Get complete information related to latest Lab Equipments Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lab Equipments Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lab Equipments Tenders.
Tender For supply and installation of one number of aerosol generator 500 gms ( fire detection and suppression catridge) in lavatory for lhb coaches. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025,as per drawing: annexure-g of rdso/pe/spec/ac/0184-2015(rev-1) or annexure-g.1 of rdso/pe/spec/ac/0192(rev-1) also permitted, packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage , if any , shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply, installation, testing and commissioning of fire fighting system including aerosol based fire suppression system, lightning arrester and 250 kva diesel generator set in new chc papadahandi of nabarangpur dist. 2025-26.
Tender For supply, installation, testing and commissioning of firefighting system including aerosol based fire suppression system, lighting arrester, 500 kva diesel generator set and pressurization system for lifts in mch , nabarangpur of nabarangpur dist., 2025-26.
Tender For supply of aerosol generator 500 gm ( fire detection and suppression catridge) for train set coaches to drawing number ts/mc-6-4-013, alt-a item- 1. and as per the technical requirement specified in annexure-g of rdso. spec. rdso/pe/spec/ac/0184-2015 (rev-1). note: annexure g1 of rdso specification rdso/pe/spec/0192 (rev-1) [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : tender for supply of spares of water jet machine - hp seal assembly part no 20422243 , liner hp cylinder part no 20497767 , hydraulic catridge seal assembly part no 5130091 , valve seat part no 10178697 , seal assembly part no 20428052 , abrasive feed tube part no 20453964 , spring check valve part no 5147863 , ring backup pneumatic part no 10188233 , ring backup pneumatic part no 10187250 , stem pneumatic valve part no 20435636 , hp nipple tube 9 by 16 inch l 257 mm part no 5105473 , nozzle tube hp part no 10138428 , filter element 10 micron part no 72125264 , pure goop part no 10084440 , focusing tube 1 point 1 part no 1000005 43 313 , orifice saphire 0 point 3 part no 80230
Tender For corrigendum : procurement of maint items - led 07 watt lamp b 22 base , led 12 watt lamp b 22 base , led bulb 14 or 15 watt b22 base , led 5 watt b 22 base lamp , led highway flood light with high luminous efficiency input power 150 watt , led street light 60 watt 240 volt ip 66 , led street light 30 or 36 watt 240 volt ip 66 , led post top lanten 40 or 45 watt 240 volt ip 66 50 hz , led highway flood light with high luminous 80 or 90 watt 240 volt ip 66 , led flood light 160 watt 50 hz 240 volt , led round ceiling 8 or 10 watt down light , led round ceiling 12 watt down light , led flood light 60 watt , led street light 90 watt , ledz inverter batten 20 watt cdl 1800 lumen , led cob downlight 100l watt 6 watt , led cob downlight 100l watt 12 watt , ledz inverter lamps 9 watt 900lm and back up lumen of 300 lm , led facade light 120 watt , led pannel light 4x1 feet 36 or 40 watt , led aviation light 10 or 12 watt , suspended type led light 1 x 60 w , flame proof led light 1 x 20 w , industrial type recessed mounted 45 watt led light , mcb sp 10 amps c curve , mcb sp 16 amps c curve , mcb sp 20 amps c curve , mcb sp 6 amps c curve , mcb spn 10 amps c curve , mcb spn 16 amps c curve , mcb spn 20 amps c curve , mcb spn 32 amps c curve , mcb spn 40 amps c curve , mcb spn 63 amps c curve , mcb tpn 32 amps c curve , mcb tpn 63 amps c curve , mccb 250 amps 36 ka 4 pole , mccb 400 amps 36 ka 4 pole with spreader link , mccb 100 amps 415 volts 4 pole 16 ka , mccb 125 amps 4 pole 16 ka , mccb 200 amps 4 pole 415 volts 36 kva , mccb 63 amps 4 pole 415 volts 16 ka , mccb 160 amps 4 pole 415 volt 25 ka , mccb 4 pole 320 amps 415 volt 50 hz , mcb sp 06 amps 10ka b curve , mcb sp 16 amps 10ka b curve , mcb sp 20 amps 10ka b curve , mcb sp 25 amps 10ka b curve , mcb sp 40 amps 10ka b curve , mcb sp 63 amps 10 ka b curve , mcb dp 10 amps 10ka b curve , mcb dp 16 amps 10ka b curve , mcb dp 20 amps 10ka b curve , mcb dp 32 amps 10ka b curve , mcb dp 40 amps 10ka b curve , mcb four pole 32 amps 10ka b curve , mcb four pole 63 amps 10ka b curve , angular holder backlite 5 or 6 amps , aparture plate with 6 hole for geyser of capacity 25 or 50 ltr , aparture plate with 9 hole for geyser of capacity 25 or 50 ltr , bus bar chamber 63 amps 4 pole 415 volts ac , bus bar chamber 200 amps 4 pole 415 volts ac , cable frls pvc insulated sheathed with aluminium conductor 1100v 2 core x 6 sqmm , cable frls pvc insulated sheathed with aluminium conductor 1100v 2 core x 10sqmm , cable frls pvc insulated with copper conductor 1100v single core x 1.5 sqmm , cable frls cable pvc insulated with copper conductor 1100v single core 2.5 sqmm , call bell buzzar 2 amps , capacitor for ceiling fan 2.5 mfd oil type , ceiling fan rubber insulator small , chlorine testing kit with all testing fitments ot solution in rexene box , compression type aluminium lugs suitable for 120 sqmm , compression type aluminium lugs suitable for 16 sqmm , compression type aluminium lugs suitable for 25sqmm , compression type aluminium lugs suitable for 35sqmm , compression type aluminium lugs suitable for 50 sqmm , compression type aluminium lugs suitable for 70 sqmm , compression type aluminium lugs suitable for 95 sqmm , connection pipe for geyser 15 x 600 mm , copper sulphate cuso4-5.h2o chemical for busting the copper earth pit , cp push cock 15 mm heavy duty outter thrade type , cp pull cock 15 mm heavy duty outter thrade type , fuse wire tinned copper 60 and 100 amps 200 gm per roll each 1 kg , fuse wire tinned copper 30 and 40 amps 200 gm per roll each 2 kg , gric compound for earthing boosting compound , heating element for geyser trangular type 2 kw , heating element for geyser 1.5 kw clamp type , hdt bitumen tape self adhesive 25 mm 5 mtr roll , thermostat for geyser 25 litre 2 kw , modular fan regulator for harmfree 0-4 step 2 modolar , modular switch 16 amps 3 pin 230 volt , modular socket 6 or 16 amps 2 modolar , modular socket shutterd 6 or 16 amps 3 modolar , modular shocket 6 a
