Aluminium Tenders

State Government

CTN :45721049

08 Jul, 2026 2.16 Lacs

Jaipur - Rajasthan

Tender For supply of modular kitchen accessories at raj bhawan campus, jaipur - providing & fixing telescopic channel of approved make for drawers with screws complete as per approved by engineer in charge. 500mm long, providing & fixing drawer handle of approved make for drawers with screws complete as per approved by engineer in charge. 150mm long, providing and fixing is : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete., providing and fixing s.s. rod 30mm dia (304 grade ,16swg) including brackets fixed with c.p. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings.

Central Government/Public Sector

CTN :45731116

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of 17 feet extension aluminium ladder, extendable upto 40 feet 'tiltable type' in ms trolley fixed with heavy solid rubber wheels with jack rods on 4 sides with handle supportand load capacity of 150 kgs. warranty upto 01years. as per specification enclosed. [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :44231929

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

Central Government/Public Sector

CTN :45738622

21 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of wireless athletic timing system pack with transponders, starter transmitter, versatile transmitters, clips, and carrying bag , olympic aluminium hurdle , safety hurdle , long jump take off board , horizontal distance indicator boards , competition take off board , high jump multi-bar rest attachment , elastic cross bar - high jump , blood flow restriction training device - bfr , pneumatic compression unit full kit , portable tens unit , athletic super cart - aluminum floor and frame , adjustable squat wedge , adjustable 5 to 90-pounds per dumbbell set

Central Government/Public Sector

CTN :45715777

20 Jul, 2026 NA

Thane - Maharashtra

Tender For supply of discrete components for assembly of 6 mv linac boards - isolated dc/dc converters - smd mini 1w iso un regulated dc-dc converter, aluminium electrolytic capacitors - radial leaded 1000uf 50v 16x25 high vibration, multilayer ceramic capacitors mlc, film capacitors 220pf 50vdc 2% pps film 0805, multilayer ceramic capacitors mlcc - leaded 50v 1uf x8r 10% rad ls:2.5mm aecq200, multilayer ceramic capacitors mlcc - smd/smt 50v 0.22uf u2j 1210 10%, headers & wire housings mega-fit vert hdr assy 2 ckt 15u" au, automotive connectors 1.5mm sfc, terminal loose piece, isolated dc/dc converters - through hole product type: dc/dc; package style: 2"x1"; output power (w): 30; input voltage: 9-36 vdc; output 1 (vdc): 15; output 2 (vdc): -15; output 3 (vdc): n/a, isolated dc/dc converters - through hole product type: dc/dc; package style: 2"x1"; output power (w): 30; input voltage: 9-36 vdc; output 1 (vdc): 5; output 2 (vdc): -5; output 3 (vdc): n/a, isolated dc/dc converters - smd mini 1w iso un regulated dc-dc converter, headers & wire housings mega-fit recept hsg 2 ckt v-0, headers & wire housings mega-fit crimp term tin 14-16awg, headers & wire housings 2.50 spox hsg 9p friction lock, headers & wire housings spox term 22-28g fem reel of 12000, multilayer ceramic capacitors mlcc - leaded 50v 1uf x8r 10% rad ls:2.5mm aecq200, multilayer ceramic capacitors mlcc - smd/smt 50v 0.1uf x7r 0805 5%, aluminium electrolytic capacitors - smd 50vdc 10uf 20% smd 4x5.8 aec-q200, multilayer ceramic capacitors mlcc - leaded rad 50v 10pf c0g 0.50pf ls:2.5mm, aluminium electrolytic capacitors - radial leaded 50v 33uf 35mohms smd 8x7mm, film capacitors 2200pf 50vdc 2% pps film 0805, film capacitors 22000pf 100v 1% orange drop, multilayer ceramic capacitors mlcc - leaded rad 100v 4.7uf x7s 10% ls:5mm, tantalum capacitors - solid leaded 50v 1.0uf 5%, multilayer ceramic capacitors mlcc - smd/smt 50v 0.015uf c0g 0805 1% aec-q200, diodes - general purpose, power, switching 100v io/200ma bulk, headers & wire housings 2.5mm vert hdr 9p shrouded, headers & wire housings unshrd vert sngl 2, rf connectors / coaxial connectors pc bh recept, headers & wire housings 2.5 vert hdr spox 6p shrouded, metal film resistors - through hole yr1 0.1% 634r, trimmer resistors - through hole 1/4" 1mohms 10% sq w/standoff sealed, metal film resistors - through hole 1/4watt 10kohms .1% 10ppm, metal film resistors - through hole 100kohm 1/4w 15ppm, metal film resistors - through hole 1/2w 40kohms .1%, thick film resistors - smd 1/4watt 17.8kohms 1%, thick film resistors - smd 0805 anti-surge res. 0.1%, 2kohm, trimmer resistors - smd 6.35mm 1/4" 12-turn sealed, ldo voltage regulators adj 1.1a 1x res l drop reg, analog comparators fast prec comparator, instrumentation amplifiers ad620 amplifier low drift low power, monostable multi-vibrator sngl retriggerable mono multivibrator, standard clock oscillators l pwr, 1khz to 20mhz res set sot-23 osc, active filters v low offset clk sweep bessel filter, logic gates quad 2-input and gate, precision amplifiers sgl-supply rr lo pwr fet-inpt, headers & wire housings spox crimp hsg 6p, low signal relays-pcb 1a 12vdc dpdt non-latching pcb, bipolar transistors - bjt npn general purpose, pot trimmer resistors - through hole 3/8" 100kohms sealed vertical adjust, amphenol rf rf connectors / coaxial connectors pc bh recept, aluminium electrolytic capacitors - radial leaded 1000uf 50v 16x25 high vibration, rf connectors / coaxial connectors bnc straight crimp plug rg223, 4 pole power contactor, 3 pole power contactor, rf adapter -in series bnc jack blkhd adapter iso–50 ω

Central Government And Public Sector

CTN :45731228

06 Jul, 2026 NA

Lumding - Assam

Tender For supply of pvc insulated sheathed twin flat (2 core) 4.0 sq.mm cable with stranded aluminium conductor, pvc insulated and pvc sheathed, suitable for 660/1100 volts grade, conforming to is:694:2010 with latest amendments. make: gold medal/richa/finolex. (hsn code- 85444999) (note : 30% discount + 18 % gst from the uploaded rate reference) [ warranty period: 30 months after the date of delivery] ]

Central Government And Public Sector

CTN :45736230

02 Jul, 2026 NA

Lumding - Assam

Tender For supply of tertiary station name board/ diagonal boards. boards shall be of high strength one piece 600mmx 600mm square shape powder coated in ral 9003 to minimum 50um thickness on both sides, with three point bending flexural test of the board collar greater than 7800n. primary collar of height 20mm with corners of r 45mm for prevention of accidental injury shall be stretch roll formed to 90 degree to sign face, without involving any cutting and welding and secondary collar of 20mm width, shall be bend inward to 90 degree to primary collar for installation purpose. this board shall be made of 2mm thick aluminum sheets, 2mm thick roll formed s.s clamping plate which shall be firmly rotatory riveted to secondary collar. approved test and graphics shall be eco friendly printed on retro reflective sheets astm d 4956 it madein three colors and three languages hindi, english and regional language and firmly pasted on sign face noinstallation hardware shall be visible from the sign face. this board shall not have any separate back frame for strengthening. all hardware items used shall be of ss304 grade, high tensile and anti theft nuts shall beused in all type of installation, all charges including gst and installations. make superior quality or similar. note- due to gm inspection in lmg materials are urgently required and installed within 7 days from the date of p.o [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45364296

06 Jul, 2026 2.96 Lacs

Jabalpur - Madhya Pradesh

Tender For corrigendum : procurement of utensils and other materials for operation of canteen run by indian societyat block no 10 of shakti bhawan rampur jabalpur. - offer will be evaluated on the basis of grand total amount of entire items as one package as a whole and not rate/amount of individual items, stainless steel tea spoon ( baby spoon), stainless steel table spoon big size for lunch), stainless steel katori ( small) 100 ml minm. weight 50 gm each 22 gage thickness., stainless steel thali (railway size), minm. 15.5" dia, 22 gage thickness, weight 500 to 600 gm each, good quality, steel thali snack/breakfast purpose (three column) good quality, ss tea container (10 litter), stainless steel saucepan (no. 13), stainless steel saucepan (1 litter), stainless steel vessels with top ( 20 litre capacity) 6 kg approx. 22 gauge each, stainless steel vessels with top ( 10 litre capacity) 4 kg approx. 22 gauge each, stainless steel vessels with top ( 5 litre capacity) 2 kg approx. 22 gauge each, stainless steel vessels with top ( 2 litre capacity) 2 kg approx. 22 gauge each, steel tiffin carrier(5 dabba for 50 person), steel dust bin with top big size, wet grinder ( 5 ltr), dosa bhatti with s.s. frame m s tawa 18 mm thcik ( high pressure ) lpg based 42 " x 22 " x 36 ", folding table size 4 x 2 (for food arrangement) galvanize, stainless steel table with under shelves (60" x 30" x 34")(washing), stainless steel washing zink (three coloumns), aluminium partition section (service counter) with three window

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45726549

20 Jul, 2026 NA

Wardha - Maharashtra

Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the light fittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as

By Cities

By States

By Agencies

By Ownerships

By Sectors