Building Material Tenders

Central Government/Public Sector

CTN :45024438

19 May, 2026 60.0 Thousand

Amritsar - Punjab

Tender For supply of curtain - pipe , bracket , ring , curtain , screw , knob

Central Government/Public Sector

CTN :45031557

07 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, brake beam and truss bar, nut-bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate, bottom plate, ,sbs plate, anchor plate, hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw coupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly , main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, silent block yoke pin support plate, lashing chain, buckle, roller, backing ring, spacer, distance ring, cone assembly and other parts of ctrb, wire supporting hook, protecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod,coupler rod, small cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis].

Central Government/Public Sector

CTN :45037306

08 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of door stopper spring to rcf drg. no. lw 56475, alt. f, item no. 19. material ms with powder coated having thickness of powder coating 50 micron and colour - off white or ivory. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45037640

01 Jun, 2026 NA

Hoshangabad - Madhya Pradesh

Tender For supply of set of spares for eversure make air flow relays (7 items 21 nos.), (1) diaphragm with g.f. nylon centre disc and gasket ring for qvsl/qvmt/qvrh relays to drg. no. eee/afr/05 rev.-1 ref.- 1, 05 nos., (2) diaphragm with g.f. nylon centre disc and gasket ring for qvsi relays to drg. no. eee/afr/06 rev.-1 ref.- 1, 02 nos., (3) diaphragm pressure adjustment assly. with switch operating knob and spring complete for qvmt relays to drg. no. eee/afr/05 rev.- 1 ref.- 16,17,18,19 and 21 (colour code white), 02 nos., (4) diaphragm pressure adjustment assly. with switch operating knob and spring complete for qvsl/qvrhrelays to drg. no. eee/afr/05 rev.- 1 ref.- 16,17,18,19 and 21 (colour code black), 03 nos., (5) diaphragm pressure adjustment assly. with switch operating knob and spring completefor qvsi relays to drg. no. eee/afr/06 rev.- 1 ref.- 16,17,18,19 & 21 (colour code green), 02 nos., (6) micro switch assly. qvmt/qvsl/qvrh relays to drg. no. eee/afr/05 rev.- 1 ref.- 6,7,8,9,10,12 & 13, 05 nos., (7) micro switch assly. qvsi relays to drg. no. eee/afr/06 rev.- 1 ref.- 6,7,8,9,10,12 & 13, 02 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45002749

16 May, 2026 1.22 Crore

Jaduguda - Jharkhand

Tender For annual civil maintenance and development works in ucil housing colony jaduguda for one year d d - earth work in excavation , filling available excavated earth , filling in plinth with sand , dismantling old plaster , demolishing cement concrete , cleaning jungle , demolishing brick work , plain cement concrete 1 isto 3 isto 6 , plain cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1 5 isto 3 , steel reinforcement , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , 25mm thick cement concrete flooring , the overhead tank , asbestos cement sheet , g i sheet in roofing , structural steel work , 35mm thick isi marked flush door , 24 mm thick factory made pvc door shutters , white washing , water proofing cement paint , premium acrlic smooth exterior paint , white cement based putty , acrylic emulsion paint , cleaning of overhead water tank , renewing glass panes , paver block , vitrified tiles , ceramic glazed wall tiles , orissa pattern w c pan , european type w c pan , white vitreous china wash basin , vitreous china wash basin , mirror of superior glass , flushing cistern , low level cistern , pedestal type w c pan , 15 mm bided or jet spray , c p brass shower rose , c p brass angle valve , brass stop cock , close hole wall mixer tap , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , 75 mm plain bend , 100 mm plain bend , 15 mm g i pipes , 20 mm g i pipes , 15mm normal bore g i union , 20 mm normal bore g i union , c p brass extension nipple , p v c waste pipe 32 mm dia , c p brass bib cock , brass bib cock , brass extension nipple , ball valve , renewal of old putty , excavating trenches , surface dressing , transportation of excavated earth , foundations or footings or bases of column etc. for mass concrete , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , water proofing treatment , synthetic enamel paint , cement primer , chain link , 18 mm thick granite