Tender For printer cartridge refilling/parts, printer spare parts, computer accessories at uda office. (arc) 2315 - item code [c1-2026.]:item type [electrical] :: providing and fixing of 128 gb ssd (make : adata / hp / wd) complete as directed by engineer-in-charge., item code [c10-2026.]:item type [electrical] ::providing and fixing / servicing of computer formatting and general servicing complete at uda office as directed by engineer-in-charge., item code [c11-2026.]:item type [electrical] ::providing and fixing of laser printer (hp / canon / brother) complete as directed by engineer-in-charge., item code [c12-2026.]:item type [electrical] ::providing and installation of antivirus software (quick heal / eset / symantec) complete as directed by engineer-in-charge., item code [c13-2026.]:item type [electrical] :: providing and fixing of ups 600 va (i-ball / elnova / apc / zebronics) complete as directed by engineer-in-charge., item code [c14-2026.]:item type [electrical] ::providing and fixing of ups 1 kva (i-ball / elnova / apc / zebronics) complete as directed by engineer-in-charge., item code [c15-2026.]:item type [electrical] ::providing and fixing of printer parts (hp original / canon original) complete as directed by engineer-in-charge., item code [c16-2026.]:item type [electrical] ::providing and fixing of printer logic card (hp / canon / brother) complete as directed by engineer-in-charge., item code [c17-2026.]:item type [electrical] ::printer servicing and general maintenance complete as directed by engineer-in-charge., item code [c18-2026.]:item type [electrical] ::providing and laying of lan cable cat-6 (d-link / digisol / molex) complete as directed by engineer-in-charge., item code [c19-2026]:item type [electrical] :: providing and fixing of toner cartridge (hp original / canon original) complete as directed by engineer-in-charge., item code [c2-2026.]:item type [electrical] ::providing and fixing of 256 gb ssd (make : adata / hp / wd) complete as directed by engineer-in-charge., item code [c20-2026]:item type [electrical] ::providing and supplying of 32 gb pen drive (sandisk / hp / kingston) complete as directed by engineer-in-charge., item code [c21-2025]:item type [electrical] ::providing and supplying of 64 gb pen drive (sandisk / hp / kingston) complete as directed by engineer-in-charge., item code [c22-2026]:item type [electrical] ::providing and fixing of patch cord 1 mtr (d-link / digisol / molex) complete as directed by engineer-in-charge., item code [c23-2026]:item type [electrical] ::providing and fixing of mouse (zebronics / i-ball / dell) complete as directed by engineer-in-charge., item code [c24-2026]:item type [building] ::providing and fixing of smps (zebronics / i-ball / intex) complete as directed by engineer-in-charge., item code [c25-2026]:item type [electrical] ::providing and fixing of battery 12v 7ah (rocket / exide / luminous) complete as directed by engineer-in-charge., item code [c26-2025]:item type [electrical] ::computer mother board repair / general complete as directed by engineer-in-charge., item code [c27-2026]:item type [electrical] ::providing and fixing of graphic card (nvidia) complete as directed by engineer-in-charge., item code [c28-2026]:item type [electrical] ::providing and fixing of ram ddr4 4gb (hynix / kingston / crucial) complete as directed by engineer-in-charge., item code [c29-2026]:item type [electrical] ::providing and fixing of colour xerox machine cartridge set (canon original) complete as directed by engineer-in-charge., item code [c3-2026.]:item type [electrical] ::supply of 1 tb external hard disk complete as directed by engineer-in-charge., item code [c30-2026]:item type [electrical] ::providing and fixing of black & white cartridge (canon original / hp original) complete as directed by engineer-in-charge., item code [c31-2026]:item type [electrical] :: xerox machine repair / general complete as directed by engineer-in-charge., item code [c32-2026]:item type [ele
Tender For purchase of machinery and equipment for the heat power engineering laboratory, department of mechanical engineering - procurement of machinery and equipment for the heat power engineering laboratory, department of mechanical engineering, multi cylinder petrol engine test four stroke, water cooled petrol engine with self-start assembly . mechanical rope brake with spring balance for loading. number of cylinders: 4 with cut off arrangement. power : 4 -10 hp , speed 1500 - 3500 rpm , capacity: 1500 cc or near values. brand material : mild steel engine and loading arrangement fitted with rigid frame along with cooling water inlet and outlet piping arrangement, air stabilizing tank with u tube manometer setup for volumetric test and fuel tank. heavy -duty fabricated ms base frame anti -vibration mounting arrangement powder -coated / painted finish, air compressor test rig single acting - double stage air compressor with inter cooler and after cooler setup. 1 phase / 3 phase motor with 1 hp motor starter and with all standard accessories(air stabilizing tank with pressure gauge of max pressure limit 15 kg/cm 2 , safety valves , orifice meter with u tube manometer to measure the pressure difference).