Ceiling And Flooring And Plaster Tenders

State Government

CTN :45733827

06 Jul, 2026 28.13 Lacs

Delhi - Delhi

Tender For providing and fixing pvc wall panelling in gymnasium and administrative block, repairs to false ceiling in gymnasium and squash courts, providing and fixing g.i. profile sheet in parking area, polishing of flooring in squash courts and other

Corporations/Associations/Others

CTN :45700597

01 Jul, 2026 NA

Chandrapur - Maharashtra

Tender For material supply for water supply department municipal council mul (3rd time) - ci marerial list, 350mm mechanical joint coller, 350 mm tailpiece, 350mm valve, 350 mm all flange tee, 350mm*350mm*80mm tee, 300mm mechanical joint coller, 300 mm tailpiece, 300mm valve, 300 mm all flange tee, 300mm*300mm*80mm tee, 250 mm mechanical joint coller, 250 mm tailpiece, 250 mm valve, 250 mm all flange tee, 250 mm* 250 mm*100mm tee, 250 mm* 250 mm*80mm tee, 150 mm mechanical joint coller, 150 mm tailpiece, 150 mm valve, 150 mm all flange tee, 150 mm* 150 mm*100mm tee, 100 mm mechanical joint coller, 100 mm tailpiece, 100 mm valve, 100 mm all flange tee, 100 mm* 100 mm*100mm tee, 350 mm bend, 300 mm bend, 250 mm bend, 200 mm bend, 150 mm bend, 100 mm bend, 350mm di k9 pipe, 300 mm di k9 pipe, 250mm dik9 pipe, 150 mm dik7 pipe, 100 mm di k7 pipe, nut bolt, washeer, reducer 350*300, reducer 300*250, reducer 250*150, reducer 150*100, dummy flange 350 mm, dummy flange 250 mm, dummy flange 200 mm, dummy flange 150 mm, dummy flange 100 mm, air valve 80 mm, air valve 40 mm, air valve ball 4 inch, air valve ball 3 inch, rubber ring 350 mm, rubber ring 300 mm, rubber ring 250 mm, rubber ring 200 mm, rubber ring 150 mm, rubber ring 100mm, rubber sheet, nut bolt with washer 3 inch 4thread and 5thread, nut bolt with washer 4 inch 4 thread and 5thread, nut bolt with washer 9 inch full thread, nut bolt with washer 12 inch full thread, pvc material, pvc mecanical joint 100 mm, pvc mechanical joint 180 mm, pvc pipe 90 mm 6 kg/cm2, pvc pipe 150 mm 6 kg/cm2, pvc 90 bend 90 mm, pvc 90 bend 150 mm, hdpe material, hdpe pipe 110 mm per mtr, hdpe pipe 90 mm per mtr, hdpe pipe 125 mm per mtr, hdpe pipe 160 mm per mtr, hdpe pipe 180 mm per mtr, hdpe pipe 225 mm per mtr, couplers 90, couplers 110, coupler 125, coupler 160, couplers 180, couplers 225, couplers 125, couplers 160, equal tee 110, equal tee 180, equal tee 225, elbow 90 deg. 110, elbow 90 deg. 180, elbow 90 deg. 225, end cap 110, end cap 180, end cap 225, 225*180 reducer, 180*110 reducer, 225*100 reducer with fusion, 110*90 reducer with fusion, 125*110 reducer with fusion, 110*75 reducer with fusion, connection material, hdpe saddle taping tee 110 mm, hdpe saddle taping tee 180 mm, ferule 0.5 inch, ft 0.5 inch, mdpe pipe 0.5 inch per mtr, mdpe bend 0.5 inch, mdpe coupler 0.5 inch, mdpe valve 0.5 inch, upvc pipe 0.5 inch, upvc bend 0.5 inch, upvc coupler 0.5 inch, pvc saddle 0.5 inch 110 mm, pvc saddle 0.5 inch 160 mm, pvc saddle 0.5 inch 180 mm, upvc valve 0.5 inch, solution per ltr, upvc brass socket 0.5 inch, upvc brass elbow 0.5 inch, pvc socket 0.5 inch, pvc elbow 0.5 inch, pvc mt 0.5 inch, upvc union, pvc tap, teflon tape, upvc socket 0.5 inch, upvc elbow 0.5 inch, end cap pvc/upvc, water meter washer rubber, mdpe washer, borewell material, rod assembly, head with cover, water tank, handle bar, thread play, tox with n ut, rod coupling, cylinder body cap and base lever, cylinder rod, chain with nut, upper valve assembly, floor valve uv, washer uv, lower valve assembly, rubber set, check valve, tikli avuv, pump bucket lether, sealing ring, 12 to 40 mm nut wheel (bolt) per kg, connecting rod, 32 mm gi pipe isi mark, borewell socket 1.25 inch, hand pump set complete isi mark, bearing, axle pin no 6204, borewell cylinder isi mark, lever, ring rubber washer, karori leteher washer, borewell chain spanner 100mm, borewell chain spanner 75 mm, borewell threading machine, chain pully 3 ton long chain, wise large size 4 size, chamber for borewell cement concrete /brick masonaary, di pipe 350mm, sluise valve 100mm, sluise valve 150mm, sluise valve 200mm, sluise valve 250mm, ci joint 350mm, ci joint 250mm, ci joint 100mm