State Government

CTN :44382614

30 Apr, 2026 34.09 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply of general consumables/ house keeping items/ hospital linen/ disinfectant items & other miscellaneous items - vats chitwood debakey clamp 80mm 2x3 debakey curved left jaws wl-230mm tl-320mm d-10mm with ratchet, trocar and cannula for thoracoscopy dia.10mm l-70mm streaked tube, mis marland forceps 5mm jaws 17 inches l440 mm diam-5 mm with ratchet and hf connection, mis marland forceps 5mm jaws 14 inches l360 mm diam-5 mm with ratchet and hf connection, tray for miscellaneous instruments of obadia ii set perforated 540x253x70mm with lid and accessories, tray for 15 mis instruments of obadia ii set perforated 540x253x70mm with lid and accessories, tray for retractors of obadia ii set perforated 540x253x70mm with lid and accessories, inox fine mesh basket with lid 80x80x34mm, satinsky scissors s-shaped l-250mm, mini thoracotomy retractor for dr takahashi, mis needle holder l-250mm straight tungstene dia.6mm easy to lock, mis needle holder l-250mm curved tungstene dia.6mm easy to lock, finger extension knot pusher l-50mm, mis nerve and vessel hook with adjustable length l min-200mm l max-270mm, mis scissors l-250mm strongly curved dia. 5mm / 7mm, mis scissors l-250mm curved dia. 5mm / 7mm, strong cardiovascular scissors l-220mm supercut, mis rongeur 45 degree up l- 230mm jaws - 6 x12mm, working length - 150mm, mis rongeur l- 230mm jaws - 6 x12mm, working length - 150mm, mis suction tube for aortic annular l-260mm double curved, hand retractor with grooved malleable blade l-20mm with adjustable length l min-230mm l max-300mm, handheld retractor for protecting during mini sternotomy l-230mm l-25mm, mis scalpel blade holder for blades 10, 11, 12, 15, 18, 19 with adjustable length l min-180mm l max-250mm, yan mini-access retractor and 3 pairs of blades 36 x30mm and 36 x40mm and 36 x50mm, sq 53 skin anitseptic solution dorbimax 500 ml, endoscopic suture ruler l-380mm, mis nerves and vessels double hook l-330mm, pr bouchot flexible endoscopic retractor 48mm diameter short use, pr bouchot flexible endoscopic retractor 44mm diameter short use, pr bouchot flexible endoscopic retractor 40mm diameter short use, pr bouchot circular retractor 36mm diameter short use, mis scalpel blade holder for blades 10,11,12,15,18,19, mis magnetic retriever, mis suture catcher l-280mm, mis polymere tip knot pusher l-350mm, mis needle holder l-360mm curved tungstene dia.6mm easy to lock, mis needle holder l-360mm straight tungstene dia.6mm easy to lock, mis scissors l-360mm strongly curved dia. 5mm / 7mm, mis scissors l-360mm curved dia. 5mm / 7mm, mis resano forceps l-360mm dia.5mm, mis atraumatic forceps l-360mm straight dia.5mm, mis suction tube l-330mm, short use soft blades pair for obadia c-ring retractor, obadia c-ring retractor for mini-thoracotomy dia. 250mm max opening - 100mm without blades, forceps for articulated blades, forceps for flexible blade, short use flexible blade for obadia retractor, obadia 3d retractor for flexible blade with articulated blades (3 blades- 35x30mm and 35x40mm and 35x50mm), refilling of nitric oxide gas 1000ppm 10 ltr water capacity btype aluminium cylinder, penelope ino patient circuit for adult, penelope ino patient circuit for peadiatric, penelope ino patient circuit for neonatal, stainless steel shopping mall trolley, mopping 2 bucket plastic trolly (biosafety certified) each bucket should be 12 ltrs capacity each (25 ltrs) trolly should be stainless steel, mopping 2 bucket plastic trolly (biosafety certified) each bucket should be 15 ltrs capacity each (30 ltrs) trolly should be stainless steel, mopping 3 bucket plastic trolly (biosafety certified) each bucket should be 20 ltrs capacity each (50-54 ltrs) trolly should be stainless steel, protective shoes (frount covered) breathable, tissue dispenser, clave connector-3m, social hand wash solution -500ml, chlorhexidine mouth wash (0.1-0.2percentage)- 100ml, fogging machine, chlorhexidine gluconate 1 percentage, ehtyl alcohol 61percentage -500

State Government

CTN :44362179

30 Apr, 2026 18.39 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply of accessories/ consumables/ spares for medical equipment - temperature cable for blt monitor part no 15-031-0066, accessories stand,wall mount for blt monitor part no 15-031-0099, nibp hose cable for blt monitor part no 15-031-0008, nibp cuff adult for blt monitor part no 15-100-0118, spo2 sensor clip type (one piece)for blt monitor part no 15-100-0358, spo2 sensor clip type for blt monitor part no 15-100-0320, spo2 analog extension cable for blt monitor part no 15-100-0357, five-5 lead ecg cable set clip type for blr monitor part no 15-031-0022, five-5 lead ecg cable set snap type for blt monitor part no 15-031-0002, three-3 lead ecg cable set for blt monitor part no 15-031-001, rs232 communication board for schiller tmt machine (stmt), kit screw stickers epure- sav-01-0024 for ot light, model epure, ball values for drain for-ultrasonic instrument cleaner, epure keybord- sav-01-0025 for ot light, model - epure, analog timer for ultrasonic instrument cleaner., cover glass 1 complete set for famed -mobile lamp., reusable bipolar with fixed plug , 3m-for electro surgical unit (cautary unit) make- eschmann, model- td830, mattress head section (50mm) t20-431-0001), vpx exhaust hose part no-216018 for eschmann suction unit -1no, compressor for sarns tcm ii, battery li-ion - schiller ecg machine, kit sp2 x battery 12 v,80 w hrl 1280 w-part no 001-20-0058, three axis pcb for ot table make- eschmann , model t20a & t20a+ installed at major ot, vpx valve hose part no-216013 for eschmann suction unit, vpx vacuum gauge part no-743077 for eschmann suction unit, vpx vacuum control valve part no-216059 for eschmann suction unit, vpx manifold hose part no-216016 for eschmann suction unit, vpx handle bar grip part no-216076 for eschmann suction unit, vpx gauge hose part no-216014 for eschmann suction unit, thermal print head for schiller ecg machine, hv board for defibrillator dg 400 for schiller defibrillator, recorder paper for schiller defibrillator, thermal printer head with rollar for schiller defibrillator, battery for schiller defibrillator, recorder pcb for schiller defibrillator, adult contact plate for schiller defibrillator, left and right keypad for schiller defibrillator, left and right keypad pcb for schiller defibrillator, paddle pcb for schiller defibrillator, encoder knob for schiller defibrillator, smps module for schiller defibrillator, relay interface board for schiller defibrillator, lcd for schiller defibrillator, hv board 200j for schiller defibrillator, wooden platform for schiller tmt machine (stmt), walking belt for schiller tmt machine (stmt), nibp tube 3m-reusable-2601195 for monitor, model- vista-120, make- drager, smps for schiller tmt machine (stmt), relay board for schiller tmt machine (stmt), opto coupler - speed for schiller tmt machine (stmt), opto coupler - elevation for schiller tmt machine (stmt), main transformer for schiller tmt machine (stmt), main motor for schiller tmt machine (stmt), iu pcb for schiller tmt machine (stmt), interface cables edc to iu, tmt to iu for schiller tmt machine (stmt), eprom for schiller tmt machine (stmt), elevation motor for schiller tmt machine (stmt), edc pcb for schiller tmt machine (stmt), ac drive unit for schiller tmt machine (stmt), ten lead patient cable for schiller tmt machine (stmt), expiratory valve for evita, reusable-8410580, safely disk for maquet (datascope) iabp machine- data scope, recorder board for maquet (datascope) iabp machine- data scope, purge assembly for maquet (datascope) iabp machine- data scope ., pressure transducer cable for maquet (datascope) iabp machine- data scope ., power supply module for maquet (datascope) iabp machine- data scope ., motor controller pcb for maquet (datascope) iabp machine- data scope ., modem board for maquet (datascope) iabp machine- data scope ., main cpu pcb for maquet (datascope) iabp machine- data scope ., front end pcb for maquet (datascope) iabp machine- data scope., fill assembly for m

Central Government / Public Sector

CTN :45037589

20 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of set of hardware items and ss fittings for providing 1) additional side filling arrangement for watertank (2x685l) to rcf drawing no. le63279, alt.-nil- 01 set 2) additional side filling arrangement for water tank (450l) to rcf drawing no. le63280, alt.-nil-01 set material to be supplied as per annexure [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45025635

07 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For set of overhauling kit items required for lp/alp seat assembly of ac electric locomotive consisting of 10 items as follows. 1)lead screw & bush. qty/set. = 01 no. 2)rotating stopper pin. qty/set. = 01 no. 3)big spring. qty/set. =01 no. 4)connecting bush. qty/set. = 01 no. 5)handle knob. qty/set. = 01 no. 6)foot lever welding assembly. qty/set. = 01 no. 7)handle assembly. qty/set. = 01 no. 8)gear & gear casing. qty/set. = 01 no. 9)lead screw & bracket welding. qty/set. = 01 no. 10) split pin 04 x 40. qty/set. = 01 no. note: one sample set should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45024411

19 May, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of door switch for illuminating lamp as per annexure 1 , door switch for led tube as per annexure 1 , emergency stop push button as per annexure 1 , hrc fuse and link as per annexure 1 , indicating lamp as per annexure 1 , time delay relay as per annexure 1 , under and over voltage with phase failure and phase reversal protection relay as per annexure 1 , motor protection on delay timer 1no plus 1nc as per annexure 1

By Cities

By States

By Agencies

By Ownerships

By Sectors