Drilling Tenders

State Government

CTN :40425390

04 Jun, 2025 7.54 Lacs

Ludhiana - Punjab

Tender For providing and installing straight tubewell of size 150 mm id upto 130 m depth with hand boring, rising main, pumping machinery, c.i. fittings inside pump chamber at water supply scheme swaddi khurd, block sidhwan bet, distt. ludhiana

State Government

CTN :40438239

05 Jun, 2025 10.50 Lacs

Ludhiana - Punjab

Tender For providing installing new deep tube well size 200mm id up to 150mtr. depth bgl with hand boring method, rising main, pumping machinery and ci fitting inside pump chamber at water supply scheme bassraon block raikot, district. ludhiana

Central Government/Public Sector

CTN :40416958

10 Jun, 2025 NA

Dibrugarh - Assam

Tender For construction of approach road, plinth, road over plinth, eff-pit, flare pit, cc/rcc foundation as per 1000/1400 ac/scr rig including supply of all materials & equipment for drilling location omga, mongaldoi, assam under the block as-onhp-2021/3.

State Government

CTN :40418470

30 Jun, 2025 5.12 Crore

Multi City - Karnataka

Tender For tender for supply and installation of equipments and instruments to upgrade emergency department to cater trauma services at district level hospitals under national program for prevention and management of trauma and burn injuries - pneumotictourniquet, splints & traction, ultrasonography(3d) trolly based, general orthopedic instrument sets, power drill & power saw, general surgical instrument, rehabilitation equipments adl training kit, patient warming system, high vacuum suction machine, cautery machine - mono & bi polar with underwater cutting, anaesthesia machine with monitor 6-8 channel, o.t ceiling light shadow less, o.t table-4 segment, translucent top with orthopaedic attachment, portable x-ray machine 100 ma, xray machine with dark room facility 500ma, image intensifier (c-arm)

CTN :40427626

11 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of micro metric torque wrench 30to150 in lb , torque meter handle adjustable 150to750 lb in , the standard torque screwdriver range 0.5 to 36 lb in , interchangeable head for torque handle , drive ratchet std , internal hex drive size , digital micro level inclinometer 360 deg , digital caliper , piston grip screwdrivers push and trigger start clecomatic clutch , pistol grip screwdrivers push and trigger start clecomatic clutch , right angle drive , plastic hammer 325 gr , bit screwdriver 3.5mm , bit screwdriver 4mm , 9pc ball driver insert bit set 2 to 12mm , allen bit 0.78 , allen bit 0.93 , allen bit 109 , allen bit 140 , allen bit 156 , ball hex set long , phillipe bit ph1 , phillipe bit ph2 , phillipe bit ph3 , bit for torq offset cruciform bit 2mm , bit for torq offset cruciform bit 4mm , bit for torq offset cruciform bit 6mm , bit for torq offset cruciform bit 8mm , bit for torq offset cruciform bit 10mm , bit for torq offset cruciform bit 101 4 , driver for torque set 0.250 inch , screw driver 0.187 x 6.000 inch , screwdriver 0.250 x 10.000 inch , allen hex type wrench tool kit no. 7331 , socket , adapter ta3 , hex to square adaptor , extention handle , pipe plug , socket 10mm drive , adjustable wrench gaj32a , combination wrench , side cutter mini bever oval head , plier long nose 4.875 inch , wire twister cutter , pliers retaining ring and tip , flash light , ball drive power bit set of 2 to 12mm , mirror on telescope flex bar , magnet on telescope flex bar , headlamp led , stand for roll wiping paper , nut driver kit ps 120 , cable tie gun , long nose pliers , allen screwdriver 0.5 , socket 5mm with adapter to drive , side cutter , tweezers , allen key bit , torque screwdrivers 15 24 and 34 lb in , torque screwdrivers 2 4 6 8 and 10 lb in , torque brake , spudger , torque set bit , allen bit drive , torque brake over , torque screwdrivers 13 lb in , torque screwdrivers 2 7 and 8 lb in , allen key screwdriver , electrical screwing machine , pneumatic screwing machine 52 lb in , pneumatic screwing machine 35 lb in , allen bit , torque screwdrivers 13 lb in , torque screwdrivers 6 lb in , torque brake-over 3to12 lb in , torque screwdriver fixed to 6 and 8 lb in , ratchet wrench , bit philips , philips screwdriver ph1 x 80mm , flat screwdriver , custom stripmaster lite 45to659 wire stripper , locking plier jaw adj. 1.125 , flat nose plier , bahco 155mm to 6 inches , allen hex wrench ballpointset 9 pcs , allen hex type wrench ball point set 12 pcs , wera 350 ph 2 x 100 philips screw driver , wera 04x2.5 flat screw driver , gsr10.8 cordless electric screwdriver , rachet set 41 piece set , precision tweezer straight extremely fine l 110mm sharp tips , wera 247 tester , bondhus , mac panel extraction tool , mac panel extraction tool high density pin , strap wrench 0.25inches to 1.5inches , plier narrow nose flush cutting 4.000 inch , positioner for male and female crimp contacts type c12929 , k positioner for crimptool pn k127 2 for contact pin deutsch2841 5 9000 , m22520 2 06 positioner used with tool m22520 2 01 , m22520 2 09 positioner used with tool m22520 2 01 , positioner for crimping tool m22520 2 07 for tool m22520 2 01 , insertion and removal tool for m39029 57 354 , contact insertion tool with withdrawal type c12935 , m22520 2 01 hand operated terminal crimping tool , point puller tool lifter , aluminium boxes with foam cutting as per rfp micro metric torque wrench 30-150 in/lb, torque meter handle adjustable 150-750 lb/in, the standard torque bid details/ 2 / 87

