Casting And Structurals And Fabrications Tenders

Central Government/Public Sector

CTN :45240285

21 May, 2026 NA

Sepahijala - Tripura

Tender For supply of tent extendable frame supported with mild steel joints and flooring tpo (q3)

Central Government/Public Sector

CTN :45242093

01 Jun, 2026 NA

Multi City - Multi State

Tender For supply of harness of underframe and roof arrangement for lhb hot buffet type coaches, as per drawing: edts256,rev-k,cor-3, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as per instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item,drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45078720

02 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of harness of lhb eog non -ac lscn coaches with fdb on cabin side area only, as per drawing: edts452, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed ina wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as perinstructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45242032

02 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of harness of lhb eog non -ac lscn coaches with fdb on cabin side area only, as per drawing: edts452, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed ina wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as perinstructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item, drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45241160

22 May, 2026 NA

Kapurthala - Punjab

Tender For supply of double inlet centrifugal blower., as per drawing: edts331,rev-a,type-1, corr. 3,packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming mono block pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. , quality plan: n.a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45184718

01 Jun, 2026 NA

Kapurthala - Punjab

Tender For corrigendum : supply of harness of underframe and roof arrangement for lhb hot buffet type coaches, as per drawing: edts256,rev-k,cor-3, packing instruction: cable harness: complete one coach set cable harness to be protected with biodegradable transparent polythene sheet and packed in a wooden box. soft eco-friendly packing material hay,straw, etc be provided inside the wooden box to protect any damage to cable insulation while packing/unpacking.bottom frame to be made of wooden planks 20mm thick & should have support of atleast 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. rigid pvc conduit supplied loose along with harness should be packed as per instructions .the material used for product packaging shall be eco-friendly.a list should be pasted on each packing showing order no ,pl no, description of the item,drg.no/spec.no, qty , firm's name &address and date of despatch etc. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

Central Government/Public Sector

CTN :45241353

28 May, 2026 NA

Vadodara - Gujarat

Tender For supply of composite mesh hydrophilic 3d multifilament polyester large macroporous with pore size 2.4 x 2.0 mm (height x width) macropore 4.8 x 2.0 mm (height x width) thickness 1.7mm surface density 78g/m2 with multidirectional elasticity with absorbable type 1 collagenfilm and 4 prefixed transa bdominal sutures of nylon 2-0 with innovative x stich 15 x 10 cm ]

Central Government/Public Sector

CTN :45183355

25 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of boroscope-inspection equipment with video camera to model no: hsetin ht-660 or its equivalent, supported withjpeg/bmp image format, capable from 20 ms -100 ms range for long distance viewing of defects out of the probe range along with the following features such as : (a) articulation probe on all directions (min 900 deg) with minimum length 8 mtr and outer diameter(+/- 0-2mm):8.0 to 8.5, (b) image sensor: ccd, (c) power sorce:230 volt + 50hz, (d)camera resolution(mp) : 4,display type: lcd, (e) dov:0 deg, fov:90 deg, dof:5mm, (f) display screen size: 6" to 7", (g)display resolution:1024 x 768, (h) memory(internal storage):32 gb, (i)connectivity: usb, (j)power source: rechargeable li-ion battery, (k)platform type: desktop based, (l) system ingress protection:ip65 or more, (m) light intensity in between 0-100%, temperature sensor mounted with warning display on screen to remove the probe before exceeding temperature limit of ccd camera n) to access through joystick for better flexibility, communicate with computer in way to transfer files of videos and images between main unit and standalone pc and network. note: provided along with operating manual. accepted make/brand: mx rady make hsetin ht-660. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :44216446

01 Jun, 2026 NA

Mahisagar - Gujarat

Tender For corrigendum : supply of miscellaneous and consumable items for mmd/ws at khep - v belt d-238, v belt a-28, v belt c-105, rubber spider for love joy coupling size l-095, ci love joy coupling size l-095, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100 percent neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, anabond unadrobic adhesive & sealand no-610, fevi kwik tube 3 grams, m seal fast curing epoxy compound, each packet contains 50 grams of resin base and 50 grams of hardener ( 1 kg box contains 10 packets), belzona super metal, measure tape 5 meter, britelite 1200 meters long rang torch rechargeable led flashlight with charger, impact wrench power/battery operated, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, grease gun, bench vice size 4", bench vice size 8" (netco make), long nose plier, insulated with thick c.a. sleeve,generally confirming to is 3552-1989, product no:1430-6., circlip plier internal (bent nose),product no: 1442.7,capacity :19.6 mm, length:180 mm, taparia or jhalani or any equivalent make, combination plier ,185mm lenth, hand drill machine size 10mm, grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, mini angle grinder 100 mm, grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36), ag-4 cutting wheel make:bosch, electrically operated portable cut off saw (for tube cutting), wheel size:355mm, arbour size: 25.4mm, scissors size: 10", wire brush with wooden handle size 50x150x300 mm, 3/4" polypropylene rope for normal mechanical work, manila rope, size: 16 mm dia, manila jute rope size 12 mm, ms nipple 1/2", nipple 3/4", nipple 1", ms nipple size 2", hss hacksaw blade size 300x12.5x0.63 mm, hss hacksaw blade size 12"x1/2"x24 tpi bipic, grits 150 emery cloth roll of 50mtr. length and 50mm width, emery paper smooth fine size 38 mm x 50 m length, portable welding machine, gas cutting torch cutogen esab make, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, flash back arrestor for cutting torch end mounted oxygen, flash back arrestor for cutting torch end mounted da, flash back arrestor for regulator mounted da cylinder.

By Cities

By States

By Agencies

By Ownerships

By Sectors