Corporations/Associations/Others

CTN :45532318

09 Jul, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For corrigendum : repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clau

State Government

CTN :45655945

06 Jul, 2026 24.99 Lacs

Dapodi - Maharashtra

Tender For corrigendum : supply of handpump spare parts at pune zp - supply of handpump spare parts, die set 12mm with handle & bits, hydraulic vice 32 mm., heavy duty clamp 32 mm, heavy duty clamp 65 mm, connecting rod vice, pipe lifter spanner for 32mm n.b.pipe., pipe wrench 300 mm, pipe wrench 450 mm, pipe wrench 600 mm, pipe wrench 900 mm, double ended open jaw spanner 17 * 18 in c.v. steel, hacksaw frame, pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7), sealing ring for deepwell handpumps (is: 15500 part 7), hex nut with bolt m 12 * 40, handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4), single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps, chain nut with bolt m-12x40 (is: 15500 part 4), chain with coupling for deep well hand pump, head for deepwell hand pump (is: 15500 part 4), third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll), water tank for deepwell hand pump (is: 15500 part 4) (im-ll), connecting nrod of 12 mm dia. x 3 mtr. length, i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal)diameter 32 mm , length 3 meter, cylinder assembly i.m.ii, cylinder body with brass liner for deepwell hand pump (is: 15500 part 5), reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll), upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll), upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll), lower valve assembly i.m.ii, hacksaw blade (high speed steel), spacer g.m. i.m.ii, rubber seat lower valve (im-ll), rubber seat upper valve (im-ll)

State Government

CTN :45696491

02 Jul, 2026 NA

Gondia - Maharashtra

Tender For corrigendum : supply of material fro gp mundipar ishawar recall 2nd - list of material, metal 80 mm with royalti, metal 40 mm with royalti, metal 20 mm with royalti, bajri 10 mm with royalti, sand with royalti, cement 53 grade isi mark, steel isi mark 6 mm, steel isi mark 8 mm, steel isi mark 10 mm, steel isi mark 12 mm, steel isi mark 16 mm, soil bricks std size, fly ash/cement bricks, supply of soft murum with royalti, supply of soil with royalti, carting of murum, carting of soil /excavated waste, concrete mixture, excavator backaloader (jcb/hyundai/cat/mahindra etc), static roller, water tanker, centering rent, ventilator, grill works, vetrified tiles, oil paint, birla white, water base paint, pvc pipe 75 mm class 2, pvc pipe 90 mm class 2, pvc pipe 110 mm class 2, pvc pipe 140 mm class 2, pvc t and bend 75 mm, pvc t and bend 90 mm, pvc t and bend 110 mm, pvc t and bend 140 mm, toilet sheet traditional, centering wire and nails, steel door, steel windows, water meter with installation and fitting complete, rcc pipe 1000 mm with collars, rcc pipe 800 mm with collars, rcc pipe 600 mm with collars, rcc pipe 450 mm with collars, rcc pipe 300 mm with collars, air valve 50 mm, air valve 110 mm, air valve 140 and 130 mm, sluice valve 65 mm, sluice valve 50 mm, sluice valve 140 mm, led lamp 100 watt, led lamp 80 watt, led lamp 60 watt, led lamp 36 watt, led lamp 23 watt, led lamp 14 watt, led lamp 8 watt, information board, steel sheet 12*4, cement sheet 12*4, steel pipe (borewell size), nut bolt, fiber door, paving block 60 mm, paving block 80 mm, electric holder, auto switch, relay, bitumen 190 kg drum, checker tiles, 100 w flood light