CTN :40403165

10 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of bullet proof glass - hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is as per tech spec att , ismb 150 rsj 150 x 75 mm g3 400mm long for beam conforming to relevant is as per tech spec att , ismb 125 rsj 125 x 70mm g2 3.0m long for beam conforming to relevant is as per tech spec att , 6mm thick ms plate 150x150mm for shs column incl welding and nuts and bolts , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1700 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1950mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid. , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

Central Government And Public Sector

CTN :40403874

10 Jun, 2025 NA

Kinnaur - Himachal Pradesh

Tender For supply of ordinary portland cement grade 43 , stone aggregate shall be crushed stone 20mm graded , coarse sand , stone aggregate shall be crushed stone 40mm graded , rr stone , tmt steel bar 16mm dia , tmt steel bar 12mm dia , tmt steel bar 10mm dia , tmt steel bar 8 mm dia , binding wire 20 gauge , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 5 inch for shuttering , quick setting compound , pbs roll , bitumen blown type , water proofing compound , loop holes of size 600x500mm , wooden scantling 3 point 20m long section 100x75mm , steel door of size 900x1800 mm , lightning conductor , earthing , 20 watt led tube rod and all neccessary fittings , bulk head housing with led bulb , 18 w led bulb , brown matte modular electrical switch 5 amp , brown matte modular electrical switch 5 amp and socket 3 pin , brown matte modular electrical switch15 amp and socket multi purpose , pvc round or square block , casing capping double locked box type 1 inchx 6 feet long , casing capping double locked box type 1 and half inch x 6 feet long , gang box 5 switches 5 amps , gang box 3 switches 5 amps , gang box 1 switch 5 amps , self drill star screw 1 inch 200 nos , self drill star screw 2 inch 200 nos , wire 1 sqmm , wire 1 point 5 sqmm , wire 2 point 5 sqmm , mcb 6 amp single pole , mcb 16 amp single pole , mcb 32 amp single pole , isolator double pole 63 amp , insulation tape 25mm width of 9 mtr long , distribution box 12 way

Central Government And Public Sector

CTN :40403976

09 Jun, 2025 NA

Kinnaur - Himachal Pradesh

Tender For supply of ordinary portland cement grade 43 , stone aggregate shall be crushed stone 20mm graded , coarse sand , stone aggregate shall be crushed stone 40mm graded , rr stone , tmt steel bar 16mm dia , tmt steel bar 12mm dia , tmt steel bar 10mm dia , tmt steel bar 8 mm dia , binding wire 20 gauge , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 5 inch for shuttering , quick setting compound , pbs roll , bitumen blown type , water proofing compound , loop holes of size 600x500mm , wooden scantling 3 point 20m long section 100x75mm , steel door of size 900x1800 mm , lightning conductor , earthing , 20 watt led tube rod and all neccessary fittings , bulk head housing with led bulb , 18 w led bulb , brown matte modular electrical switch 5 amp , brown matte modular electrical switch 5 amp and socket 3 pin , brown matte modular electrical switch15 amp and socket multi purpose , pvc round or square block , casing capping double locked box type 1 inchx 6 feet long , casing capping double locked box type 1 and half inch x 6 feet long , gang box 5 switches 5 amps , gang box 3 switches 5 amps , gang box 1 switch 5 amps , self drill star screw 1 inch 200 nos , self drill star screw 2 inch 200 nos , wire 1 sqmm , wire 1 point 5 sqmm , wire 2 point 5 sqmm , mcb 6 amp single pole , mcb 16 amp single pole , mcb 32 amp single pole , isolator double pole 63 amp , insulation tape 25mm width of 9 mtr long , distribution box 12 way

State Government

CTN :40416371

04 Jun, 2025 51.89 Lacs

Tarn Taran - Punjab

Tender For providing and installing deep tube-well 150 mm i/d straight 120 mtr depth with hand boring machine, 10 mtr stainless strainer, construction of ohsr 25 kl capacity, pump chamber, pumping machinery, chlorinator, all civil works, etc. complete in all re

Central Government/Public Sector

CTN :40402687

04 Jun, 2025 3.13 Lacs

Mumbai - Maharashtra

Tender For supply of power drill machine , hand angle grinder with all accessories , ring spanner set , double ended open spanner wrenches set , plier set with insulated handle , screw driver bit set with handle , wire cutter set , soldering iron 25w , soldering iron 60w , spirit level , steel measuring tape , electricity supply tester , earth resistace meter , laser distance measuring device , crimping tool , allen key set , ladder , drill bit set , pipe wrench , hammer , cordless drill machine , adjustable wrench , one ended open and other end ring spanner wrenches set

By Cities

By States

By Agencies

By Ownerships

By Sectors