Industrial Gases Tenders

Central Government/Public Sector

CTN :40510570

24 Jun, 2025 1.00 Lacs

Patna - Bihar

Tender For corrigendum : supply of dissolve acetylene gas as per is 308 (q3)

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40699418

23 Jun, 2025 NA

Vadodara - Gujarat

Tender For supply of set of flash back arrestor (dry type) for gas regulator ends. each set consist of 02 nos. flashback arrest ors (i) 1 no. flash back arrestor for regulator end of oxygen gas lines (ii) 1 no. flash back arrestor for regulator end o f acetylene/lpg gas lines. detail specification mentioned in attached annexure-a. make : esab/ador/d&h secheron. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40700219

03 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For supply, installation and commissioning of automatic fire detection and suppression system in lng dpcs as per specification no. is/rdso/cg/s/22001 with amendment no.1 dt-09.09.2024 [ warrant y period: 36 months after the date of delivery ]

corporations/Associations/Others

CTN :40696272

21 Jun, 2025 NA

Pune - Maharashtra

Tender For purchase of miscellaneous items for pmc vehicle - fevi kwik ( 1 gm pack), anabond tube white color (25 gm pack), anabond tube white color ( 100 gm pack), anabond tube red color (85 gm pack), araldite ( 9 gm pack), m-seal (100gm pack), loctite 50ml, shellack bottle (30ml), rust lick spray (370 ml pack), rust lick spray (133 ml pack), carbueretter spray (500 ml), 3m high power brake cleaner spray (397 ml pack), teflon tape (roll of 5 mtr.), cable tie (10" packet of 100 pieces), cable tie (12" packet of 100 pieces), sulfuric acid diluted (for battery), blow heater brass 1 litre, nitric acid concentrated (for solder), distilled water, oxygen acetylene regulator repair, major repair, minor repair, oxygen / acetylene pressure meter, gas cutter repair, major repair, minor repair, oxygen / pressure guage knob, solder gun (small), solder gun (big), hydrometer, kalai ( tinning material), solder rod, solder khadya, zn sheet size (), mounting rubber with ms washer and castle nut bolt (cabin foundation) square / round, radiator mounting rubber with bolt and washer, water tanker foundation rubber (size 6"x10"x1" thick), hose clips, hose clip m00, hose clip 000, hose clip 1, hose clip 1a, hose clip 2, hose clip 2a, hose clip 3, hose clip 4, clip bolt with nut, 5/16" x 4", 3/8 x 4", 1/2" x 4", u clamp washer, u clamp washer 5/8", u clamp washer 6/8", u clamp washer 7/8", shims washer, 4mm for tata 709, 4mm for tata 1612, 4mm for tata 2518, grease nipple, grease nipple tata 709, grease nipple tata 2516, grease nipple with adapter leyland, plain washer, m6, m8, m10, m12, m14, spring washer, m6, m8, m10, m12, m14, m16, dowty washer, dowty washer 1/8", dowty washer 1/4", dowty washer 3/8", dowty washer 1/2", dowty washer 3/4", cotter pin, 1/8"x1", 1/8"x11/2", 1/8"x2", 1/8"x3", 1/4"x3", coil, m6, m8, m10, m12, m14, m16, pop rivets packet of 1000 nos, pop rivets 3/16 x 1", pop rivets 3/16 x 3/4", polyurethane pipe, polyurethane pipe 6x4mm, polyurethane pipe 8x4mm, joint pipe, joint pipe seam less ms tata 709, joint pipe seam less ms tata 1612 / 2516, joint pipe seam less ms tata 2518 / leyland 2516, ms joint pipe tata ace, gi pipe 3" od, axle packing, axle packing tata 709, axle packing tata 1210 / 1612, axle packing leyland, differential packing, differential packing tata 709, differential packing tata 1210 / 1612, differential packing tata leyland, pto packing, pto packing tata 709, pto packing tata 1210 / 1612 /2518, pto packing leyland, bosch pump packing, bosch pump packing tata 709, bosch pump packing tata 712 / 1612 / 2518, bosch pump packing tata 2516, side cooler plate pkg, side cooler plate pkg tata 709, side cooler plate pkg tata 1612, chamber packing, chamber packing 709, chamber packing 1612, bell crank washer 4 mm thick tata 2516 / leyland 2516, square tipper pad set ( nut bolt and washer) - leyland, square tipper pad set ( nut bolt and washer) - tata, number plate, acrylic 4 mm front side for cars, acrylic 4 mm rear side for cars, acrylic 4 mm with rto number plate for prabhag samiti, acrylic 4 mm with high security number plate pasting for prabhag samiti, brass word name plate with pmc logo with number plate, acrylic 4 mm block number plate, acrylic 4 mm block name and number plate with pmc logo, radium lettering " ", size 12" x 2", size 18" x 5", size 23" x 5", radium lettering " ", size 12" x 2", size 18" x 5", size 23" x 5", number plate guard (set of 2 pieces), air pipe samsun make, 8mm, 19mm, 24mm, flexible pipe (for wire cover), flexible pipe 8 no. (for wire cover), flexible pipe 10 no.(for wire cover), flexible pipe 12 no. (for wire cover), flexible pipe 15 no. (for wire cover), transparent pipe spring type, dia 1", dia 11/2", hydraulic suction hose id 2" length 45", air cleaner rubber hose tata 709 sfc, oil paper, size - 2x2 thin, size - 2x2 medium, size - 2x2 thick, helite paper, size - 2x2 medium, size - 2x2 thick, cutting oil, ball valve cock, 2 ball valve (for water tanker), ball valve cock 2 1/2" for water tanker, ball

Central Government/Public Sector

CTN :40693958

02 Jul, 2025 9.00 Lacs

Delhi - Delhi

Tender For refilling of novac gas cylinder-re-filling of perfluoro(2-methyl-3-pentanone) fluorinated ketonewaterless water or dry water (novec 1230 / fk-5-1-12)

Central Government/Public Sector

CTN :40686498

23 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of n9a1y38958_ acetylene gas as per is 308 /88 rev. iii

Central Government/Public Sector

CTN :40694133

16 Jun, 2025 19.98 Lacs

Coimbatore - Tamil Nadu

Tender For supply of liquefied natural gas (lng) for lng trucks at icd/igu

corporations/Associations/Others

CTN :40170804

20 Jun, 2025 1.89 Crore

Gulbarga - Karnataka

Tender For corrigendum : providing of supply of liquid medical oxygen (lmo) - kilograms; cryogenic storage tanks; steel,refilling of medical gases in cylinders,refilling of medical gases in cylinders,refilling of medical gases in cylinders,refilling of medical gases in cylinders,refilling of medical gases in cylinders,refilling of medical gases in cylinders,refilling of medical gases in cylinders

Central Government And Public Sector

CTN :40703820

24 Jun, 2025 NA

Kalpakkam - Tamil Nadu

Tender For providing of refilling of industrial gases in cylinders - oxygen; cubic meter,refilling of industrial gases in cylinders - dissolved acetylene gas (as per is:308-1988); cubic meter

By Cities

By States

By Agencies

By Ownerships

By Sectors