/hr

Co-operative

CTN :45173189

27 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For insulation lagging aluminium clading with material

Co-operative

CTN :45096132

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For vacuum filter spares and repairs

Co-operative

CTN :45073102

18 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For electric cable, wire etc

Co-operative

CTN :45126449

22 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For seed transportation

Co-operative

CTN :45073104

18 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of the electric miscellenious material - empire tape 1", p.v.c. tape " steel grip make, glass tape size 1", cotton tape 1", black insulation tape 1" johnson & johnson make, fiber glass sleeve 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 10 mm, 18 mm, film paper 7 mile/ 10 mile, nomax paper 7 mile/ 10 mile, plastic coated leatherized paper 7 mile/ 10 mile, fiber glass pipe " x 4 to 1" x 4, condensor 2.5 mfd, 3.15 mfd, 4.0 mfd, 6.0 mfd, 8.0 mfd, 10.0 mfd, 30.0 mfd, 36.0 mfd, 100.00 mfd, 120.00 mfd, exhaust fan three phase 415 volt, 50 hz isi mark, size-18", size-24", exhaust fan blade size-15", size-18", size-24", auxilary contact block 3ta61,220 volt, 4no+4nc, auxilary contact block 3ta24/28, heater rod 1000 watt 12" long, 1500 watt 12" long, petrolium jally 50gm pack, alluminium/copper crimpling lugs (dowells make/ svs make), lug punching machine upto 400 sqmm crimpling dia r4 to r14, crimpling die r-4 to r-14, phase tester taparia make, c.r.c 226, hot air blower, benzene, insulating plier 8" taparia make, thinner dr.beak l1 twenty litre pack, air dry varnish dr.beak make elmo luft 1a - 21 litre pack, becktol red/grey dr.beak - 4 kg tin, motor connection plate for bbl/ke/siemense/crompton make motor 7.5 hp, 10 hp, 15 hp, 25 hp, 40 hp, screw driver set taparia make, proximettry switch ps 18 dbpo 5-30 vdc, h.b.c./hrc fuse link 250amp. tkf 250, 660 vac, 80 kag g.e.power controls, isi mark, volt meter 144 x 144mm, 0-600v, ae make, square type volt meter, 96 x 96, 0-600v, pedistal type amp meter 0-200 ctr 200/5, 0-300 ctr 300/5, 0-400 ctr 400/5, 0-600 ctr 600/5, flash mounting digital frequency meter 94 x 94mm, 45-55hz, 144x144mm, 45-55hz, soldering rod, soldering iron, soldering flux eyre no.7, soldering wire 60% + 40%, megger upto 1000 volt (hand operated), megger upto 1000 volt (mechanical operated), bakelite sheet 1/16" x 2 x 4 to 3/8" x 2 x 4, bakelite rod 2", potentio-meter pankaj make 500 ohm 3 watt, 5k ohm 1 watt, 600 ohm 3 watt, 10k ohm 1 watt, diode 15k kitron forward, diode 15k kitron reverse, power diodes for t.g.set 321 umr 100 reverse, power diodes for t.g.set 321 umr 100 forward, diode 12 hr 40/u.s.r. 120-40 usha 40 amp. normal polarity, reverse polarity, brass holder for fibrizer 400 hp slipring motor, brass holder for cane unloader carbon brush size- 40 x 40 x 20, brass holder for cane unloader carbon brush size- 25 x 25 x 100, carbon holder spring for above holder size- 40 x 40 x 20, carbon holder spring for above holder size- 25 x 25 x 100, copper carbon brush m-15 e quality(a) with pig tail 8 x 18 x 30, 10 x 30 x 40, 16 x 32 x 42, fibrizer motor 22 x 32 x 45, cane cutter motor 20 x 40 x 50, 25 x 25 x 40, 25 x 25 x 50, 1500 kw alternator 25 x 40 x 55, (b) without pig tail (cane unloader) 25 x 40 x 40, 20 x 20 x 96/100, 25 x 25 x 100, ( c ) graphited carbon brush with double pig tail for centrifugal machine 12x32x45, 10x30x40, copper carbon brush m-15 e quality with double pig tail 25 x 32 x 50, 25 x 40 x 50, 32.5 x 32.5 x 12.5 (eg-224), copper carbon brush m-15 e quality for 1500 kw alternator rotor size 25 x 40 x 55, carbon holder for 15kw exciter jyoti make, tension spring for above, d.c.volt meter 65x65, 0-100 amp. panel mounting, push button element vaisno make 1no+1nc, rectifier 200amp + base (usha), semi conductor fuse gsg 1000/350, 600 volt ac, 350amp (bussmann make), fuse kit kat 20 amp. ee make, fuse kit kat 32 amp. sm-32 ee make, fuse kit kat 63 amp. sm-63 ee make, c.t.operated flash mounting amp meter 96x96mm 0-200amp ctr 200/5, 0-300amp ctr 300/5, 0-400amp ctr 400/5, 0-500amp ctr 500/5, 0-600amp ctr 600/5, 0-800amp ctr 800/5, 0-3000amp ctr 3000/5, but volt meter 0-600 v, current transformer ae 50/5,100/5,200/5,400/5,600/5, plastic cooling fan for ke/bbl/ngef make motor 3hp, 5hp, 7.5hp, 10hp, 15hp, 20hp, 25hp, 30 hp, 40hp, 50hp, flush type synchronius timer 2 delay 5-120sec. em 1000 gec, crane duty motor sq cage duty s-4 (crompton/gec/bbl/siemense make) all size/type, squarrel cage induction motor (c

Kisan Sahkari Chini Mills Limited Tenders - KSCML Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors