Bridges Tenders

State Government

CTN :45544772

04 Jul, 2026 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of span bolt and nut (q3) , square head bolts (q4) , flap wheel (q3) , self drilling screw (q3) , hexagon head screw as per iso 4017 (q3) , compression screw (q4) , sand paper (defense) (q3) , hexagonal black bolt as per bs : 916 (q3)

State Government

CTN :45743448

07 Jul, 2026 93.53 Lacs

Delhi - Delhi

Tender For road restoration for road cut by bses through open trench for the laying of 220 kv cable from palam flyover at mp road no-201 to mp road no-224 in dwarka zone

Corporations/Associations/Others

CTN :45735275

15 Jul, 2026 1.95 Crore

Warud - Maharashtra

Tender For construction of minor bridge across chudamani river at mirchi plot ward no.1 near kedareshwar mokshadham warud,under municipal council warud tq.warud dist.amravati

Corporations/Associations/Others

CTN :45700597

01 Jul, 2026 NA

Chandrapur - Maharashtra

Tender For material supply for water supply department municipal council mul (3rd time) - ci marerial list, 350mm mechanical joint coller, 350 mm tailpiece, 350mm valve, 350 mm all flange tee, 350mm*350mm*80mm tee, 300mm mechanical joint coller, 300 mm tailpiece, 300mm valve, 300 mm all flange tee, 300mm*300mm*80mm tee, 250 mm mechanical joint coller, 250 mm tailpiece, 250 mm valve, 250 mm all flange tee, 250 mm* 250 mm*100mm tee, 250 mm* 250 mm*80mm tee, 150 mm mechanical joint coller, 150 mm tailpiece, 150 mm valve, 150 mm all flange tee, 150 mm* 150 mm*100mm tee, 100 mm mechanical joint coller, 100 mm tailpiece, 100 mm valve, 100 mm all flange tee, 100 mm* 100 mm*100mm tee, 350 mm bend, 300 mm bend, 250 mm bend, 200 mm bend, 150 mm bend, 100 mm bend, 350mm di k9 pipe, 300 mm di k9 pipe, 250mm dik9 pipe, 150 mm dik7 pipe, 100 mm di k7 pipe, nut bolt, washeer, reducer 350*300, reducer 300*250, reducer 250*150, reducer 150*100, dummy flange 350 mm, dummy flange 250 mm, dummy flange 200 mm, dummy flange 150 mm, dummy flange 100 mm, air valve 80 mm, air valve 40 mm, air valve ball 4 inch, air valve ball 3 inch, rubber ring 350 mm, rubber ring 300 mm, rubber ring 250 mm, rubber ring 200 mm, rubber ring 150 mm, rubber ring 100mm, rubber sheet, nut bolt with washer 3 inch 4thread and 5thread, nut bolt with washer 4 inch 4 thread and 5thread, nut bolt with washer 9 inch full thread, nut bolt with washer 12 inch full thread, pvc material, pvc mecanical joint 100 mm, pvc mechanical joint 180 mm, pvc pipe 90 mm 6 kg/cm2, pvc pipe 150 mm 6 kg/cm2, pvc 90 bend 90 mm, pvc 90 bend 150 mm, hdpe material, hdpe pipe 110 mm per mtr, hdpe pipe 90 mm per mtr, hdpe pipe 125 mm per mtr, hdpe pipe 160 mm per mtr, hdpe pipe 180 mm per mtr, hdpe pipe 225 mm per mtr, couplers 90, couplers 110, coupler 125, coupler 160, couplers 180, couplers 225, couplers 125, couplers 160, equal tee 110, equal tee 180, equal tee 225, elbow 90 deg. 110, elbow 90 deg. 180, elbow 90 deg. 225, end cap 110, end cap 180, end cap 225, 225*180 reducer, 180*110 reducer, 225*100 reducer with fusion, 110*90 reducer with fusion, 125*110 reducer with fusion, 110*75 reducer with fusion, connection material, hdpe saddle taping tee 110 mm, hdpe saddle taping tee 180 mm, ferule 0.5 inch, ft 0.5 inch, mdpe pipe 0.5 inch per mtr, mdpe bend 0.5 inch, mdpe coupler 0.5 inch, mdpe valve 0.5 inch, upvc pipe 0.5 inch, upvc bend 0.5 inch, upvc coupler 0.5 inch, pvc saddle 0.5 inch 110 mm, pvc saddle 0.5 inch 160 mm, pvc saddle 0.5 inch 180 mm, upvc valve 0.5 inch, solution per ltr, upvc brass socket 0.5 inch, upvc brass elbow 0.5 inch, pvc socket 0.5 inch, pvc elbow 0.5 inch, pvc mt 0.5 inch, upvc union, pvc tap, teflon tape, upvc socket 0.5 inch, upvc elbow 0.5 inch, end cap pvc/upvc, water meter washer rubber, mdpe washer, borewell material, rod assembly, head with cover, water tank, handle bar, thread play, tox with n ut, rod coupling, cylinder body cap and base lever, cylinder rod, chain with nut, upper valve assembly, floor valve uv, washer uv, lower valve assembly, rubber set, check valve, tikli avuv, pump bucket lether, sealing ring, 12 to 40 mm nut wheel (bolt) per kg, connecting rod, 32 mm gi pipe isi mark, borewell socket 1.25 inch, hand pump set complete isi mark, bearing, axle pin no 6204, borewell cylinder isi mark, lever, ring rubber washer, karori leteher washer, borewell chain spanner 100mm, borewell chain spanner 75 mm, borewell threading machine, chain pully 3 ton long chain, wise large size 4 size, chamber for borewell cement concrete /brick masonaary, di pipe 350mm, sluise valve 100mm, sluise valve 150mm, sluise valve 200mm, sluise valve 250mm, ci joint 350mm, ci joint 250mm, ci joint 100mm

Central Government/Public Sector

CTN :45730558

17 Jul, 2026 NA

Firozpur - Punjab

Tender For trd work against various engg works over firozpur division in c/w (i)- elimination of manned l-xing no. s-63 at km 433/27-28 by providing limited height subway of internal size 5m x 5m on juc-bes section (between juc-srx) by pushing method in the section under aden/juc (ii)- provision of 3.00m wide covered light weight rob near lc no. s-3 on ldh-dui section under aden/ldh, (iii)- construction of 5m x 3.5m lhs in lieu of closed level crossing no. c-7 on juc-nro section by pushing method under aden/juc, (iv)- construction of 3.00m wide covered fob with ramp for pedestrian at km 366/16-18 on snl-asr section and (v)- replacement of existing steel girder bridges with psc slab having span upto 12.20m & 3.66m of various bridges in the jurisdiction of aden-ii/fzr.

Central Government/Public Sector

CTN :45743875

28 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

Central Government/Public Sector

CTN :45389601

28 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : tender for request for proposal (rfp) for appointment of authority engineer for providing project management services for design and construction of new rail cum road bridge no.11 over river ganga, 50 meters downstream of the existing old malviya bridge near kashi railway station, including sub structure and super structure of the bridge (8 x 108.5 m + 2 x 103.3 m open web steel girder) for four line tracks on lower deck and six lane road on upper deck, including railway and road approaches as per gad along with associated ohe works and general electric works in lucknow division of northern railway at varanasi, uttar pradesh, india

Central Government/Public Sector

CTN :45730697

21 Jul, 2026 NA

Kanpur - Uttar Pradesh

Tender For ohe modification work in connection with provision of high level platform towards line no. 1 at kanpur bridge station left bank (cpb) station of lucknow division.

State Government

CTN :45684772

01 Jul, 2026 58.85 Lacs

Kendujhar - Odisha

Tender For corrigendum : rehabilitation of hl bridge over river baitarani from p8 to p9 on salapada anandapur road mdr at ch 1.100 km for the year 2026 27

State Government

CTN :45702359

01 Jul, 2026 1.99 Lacs

Rohtak - Haryana

Tender For a/mtc of 3 lane bridge on nh-10, u/e, rohtak, `“supply and laying of wmm, go greenpatch shelmac (p.r.) an instant pothole repair product and providing and fixing of cat eyes anddelineators at 3 lane bridge on nh-10, u/e, rohtak and all other works contingent thereto”.

By Cities

By States

By Agencies

By Ownerships

By Sectors