State Government

CTN :45731961

04 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For construction of pucca tiled path along with retaining wall near the house of balbir singh son of sahib singh vill papahan mohal gram panchayat papahan (under deposit vkv/2025/1239)(s.h:- construction of retaining wall at rd 0/052 to 0/058 and providing and laying interlocking paver block at rd 0/050 to 0/093.50)

State Government

CTN :45734624

07 Jul, 2026 12.70 Lacs

Ernakulam - Kerala

Tender For in this estimate provisions are given for the maintenance and repair nature such as works of ceramic tiles epoxy filling for tile work dismantling toilet tiles dismantling cement concrete etc

State Government

CTN :45728722

20 Jul, 2026 NA

Uttarkashi - Uttarakhand

Tender For installation of interlocking tiles, construction of concrete drains, and protective works at the 10th and 11th kilometers of the khabli-gundiyatgaon motor road in purola development block (purola assembly constituency), uttarkashi district, under the

State Government

CTN :45305483

13 Jul, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of various types of tools & tackles and miscellaneous items for day to day maintenance works for tmd-ii gtps. - fevi kwik tube 3 grams, anabond rtv silicone 666, packing : 100 gms. for gasket sealing, metal cutting wheel (for stainless steel) size 105 x 1.2 x 16 mm., grinding disc (wheel) size 100x4x16 mm, mos 13750 high cut (a.36) ., mini angle grinder 100 mm, rust removing spray wd-40 in aersole packing of high pressure valves ., pipe vice no.6 size 12 mm to 150 mm, bench vice apex make -150 mm (6"), bench vice apex make -200 mm (8"), gi nipple 15 mmx4 long for civil work, gi nipple 1/2" x 2" long for civil work, gi nipple 1/2" x 3" long for civil work, washing powder ( 1 kg pack ), instametal (0.5 kg/pack), grinding stone (smooth) for 6"(dia.) bench grinder wolf., grinding stone (rough) for 6" bench grinder wolf, pipe wrench size 18" (450 mm) length, heavy duty pipe wrench size:24", heavy duty pipe wrench, length -200 mm, least max opening-33 mm, taparia product no- hpw 08, heavy duty pipe wrench, length -250 mm, least max opening-48 mm, taparia product no- hpw 10, white welding glass size 3.1/4"x4.1/4", atharmal (gremany) make dark green welding glass size:4 1/4x3 1/4 shed 11a 1 din, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., esab earthing clamp, cutogen-5 cutting blow pipe (cutting torch), esab/iol make gas heating torch, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura, cutting nozzle size 1/16", cutting nozzle size 3/64", needle file set jk make, taparia chisel 10" long, taparia flat chiesel 1046 150 mm length, hole punch set having 4 to 32 mm dia size, araldite 180 gram/tube, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 size-20mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 10kg/cm2 ,size; 12mm, nylon braided pvc hose pipe suitable air/water handling ;at working pressure of 15kg/cm2 ,size; 25mm id.

corporations/Associations/Others

CTN :45517763

09 Jul, 2026 59.28 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : improvement work of road by laying drain and interlocking tiles from e 511 to e 501 via e 730 and e 540/11 near krishna park in mohalla krishna vihar under zone 06 ward 23 housing development.

By Cities

By States

By Agencies

By Ownerships

By Sectors